Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14373): Process ended prematurely: osmo-stp_10.42.42.5(pid=14373) [trial-2400↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14373)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 05:52:01.375460 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:01.391947 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 05:52:01.553552 tst cs_paging_gprs_active.py: using LAC 38848 05:52:01.683696 tst cs_paging_gprs_active.py: using RAC 88 05:52:01.839034 tst cs_paging_gprs_active.py: using CellId 38848 05:52:01.998812 tst cs_paging_gprs_active.py: using BVCI 38849 05:52:02.031786 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.046350 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.060830 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.075753 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.091149 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.104866 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.118149 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.131773 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:52:02.146476 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:52:02.272681 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:52:02.577288 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:52:02.718065 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:52:03.065069 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14363): Launched 05:52:03.353455 run iperf3-srv_10.42.42.10(pid=14364): Launched 05:52:03.560565 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:52:03.700792 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:52:04.048413 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14365): Launched 05:52:04.337016 run iperf3-srv_10.42.42.10(pid=14366): Launched 05:52:04.543473 tst cs_paging_gprs_active.py:38: start network... 05:52:04.683606 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:52:05.219348 run create_hlr_db(pid=14367): Launched 05:52:05.413663 bus /gobi_6: Setting Powered False 05:52:06.433545 run create_hlr_db(pid=14367): Terminated: ok {rc=0} 05:52:06.856171 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14369): Launched 05:52:07.171220 run osmo-hlr_10.42.42.2(pid=14370): Launched 05:52:07.294294 run osmo-stp_10.42.42.5: Starting osmo-stp 05:52:07.847437 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14372): Launched 05:52:08.162052 run osmo-stp_10.42.42.5(pid=14373): Launched 05:52:08.277295 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:52:08.825257 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14375): Launched 05:52:08.937871 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:52:09.211568 run patchelf(pid=14376): Launched 05:52:09.396445 run osmo-stp_10.42.42.5(pid=14373): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14373)] 05:52:09.531714 run osmo-stp_10.42.42.5(pid=14373): stdout: | (launched: 2022-12-14_05:52:08.007307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:52:09.667038 run osmo-stp_10.42.42.5(pid=14373): stderr: | �[0;m�[38;5;43m20221214055208177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055208177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055208178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055208178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055208179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055208179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055208179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:52:09.797313 run osmo-stp_10.42.42.5(pid=14373): stdout: | (launched: 2022-12-14_05:52:08.007307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:52:09.926389 run osmo-stp_10.42.42.5(pid=14373): stderr: | �[0;m�[38;5;43m20221214055208177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055208177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055208178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055208178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055208179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055208179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055208179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:52:10.077258 run patchelf(pid=14376): Terminating (SIGINT) 05:52:10.254425 run patchelf(pid=14376): Terminated: ok {rc=0} 05:52:10.286927 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14373): Process ended prematurely: osmo-stp_10.42.42.5(pid=14373) [trial-2400↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14373)] [trial-2400↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 05:52:10.296369 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 05:52:10.357039 run osmo-hlr_10.42.42.2(pid=14370): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14370)] 05:52:10.406400 run osmo-hlr_10.42.42.2(pid=14370): stdout: | (launched: 2022-12-14_05:52:07.016338) 05:52:10.456293 run osmo-hlr_10.42.42.2(pid=14370): stderr: | �[0;m�[1;31m20221214055207194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214055207194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214055207195 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214055207195 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214055207195 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214055207195 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214055207210 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214055207218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214055207219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214055207219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:52:10.499205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14363): Terminating (SIGTERM) 05:52:10.539832 run iperf3-srv_10.42.42.10(pid=14364): Terminating (SIGTERM) 05:52:10.580202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14365): Terminating (SIGTERM) 05:52:10.620230 run iperf3-srv_10.42.42.10(pid=14366): Terminating (SIGTERM) 05:52:10.660357 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14369): Terminating (SIGTERM) 05:52:10.700506 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14372): Terminating (SIGTERM) 05:52:10.740522 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14375): Terminating (SIGTERM) 05:52:10.749827 --- ParallelTerminationStrategy: PID 14363 died... 05:52:10.804005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14363): Terminated: ok {rc=0} 05:52:10.813691 --- ParallelTerminationStrategy: PID 14364 died... 05:52:10.867315 run iperf3-srv_10.42.42.10(pid=14364): Terminated {rc=256} 05:52:10.876798 --- ParallelTerminationStrategy: PID 14365 died... 05:52:10.930602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14365): Terminated: ok {rc=0} 05:52:10.940146 --- ParallelTerminationStrategy: PID 14366 died... 05:52:10.993721 run iperf3-srv_10.42.42.10(pid=14366): Terminated {rc=256} 05:52:11.003579 --- ParallelTerminationStrategy: PID 14369 died... 05:52:11.057387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14369): Terminated: ok {rc=0} 05:52:11.067104 --- ParallelTerminationStrategy: PID 14372 died... 05:52:11.120821 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14372): Terminated: ok {rc=0} 05:52:11.130332 --- ParallelTerminationStrategy: PID 14375 died... 05:52:11.183992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14375): Terminated: ok {rc=0} 05:52:11.267698 bus /gobi_0: Setting Powered False 05:52:12.369605 bus /gobi_0: Setting Powered False 05:52:13.480237 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14373): Process ended prematurely: osmo-stp_10.42.42.5(pid=14373) [trial-2400↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14373)]