Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=1908): Process ended prematurely: osmo-stp_10.42.42.5(pid=1908) [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1908)]
Standard Output
---------------------------------------------- trial-2402 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 09:37:49.421838 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:49.432921 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:37:49.567032 tst cs_paging_gprs_active.py: using LAC 40031 09:37:49.683926 tst cs_paging_gprs_active.py: using RAC 251 09:37:49.805986 tst cs_paging_gprs_active.py: using CellId 40031 09:37:49.921142 tst cs_paging_gprs_active.py: using BVCI 40032 09:37:49.943919 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:49.955193 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:49.966396 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:49.977513 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:49.988911 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:50.000372 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:50.012000 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:50.023527 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:37:50.035304 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:37:50.155052 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:37:50.431473 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:37:50.556480 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:37:50.866470 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1898): Launched 09:37:51.124037 run iperf3-srv_10.42.42.10(pid=1899): Launched 09:37:51.305652 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:37:51.429766 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:37:51.738670 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1900): Launched 09:37:52.022893 run iperf3-srv_10.42.42.10(pid=1901): Launched 09:37:52.204789 tst cs_paging_gprs_active.py:38: start network... 09:37:52.329115 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:37:52.803364 run create_hlr_db(pid=1902): Launched 09:37:52.975951 bus /gobi_6: Setting Powered False 09:37:53.998001 run create_hlr_db(pid=1902): Terminated: ok {rc=0} 09:37:54.422262 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1904): Launched 09:37:54.741516 run osmo-hlr_10.42.42.2(pid=1905): Launched 09:37:54.858737 run osmo-stp_10.42.42.5: Starting osmo-stp 09:37:55.412836 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1907): Launched 09:37:55.734075 run osmo-stp_10.42.42.5(pid=1908): Launched 09:37:55.848929 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:37:56.405709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1910): Launched 09:37:56.519255 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:37:56.797490 run patchelf(pid=1911): Launched 09:37:56.983347 run osmo-stp_10.42.42.5(pid=1908): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1908)] 09:37:57.119333 run osmo-stp_10.42.42.5(pid=1908): stdout: | (launched: 2022-12-14_09:37:55.576548) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:37:57.256358 run osmo-stp_10.42.42.5(pid=1908): stderr: | �[0;m�[38;5;43m20221214093755764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093755764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093755764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093755765 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093755765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093755765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093755766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:37:57.387976 run osmo-stp_10.42.42.5(pid=1908): stdout: | (launched: 2022-12-14_09:37:55.576548) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:37:57.518836 run osmo-stp_10.42.42.5(pid=1908): stderr: | �[0;m�[38;5;43m20221214093755764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093755764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093755764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093755765 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093755765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093755765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093755766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:37:57.670562 run patchelf(pid=1911): Terminating (SIGINT) 09:37:57.848603 run patchelf(pid=1911): Terminated: ok {rc=0} 09:37:57.881436 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1908): Process ended prematurely: osmo-stp_10.42.42.5(pid=1908) [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1908)] [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 09:37:57.891253 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 09:37:57.953276 run osmo-hlr_10.42.42.2(pid=1905): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1905)] 09:37:58.004182 run osmo-hlr_10.42.42.2(pid=1905): stdout: | (launched: 2022-12-14_09:37:54.584397) 09:37:58.056155 run osmo-hlr_10.42.42.2(pid=1905): stderr: | �[0;m�[1;31m20221214093754777 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214093754777 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214093754777 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214093754777 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214093754777 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214093754777 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214093754789 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214093754798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214093754798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214093754798 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:37:58.099904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1898): Terminating (SIGTERM) 09:37:58.141285 run iperf3-srv_10.42.42.10(pid=1899): Terminating (SIGTERM) 09:37:58.182597 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1900): Terminating (SIGTERM) 09:37:58.224045 run iperf3-srv_10.42.42.10(pid=1901): Terminating (SIGTERM) 09:37:58.265683 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1904): Terminating (SIGTERM) 09:37:58.306978 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1907): Terminating (SIGTERM) 09:37:58.348072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1910): Terminating (SIGTERM) 09:37:58.357526 --- ParallelTerminationStrategy: PID 1898 died... 09:37:58.412552 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1898): Terminated: ok {rc=0} 09:37:58.422409 --- ParallelTerminationStrategy: PID 1899 died... 09:37:58.477060 run iperf3-srv_10.42.42.10(pid=1899): Terminated {rc=256} 09:37:58.486883 --- ParallelTerminationStrategy: PID 1900 died... 09:37:58.542183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1900): Terminated: ok {rc=0} 09:37:58.551984 --- ParallelTerminationStrategy: PID 1901 died... 09:37:58.606479 run iperf3-srv_10.42.42.10(pid=1901): Terminated {rc=256} 09:37:58.616344 --- ParallelTerminationStrategy: PID 1904 died... 09:37:58.671086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1904): Terminated: ok {rc=0} 09:37:58.680900 --- ParallelTerminationStrategy: PID 1907 died... 09:37:58.735545 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1907): Terminated: ok {rc=0} 09:37:58.745400 --- ParallelTerminationStrategy: PID 1910 died... 09:37:58.800471 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1910): Terminated: ok {rc=0} 09:37:58.885836 bus /gobi_0: Setting Powered False 09:37:59.991504 bus /gobi_0: Setting Powered False 09:38:01.123370 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1908): Process ended prematurely: osmo-stp_10.42.42.5(pid=1908) [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1908)]