Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24308): Process ended prematurely: osmo-stp_10.42.42.5(pid=24308) [trial-2401↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:46:49.093997 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.105561 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:46:49.254313 tst cs_paging_gprs_active.py: using LAC 39447 07:46:49.378915 tst cs_paging_gprs_active.py: using RAC 177 07:46:49.501460 tst cs_paging_gprs_active.py: using CellId 39447 07:46:49.621567 tst cs_paging_gprs_active.py: using BVCI 39448 07:46:49.645050 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.655821 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.666578 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.677261 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.687780 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.698322 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.709126 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.719567 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:46:49.730340 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:46:49.846413 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:46:50.147008 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:46:50.284854 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:46:50.628403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24297): Launched 07:46:50.913155 run iperf3-srv_10.42.42.10(pid=24298): Launched 07:46:51.114914 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:46:51.251844 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:46:51.593770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24299): Launched 07:46:51.878611 run iperf3-srv_10.42.42.10(pid=24300): Launched 07:46:52.082383 tst cs_paging_gprs_active.py:38: start network... 07:46:52.219468 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:46:52.737013 run create_hlr_db(pid=24302): Launched 07:46:52.927890 bus /gobi_6: Setting Powered False 07:46:53.947135 run create_hlr_db(pid=24302): Terminated: ok {rc=0} 07:46:54.359200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24304): Launched 07:46:54.667697 run osmo-hlr_10.42.42.2(pid=24305): Launched 07:46:54.780889 run osmo-stp_10.42.42.5: Starting osmo-stp 07:46:55.312101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24307): Launched 07:46:55.619726 run osmo-stp_10.42.42.5(pid=24308): Launched 07:46:55.731720 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:46:56.267360 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24310): Launched 07:46:56.376139 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:46:56.645697 run patchelf(pid=24311): Launched 07:46:56.828258 run osmo-stp_10.42.42.5(pid=24308): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)] 07:46:56.959876 run osmo-stp_10.42.42.5(pid=24308): stdout: | (launched: 2022-12-14_07:46:55.468171) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:46:57.091545 run osmo-stp_10.42.42.5(pid=24308): stderr: | �[0;m�[38;5;43m20221214074655638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074655638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074655638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074655639 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074655639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074655640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074655640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:46:57.219100 run osmo-stp_10.42.42.5(pid=24308): stdout: | (launched: 2022-12-14_07:46:55.468171) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:46:57.345537 run osmo-stp_10.42.42.5(pid=24308): stderr: | �[0;m�[38;5;43m20221214074655638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074655638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074655638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074655639 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074655639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074655640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074655640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:46:57.494105 run patchelf(pid=24311): Terminating (SIGINT) 07:46:57.668694 run patchelf(pid=24311): Terminated: ok {rc=0} 07:46:57.700527 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24308): Process ended prematurely: osmo-stp_10.42.42.5(pid=24308) [trial-2401↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)] [trial-2401↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:46:57.709801 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 07:46:57.769680 run osmo-hlr_10.42.42.2(pid=24305): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24305)] 07:46:57.818174 run osmo-hlr_10.42.42.2(pid=24305): stdout: | (launched: 2022-12-14_07:46:54.514731) 07:46:57.867515 run osmo-hlr_10.42.42.2(pid=24305): stderr: | �[0;m�[1;31m20221214074654688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214074654688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214074654688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214074654688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214074654688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214074654688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214074654700 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214074654710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214074654710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214074654710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:46:57.909946 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24297): Terminating (SIGTERM) 07:46:57.949595 run iperf3-srv_10.42.42.10(pid=24298): Terminating (SIGTERM) 07:46:57.989409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24299): Terminating (SIGTERM) 07:46:58.029352 run iperf3-srv_10.42.42.10(pid=24300): Terminating (SIGTERM) 07:46:58.069686 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24304): Terminating (SIGTERM) 07:46:58.109471 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24307): Terminating (SIGTERM) 07:46:58.149195 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24310): Terminating (SIGTERM) 07:46:58.158448 --- ParallelTerminationStrategy: PID 24297 died... 07:46:58.211858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24297): Terminated: ok {rc=0} 07:46:58.221690 --- ParallelTerminationStrategy: PID 24298 died... 07:46:58.274255 run iperf3-srv_10.42.42.10(pid=24298): Terminated {rc=256} 07:46:58.283806 --- ParallelTerminationStrategy: PID 24299 died... 07:46:58.336717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24299): Terminated: ok {rc=0} 07:46:58.346421 --- ParallelTerminationStrategy: PID 24300 died... 07:46:58.399079 run iperf3-srv_10.42.42.10(pid=24300): Terminated {rc=256} 07:46:58.408637 --- ParallelTerminationStrategy: PID 24304 died... 07:46:58.461255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24304): Terminated: ok {rc=0} 07:46:58.471066 --- ParallelTerminationStrategy: PID 24307 died... 07:46:58.523898 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24307): Terminated: ok {rc=0} 07:46:58.533910 --- ParallelTerminationStrategy: PID 24310 died... 07:46:58.586852 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24310): Terminated: ok {rc=0} 07:46:58.670489 bus /gobi_0: Setting Powered False 07:46:59.777477 bus /gobi_0: Setting Powered False 07:47:00.891308 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24308): Process ended prematurely: osmo-stp_10.42.42.5(pid=24308) [trial-2401↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)]