Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6270): Process ended prematurely: osmo-stp_10.42.42.5(pid=6270) [trial-2399↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6270)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py ---------------------------------------------- 04:02:08.751019 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:08.764292 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:02:08.917845 tst ping_idle_ping.py: using LAC 38406 04:02:09.042403 tst ping_idle_ping.py: using RAC 156 04:02:09.166323 tst ping_idle_ping.py: using CellId 38406 04:02:09.290279 tst ping_idle_ping.py: using BVCI 38407 04:02:09.315090 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.327014 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.338641 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.350438 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.362289 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.374286 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.386377 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:02:09.398329 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:02:09.692333 tst ping_idle_ping.py:24: start network... 04:02:09.826327 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:02:10.339007 run create_hlr_db(pid=6264): Launched 04:02:10.527038 bus /gobi_6: Setting Powered False 04:02:11.547265 run create_hlr_db(pid=6264): Terminated: ok {rc=0} 04:02:11.954343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6266): Launched 04:02:12.257684 run osmo-hlr_10.42.42.2(pid=6267): Launched 04:02:12.371968 run osmo-stp_10.42.42.5: Starting osmo-stp 04:02:12.896722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6269): Launched 04:02:13.202122 run osmo-stp_10.42.42.5(pid=6270): Launched 04:02:13.311972 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:02:13.836228 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6272): Launched 04:02:13.942723 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:02:14.207199 run patchelf(pid=6273): Launched 04:02:14.383082 run osmo-stp_10.42.42.5(pid=6270): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6270)] 04:02:14.511861 run osmo-stp_10.42.42.5(pid=6270): stdout: | (launched: 2022-12-14_04:02:13.051045) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:02:14.641105 run osmo-stp_10.42.42.5(pid=6270): stderr: | �[0;m�[38;5;43m20221214040213222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040213222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040213223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040213223 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040213223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040213224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040213224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:02:14.765186 run osmo-stp_10.42.42.5(pid=6270): stdout: | (launched: 2022-12-14_04:02:13.051045) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:02:14.888025 run osmo-stp_10.42.42.5(pid=6270): stderr: | �[0;m�[38;5;43m20221214040213222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040213222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040213223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040213223 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040213223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040213224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040213224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:02:15.031477 run patchelf(pid=6273): Terminating (SIGINT) 04:02:15.200057 run patchelf(pid=6273): Terminated: ok {rc=0} 04:02:15.230851 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6270): Process ended prematurely: osmo-stp_10.42.42.5(pid=6270) [trial-2399↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6270)] [trial-2399↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27] 04:02:15.239687 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 04:02:15.299647 run osmo-hlr_10.42.42.2(pid=6267): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6267)] 04:02:15.348781 run osmo-hlr_10.42.42.2(pid=6267): stdout: | (launched: 2022-12-14_04:02:12.107093) 04:02:15.398601 run osmo-hlr_10.42.42.2(pid=6267): stderr: | �[0;m�[1;31m20221214040212283 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214040212283 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214040212283 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214040212283 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214040212283 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214040212283 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214040212296 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214040212306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214040212306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214040212306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:02:15.440469 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6266): Terminating (SIGTERM) 04:02:15.480035 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6269): Terminating (SIGTERM) 04:02:15.519527 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6272): Terminating (SIGTERM) 04:02:15.528687 --- ParallelTerminationStrategy: PID 6266 died... 04:02:15.581547 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6266): Terminated: ok {rc=0} 04:02:15.591026 --- ParallelTerminationStrategy: PID 6269 died... 04:02:15.643897 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6269): Terminated: ok {rc=0} 04:02:15.653815 --- ParallelTerminationStrategy: PID 6272 died... 04:02:15.706481 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6272): Terminated: ok {rc=0} 04:02:15.795462 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6270): Process ended prematurely: osmo-stp_10.42.42.5(pid=6270) [trial-2399↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6270)]