Failed
dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=19043): Process ended prematurely: osmo-stp_10.42.42.5(pid=19043) [trial-2400↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19043)]
Standard Output
---------------------------------------------- trial-2400 dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 06:43:08.377080 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:08.388593 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 06:43:08.546675 tst switch_tch_pdch.py: using LAC 39114 06:43:08.668763 tst switch_tch_pdch.py: using RAC 99 06:43:08.790482 tst switch_tch_pdch.py: using CellId 39114 06:43:08.911355 tst switch_tch_pdch.py: using BVCI 39115 06:43:08.934854 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:08.946570 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:08.957999 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:08.969825 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:08.982402 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:08.994757 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:09.007244 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 06:43:09.019724 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 06:43:09.143044 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 06:43:09.427441 tst switch_tch_pdch.py:51: start network... 06:43:09.555871 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:43:10.038176 run create_hlr_db(pid=19037): Launched 06:43:10.215569 bus /gobi_6: Setting Powered False 06:43:11.235475 run create_hlr_db(pid=19037): Terminated: ok {rc=0} 06:43:11.642480 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19039): Launched 06:43:11.951924 run osmo-hlr_10.42.42.2(pid=19040): Launched 06:43:12.068941 run osmo-stp_10.42.42.5: Starting osmo-stp 06:43:12.603277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19042): Launched 06:43:12.910386 run osmo-stp_10.42.42.5(pid=19043): Launched 06:43:13.022708 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:43:13.558550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19045): Launched 06:43:13.668307 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:43:13.936495 run patchelf(pid=19046): Launched 06:43:14.116187 run osmo-stp_10.42.42.5(pid=19043): ERR: Terminated: ERROR {rc=1} [trial-2400↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19043)] 06:43:14.247935 run osmo-stp_10.42.42.5(pid=19043): stdout: | (launched: 2022-12-14_06:43:12.758654) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:43:14.379736 run osmo-stp_10.42.42.5(pid=19043): stderr: | �[0;m�[38;5;43m20221214064312930 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064312930 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064312930 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064312931 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064312931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064312931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064312931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:43:14.506706 run osmo-stp_10.42.42.5(pid=19043): stdout: | (launched: 2022-12-14_06:43:12.758654) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:43:14.632703 run osmo-stp_10.42.42.5(pid=19043): stderr: | �[0;m�[38;5;43m20221214064312930 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064312930 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064312930 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064312931 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064312931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064312931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064312931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:43:14.779098 run patchelf(pid=19046): Terminating (SIGINT) 06:43:14.950795 run patchelf(pid=19046): Terminated: ok {rc=0} 06:43:14.981931 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=19043): Process ended prematurely: osmo-stp_10.42.42.5(pid=19043) [trial-2400↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19043)] [trial-2400↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 06:43:14.990809 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 06:43:15.050494 run osmo-hlr_10.42.42.2(pid=19040): ERR: Terminated: ERROR {rc=237} [trial-2400↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19040)] 06:43:15.099379 run osmo-hlr_10.42.42.2(pid=19040): stdout: | (launched: 2022-12-14_06:43:11.798226) 06:43:15.148808 run osmo-hlr_10.42.42.2(pid=19040): stderr: | �[0;m�[1;31m20221214064311976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214064311976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214064311976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214064311976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214064311976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214064311976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214064311988 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214064311996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214064311997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214064311997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:43:15.191174 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19039): Terminating (SIGTERM) 06:43:15.231022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19042): Terminating (SIGTERM) 06:43:15.270729 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19045): Terminating (SIGTERM) 06:43:15.279784 --- ParallelTerminationStrategy: PID 19039 died... 06:43:15.333260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19039): Terminated: ok {rc=0} 06:43:15.342636 --- ParallelTerminationStrategy: PID 19042 died... 06:43:15.396051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19042): Terminated: ok {rc=0} 06:43:15.405840 --- ParallelTerminationStrategy: PID 19045 died... 06:43:15.459052 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19045): Terminated: ok {rc=0} 06:43:15.547376 bus /gobi_0: Setting Powered False 06:43:16.649403 bus /gobi_0: Setting Powered False 06:43:17.759230 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19043): Process ended prematurely: osmo-stp_10.42.42.5(pid=19043) [trial-2400↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19043)]