Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10237): Process ended prematurely: osmo-stp_10.42.42.5(pid=10237) [trial-2399↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10237)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 04:47:20.228304 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.239943 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 04:47:20.399238 tst ping_idle_ping.py: using LAC 38647 04:47:20.515776 tst ping_idle_ping.py: using RAC 142 04:47:20.631873 tst ping_idle_ping.py: using CellId 38647 04:47:20.747857 tst ping_idle_ping.py: using BVCI 38648 04:47:20.770978 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.782027 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.792735 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.803508 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.814283 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.825106 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.835922 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:47:20.846712 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:47:21.141039 tst ping_idle_ping.py:24: start network... 04:47:21.276026 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:47:21.789695 run create_hlr_db(pid=10231): Launched 04:47:21.977822 bus /gobi_6: Setting Powered False 04:47:22.999273 run create_hlr_db(pid=10231): Terminated: ok {rc=0} 04:47:23.407311 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10233): Launched 04:47:23.709397 run osmo-hlr_10.42.42.2(pid=10234): Launched 04:47:23.829619 run osmo-stp_10.42.42.5: Starting osmo-stp 04:47:24.357658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10236): Launched 04:47:24.660366 run osmo-stp_10.42.42.5(pid=10237): Launched 04:47:24.770621 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:47:25.294760 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10239): Launched 04:47:25.400922 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:47:25.665081 run patchelf(pid=10240): Launched 04:47:25.840520 run osmo-stp_10.42.42.5(pid=10237): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10237)] 04:47:25.969246 run osmo-stp_10.42.42.5(pid=10237): stdout: | (launched: 2022-12-14_04:47:24.509456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:26.098225 run osmo-stp_10.42.42.5(pid=10237): stderr: | �[0;m�[38;5;43m20221214044724680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044724680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044724680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044724680 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044724681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044724681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044724681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:26.221972 run osmo-stp_10.42.42.5(pid=10237): stdout: | (launched: 2022-12-14_04:47:24.509456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:26.344762 run osmo-stp_10.42.42.5(pid=10237): stderr: | �[0;m�[38;5;43m20221214044724680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044724680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044724680 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044724680 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044724681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044724681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044724681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:26.487566 run patchelf(pid=10240): Terminating (SIGINT) 04:47:26.656729 run patchelf(pid=10240): Terminated: ok {rc=0} 04:47:26.687486 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10237): Process ended prematurely: osmo-stp_10.42.42.5(pid=10237) [trial-2399↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10237)] [trial-2399↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 04:47:26.696211 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 04:47:26.755882 run osmo-hlr_10.42.42.2(pid=10234): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10234)] 04:47:26.804406 run osmo-hlr_10.42.42.2(pid=10234): stdout: | (launched: 2022-12-14_04:47:23.559842) 04:47:26.853629 run osmo-hlr_10.42.42.2(pid=10234): stderr: | �[0;m�[1;31m20221214044723734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214044723734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214044723734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214044723734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214044723734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214044723734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214044723746 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214044723754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214044723754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214044723754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:47:26.895494 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10233): Terminating (SIGTERM) 04:47:26.934998 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10236): Terminating (SIGTERM) 04:47:26.974459 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10239): Terminating (SIGTERM) 04:47:26.983732 --- ParallelTerminationStrategy: PID 10233 died... 04:47:27.036402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10233): Terminated: ok {rc=0} 04:47:27.046084 --- ParallelTerminationStrategy: PID 10236 died... 04:47:27.098589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10236): Terminated: ok {rc=0} 04:47:27.108519 --- ParallelTerminationStrategy: PID 10239 died... 04:47:27.161058 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10239): Terminated: ok {rc=0} 04:47:27.243716 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10237): Process ended prematurely: osmo-stp_10.42.42.5(pid=10237) [trial-2399↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10237)]