Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=12472): Process ended prematurely: osmo-stp_10.42.42.5(pid=12472) [trial-2400↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12472)]
Standard Output
---------------------------------------------- trial-2400 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 05:36:19.974793 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:19.985637 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 05:36:20.135728 tst cs_paging_gprs_active.py: using LAC 38765 05:36:20.258965 tst cs_paging_gprs_active.py: using RAC 5 05:36:20.380035 tst cs_paging_gprs_active.py: using CellId 38765 05:36:20.503313 tst cs_paging_gprs_active.py: using BVCI 38766 05:36:20.527467 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.538451 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.549134 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.559750 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.571003 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.582315 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.593414 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.604121 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:36:20.615197 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:36:20.737394 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:36:21.027361 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:36:21.159801 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:36:21.485706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12462): Launched 05:36:21.755807 run iperf3-srv_10.42.42.10(pid=12463): Launched 05:36:21.948483 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:36:22.079218 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:36:22.406792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12464): Launched 05:36:22.676526 run iperf3-srv_10.42.42.10(pid=12465): Launched 05:36:22.868045 tst cs_paging_gprs_active.py:38: start network... 05:36:22.998785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:36:23.492254 run create_hlr_db(pid=12466): Launched 05:36:23.673243 bus /gobi_6: Setting Powered False 05:36:24.694825 run create_hlr_db(pid=12466): Terminated: ok {rc=0} 05:36:25.142123 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12468): Launched 05:36:25.479324 run osmo-hlr_10.42.42.2(pid=12469): Launched 05:36:25.603144 run osmo-stp_10.42.42.5: Starting osmo-stp 05:36:26.187656 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12471): Launched 05:36:26.523991 run osmo-stp_10.42.42.5(pid=12472): Launched 05:36:26.646844 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:36:27.233251 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12474): Launched 05:36:27.353607 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:36:27.646616 run patchelf(pid=12475): Launched 05:36:27.842905 run osmo-stp_10.42.42.5(pid=12472): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12472)] 05:36:27.987193 run osmo-stp_10.42.42.5(pid=12472): stdout: | (launched: 2022-12-14_05:36:26.359194) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:36:28.131753 run osmo-stp_10.42.42.5(pid=12472): stderr: | �[0;m�[38;5;43m20221214053626553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214053626553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214053626553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214053626554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214053626554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214053626554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214053626554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:36:28.270343 run osmo-stp_10.42.42.5(pid=12472): stdout: | (launched: 2022-12-14_05:36:26.359194) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:36:28.407598 run osmo-stp_10.42.42.5(pid=12472): stderr: | �[0;m�[38;5;43m20221214053626553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214053626553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214053626553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214053626554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214053626554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214053626554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214053626554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:36:28.567935 run patchelf(pid=12475): Terminating (SIGINT) 05:36:28.756194 run patchelf(pid=12475): Terminated: ok {rc=0} 05:36:28.790457 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12472): Process ended prematurely: osmo-stp_10.42.42.5(pid=12472) [trial-2400↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12472)] [trial-2400↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 05:36:28.800444 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:36:28.863442 run osmo-hlr_10.42.42.2(pid=12469): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12469)] 05:36:28.914914 run osmo-hlr_10.42.42.2(pid=12469): stdout: | (launched: 2022-12-14_05:36:25.313846) 05:36:28.967164 run osmo-hlr_10.42.42.2(pid=12469): stderr: | �[0;m�[1;31m20221214053625512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214053625512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214053625512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214053625512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214053625512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214053625513 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214053625524 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214053625533 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214053625533 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214053625533 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:36:29.011631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12462): Terminating (SIGTERM) 05:36:29.053828 run iperf3-srv_10.42.42.10(pid=12463): Terminating (SIGTERM) 05:36:29.095761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12464): Terminating (SIGTERM) 05:36:29.137721 run iperf3-srv_10.42.42.10(pid=12465): Terminating (SIGTERM) 05:36:29.179691 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12468): Terminating (SIGTERM) 05:36:29.221540 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12471): Terminating (SIGTERM) 05:36:29.263327 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12474): Terminating (SIGTERM) 05:36:29.273039 --- ParallelTerminationStrategy: PID 12462 died... 05:36:29.328770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12462): Terminated: ok {rc=0} 05:36:29.338821 --- ParallelTerminationStrategy: PID 12463 died... 05:36:29.394289 run iperf3-srv_10.42.42.10(pid=12463): Terminated {rc=256} 05:36:29.404198 --- ParallelTerminationStrategy: PID 12464 died... 05:36:29.459759 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12464): Terminated: ok {rc=0} 05:36:29.469793 --- ParallelTerminationStrategy: PID 12465 died... 05:36:29.525013 run iperf3-srv_10.42.42.10(pid=12465): Terminated {rc=256} 05:36:29.535032 --- ParallelTerminationStrategy: PID 12468 died... 05:36:29.590691 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12468): Terminated: ok {rc=0} 05:36:29.600680 --- ParallelTerminationStrategy: PID 12471 died... 05:36:29.656075 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12471): Terminated: ok {rc=0} 05:36:29.666095 --- ParallelTerminationStrategy: PID 12474 died... 05:36:29.721531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12474): Terminated: ok {rc=0} 05:36:29.808647 bus /gobi_0: Setting Powered False 05:36:30.938397 bus /gobi_0: Setting Powered False 05:36:32.054426 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12472): Process ended prematurely: osmo-stp_10.42.42.5(pid=12472) [trial-2400↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12472)]