Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17767): Process ended prematurely: osmo-stp_10.42.42.5(pid=17767) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17767)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 06:28:32.330746 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.342687 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:28:32.507438 tst cs_paging_gprs_active.py: using LAC 39038 06:28:32.637580 tst cs_paging_gprs_active.py: using RAC 23 06:28:32.770342 tst cs_paging_gprs_active.py: using CellId 39038 06:28:32.901420 tst cs_paging_gprs_active.py: using BVCI 39039 06:28:32.927092 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.938796 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.950211 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.961598 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.973296 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.985160 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:32.997759 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:33.009144 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:28:33.020686 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:28:33.139006 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:28:33.441196 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:28:33.580556 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:28:33.924777 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17757): Launched 06:28:34.211922 run iperf3-srv_10.42.42.10(pid=17758): Launched 06:28:34.416534 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:28:34.555767 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:28:34.901455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17759): Launched 06:28:35.188541 run iperf3-srv_10.42.42.10(pid=17760): Launched 06:28:35.393294 tst cs_paging_gprs_active.py:38: start network... 06:28:35.532581 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:28:36.064719 run create_hlr_db(pid=17761): Launched 06:28:36.257211 bus /gobi_6: Setting Powered False 06:28:37.277693 run create_hlr_db(pid=17761): Terminated: ok {rc=0} 06:28:37.720898 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17763): Launched 06:28:38.055210 run osmo-hlr_10.42.42.2(pid=17764): Launched 06:28:38.177311 run osmo-stp_10.42.42.5: Starting osmo-stp 06:28:38.757096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17766): Launched 06:28:39.090048 run osmo-stp_10.42.42.5(pid=17767): Launched 06:28:39.211047 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:28:39.793051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17769): Launched 06:28:39.912100 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:28:40.210067 run patchelf(pid=17770): Launched 06:28:40.404085 run osmo-stp_10.42.42.5(pid=17767): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17767)] 06:28:40.546385 run osmo-stp_10.42.42.5(pid=17767): stdout: | (launched: 2022-12-14_06:28:38.926984) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:28:40.689682 run osmo-stp_10.42.42.5(pid=17767): stderr: | �[0;m�[38;5;43m20221214062839119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062839119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062839119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062839120 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062839120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062839120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062839120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:28:40.827433 run osmo-stp_10.42.42.5(pid=17767): stdout: | (launched: 2022-12-14_06:28:38.926984) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:28:40.963378 run osmo-stp_10.42.42.5(pid=17767): stderr: | �[0;m�[38;5;43m20221214062839119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062839119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062839119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062839120 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062839120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062839120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062839120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:28:41.122437 run patchelf(pid=17770): Terminating (SIGINT) 06:28:41.309181 run patchelf(pid=17770): Terminated: ok {rc=0} 06:28:41.343547 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17767): Process ended prematurely: osmo-stp_10.42.42.5(pid=17767) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17767)] [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 06:28:41.353788 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 06:28:41.416895 run osmo-hlr_10.42.42.2(pid=17764): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17764)] 06:28:41.468252 run osmo-hlr_10.42.42.2(pid=17764): stdout: | (launched: 2022-12-14_06:28:37.891180) 06:28:41.520413 run osmo-hlr_10.42.42.2(pid=17764): stderr: | �[0;m�[1;31m20221214062838088 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214062838088 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214062838088 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214062838088 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214062838089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214062838089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214062838101 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214062838109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214062838109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214062838109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:28:41.564919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17757): Terminating (SIGTERM) 06:28:41.607055 run iperf3-srv_10.42.42.10(pid=17758): Terminating (SIGTERM) 06:28:41.649240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17759): Terminating (SIGTERM) 06:28:41.691078 run iperf3-srv_10.42.42.10(pid=17760): Terminating (SIGTERM) 06:28:41.732935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17763): Terminating (SIGTERM) 06:28:41.775048 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17766): Terminating (SIGTERM) 06:28:41.817550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17769): Terminating (SIGTERM) 06:28:41.827228 --- ParallelTerminationStrategy: PID 17757 died... 06:28:41.883427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17757): Terminated: ok {rc=0} 06:28:41.893940 --- ParallelTerminationStrategy: PID 17758 died... 06:28:41.949408 run iperf3-srv_10.42.42.10(pid=17758): Terminated {rc=256} 06:28:41.959389 --- ParallelTerminationStrategy: PID 17759 died... 06:28:42.015043 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17759): Terminated: ok {rc=0} 06:28:42.025244 --- ParallelTerminationStrategy: PID 17760 died... 06:28:42.080832 run iperf3-srv_10.42.42.10(pid=17760): Terminated {rc=256} 06:28:42.091006 --- ParallelTerminationStrategy: PID 17763 died... 06:28:42.146799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17763): Terminated: ok {rc=0} 06:28:42.156910 --- ParallelTerminationStrategy: PID 17766 died... 06:28:42.212688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17766): Terminated: ok {rc=0} 06:28:42.222765 --- ParallelTerminationStrategy: PID 17769 died... 06:28:42.278550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17769): Terminated: ok {rc=0} 06:28:42.365306 bus /gobi_0: Setting Powered False 06:28:43.472266 bus /gobi_0: Setting Powered False 06:28:44.583728 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17767): Process ended prematurely: osmo-stp_10.42.42.5(pid=17767) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17767)]