Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9126): Process ended prematurely: osmo-stp_10.42.42.5(pid=9126) [trial-2399↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9126)]
Standard Output
---------------------------------------------- trial-2399 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 04:35:19.886963 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:19.898366 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 04:35:20.045929 tst switch_tch_pdch.py: using LAC 38583 04:35:20.159353 tst switch_tch_pdch.py: using RAC 78 04:35:20.273093 tst switch_tch_pdch.py: using CellId 38583 04:35:20.387020 tst switch_tch_pdch.py: using BVCI 38584 04:35:20.409839 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.420796 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.431643 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.442641 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.453575 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.464399 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.475362 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:35:20.486267 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 04:35:20.604533 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 04:35:20.875822 tst switch_tch_pdch.py:51: start network... 04:35:20.997068 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:35:21.442668 run create_hlr_db(pid=9120): Launched 04:35:21.562355 bus /gobi_6: Setting Powered False 04:35:22.645482 run create_hlr_db(pid=9120): Terminated: ok {rc=0} 04:35:23.017602 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9122): Launched 04:35:23.310561 run osmo-hlr_10.42.42.2(pid=9123): Launched 04:35:23.421279 run osmo-stp_10.42.42.5: Starting osmo-stp 04:35:23.910423 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9125): Launched 04:35:24.203489 run osmo-stp_10.42.42.5(pid=9126): Launched 04:35:24.308540 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:35:24.800144 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9128): Launched 04:35:24.905443 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:35:25.163071 run patchelf(pid=9129): Launched 04:35:25.335928 run osmo-stp_10.42.42.5(pid=9126): ERR: Terminated: ERROR {rc=1} [trial-2399↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9126)] 04:35:25.462331 run osmo-stp_10.42.42.5(pid=9126): stdout: | (launched: 2022-12-14_04:35:24.059197) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:35:25.589203 run osmo-stp_10.42.42.5(pid=9126): stderr: | �[0;m�[38;5;43m20221214043524226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043524227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043524227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043524227 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043524228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043524228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043524228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:35:25.711097 run osmo-stp_10.42.42.5(pid=9126): stdout: | (launched: 2022-12-14_04:35:24.059197) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:35:25.831565 run osmo-stp_10.42.42.5(pid=9126): stderr: | �[0;m�[38;5;43m20221214043524226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043524227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043524227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043524227 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043524228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043524228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043524228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:35:25.972099 run patchelf(pid=9129): Terminating (SIGINT) 04:35:26.137371 run patchelf(pid=9129): Terminated: ok {rc=0} 04:35:26.167419 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=9126): Process ended prematurely: osmo-stp_10.42.42.5(pid=9126) [trial-2399↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9126)] [trial-2399↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 04:35:26.176103 tst switch_tch_pdch.py:54: Test FAILED (6.3 sec) 04:35:26.235478 run osmo-hlr_10.42.42.2(pid=9123): ERR: Terminated: ERROR {rc=237} [trial-2399↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9123)] 04:35:26.284080 run osmo-hlr_10.42.42.2(pid=9123): stdout: | (launched: 2022-12-14_04:35:23.166236) 04:35:26.333337 run osmo-hlr_10.42.42.2(pid=9123): stderr: | �[0;m�[1;31m20221214043523340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214043523340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214043523340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214043523340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214043523340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214043523340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214043523352 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214043523361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214043523361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214043523361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:35:26.375139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9122): Terminating (SIGTERM) 04:35:26.414570 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9125): Terminating (SIGTERM) 04:35:26.453998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9128): Terminating (SIGTERM) 04:35:26.463122 --- ParallelTerminationStrategy: PID 9122 died... 04:35:26.515650 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9122): Terminated: ok {rc=0} 04:35:26.525152 --- ParallelTerminationStrategy: PID 9125 died... 04:35:26.577475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9125): Terminated: ok {rc=0} 04:35:26.586901 --- ParallelTerminationStrategy: PID 9128 died... 04:35:26.639435 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9128): Terminated: ok {rc=0} 04:35:26.722929 bus /gobi_0: Setting Powered False 04:35:27.830827 bus /gobi_0: Setting Powered False 04:35:28.943953 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9126): Process ended prematurely: osmo-stp_10.42.42.5(pid=9126) [trial-2399↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9126)]