Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7475): Process ended prematurely: osmo-stp_10.42.42.5(pid=7475) [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7475)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 04:15:23.271401 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.283251 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:15:23.427053 tst cs_paging_gprs_active.py: using LAC 38478 04:15:23.554527 tst cs_paging_gprs_active.py: using RAC 228 04:15:23.681851 tst cs_paging_gprs_active.py: using CellId 38478 04:15:23.803686 tst cs_paging_gprs_active.py: using BVCI 38479 04:15:23.827083 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.837981 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.848559 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.859190 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.869698 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.880661 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.891759 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.902409 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:15:23.913486 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:15:24.036266 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:15:24.315318 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:15:24.442041 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:15:24.758466 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7465): Launched 04:15:25.021629 run iperf3-srv_10.42.42.10(pid=7466): Launched 04:15:25.206159 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:15:25.333193 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:15:25.648505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7467): Launched 04:15:25.910589 run iperf3-srv_10.42.42.10(pid=7468): Launched 04:15:26.095311 tst cs_paging_gprs_active.py:38: start network... 04:15:26.220927 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:15:26.709149 run create_hlr_db(pid=7469): Launched 04:15:26.882570 bus /gobi_6: Setting Powered False 04:15:27.905388 run create_hlr_db(pid=7469): Terminated: ok {rc=0} 04:15:28.341071 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7471): Launched 04:15:28.669968 run osmo-hlr_10.42.42.2(pid=7472): Launched 04:15:28.793065 run osmo-stp_10.42.42.5: Starting osmo-stp 04:15:29.360502 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7474): Launched 04:15:29.687924 run osmo-stp_10.42.42.5(pid=7475): Launched 04:15:29.806653 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:15:30.376879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7477): Launched 04:15:30.493332 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:15:30.778843 run patchelf(pid=7478): Launched 04:15:30.987597 run osmo-stp_10.42.42.5(pid=7475): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7475)] 04:15:31.134457 run osmo-stp_10.42.42.5(pid=7475): stdout: | (launched: 2022-12-14_04:15:29.526451) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:15:31.288790 run osmo-stp_10.42.42.5(pid=7475): stderr: | �[0;m�[38;5;43m20221214041529720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041529720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041529720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041529721 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041529721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041529721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041529721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:15:31.421669 run osmo-stp_10.42.42.5(pid=7475): stdout: | (launched: 2022-12-14_04:15:29.526451) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:15:31.550459 run osmo-stp_10.42.42.5(pid=7475): stderr: | �[0;m�[38;5;43m20221214041529720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041529720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041529720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041529721 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041529721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041529721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041529721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:15:31.701989 run patchelf(pid=7478): Terminating (SIGINT) 04:15:31.876022 run patchelf(pid=7478): Terminated: ok {rc=0} 04:15:31.909726 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7475): Process ended prematurely: osmo-stp_10.42.42.5(pid=7475) [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7475)] [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 04:15:31.919943 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 04:15:31.981864 run osmo-hlr_10.42.42.2(pid=7472): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7472)] 04:15:32.032063 run osmo-hlr_10.42.42.2(pid=7472): stdout: | (launched: 2022-12-14_04:15:28.507562) 04:15:32.084361 run osmo-hlr_10.42.42.2(pid=7472): stderr: | �[0;m�[1;31m20221214041528707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214041528707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214041528707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214041528707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214041528707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214041528707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214041528721 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214041528729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214041528729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214041528729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:15:32.129152 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7465): Terminating (SIGTERM) 04:15:32.169887 run iperf3-srv_10.42.42.10(pid=7466): Terminating (SIGTERM) 04:15:32.210682 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7467): Terminating (SIGTERM) 04:15:32.251601 run iperf3-srv_10.42.42.10(pid=7468): Terminating (SIGTERM) 04:15:32.291433 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7471): Terminating (SIGTERM) 04:15:32.331504 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7474): Terminating (SIGTERM) 04:15:32.371221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7477): Terminating (SIGTERM) 04:15:32.380667 --- ParallelTerminationStrategy: PID 7465 died... 04:15:32.433984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7465): Terminated: ok {rc=0} 04:15:32.443603 --- ParallelTerminationStrategy: PID 7466 died... 04:15:32.496515 run iperf3-srv_10.42.42.10(pid=7466): Terminated {rc=256} 04:15:32.506139 --- ParallelTerminationStrategy: PID 7467 died... 04:15:32.559116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7467): Terminated: ok {rc=0} 04:15:32.568645 --- ParallelTerminationStrategy: PID 7468 died... 04:15:32.621682 run iperf3-srv_10.42.42.10(pid=7468): Terminated {rc=256} 04:15:32.631271 --- ParallelTerminationStrategy: PID 7471 died... 04:15:32.684444 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7471): Terminated: ok {rc=0} 04:15:32.694100 --- ParallelTerminationStrategy: PID 7474 died... 04:15:32.747160 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7474): Terminated: ok {rc=0} 04:15:32.756775 --- ParallelTerminationStrategy: PID 7477 died... 04:15:32.810015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7477): Terminated: ok {rc=0} 04:15:32.894547 bus /gobi_0: Setting Powered False 04:15:33.996551 bus /gobi_0: Setting Powered False 04:15:35.106646 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7475): Process ended prematurely: osmo-stp_10.42.42.5(pid=7475) [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7475)]