Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7397): Process ended prematurely: osmo-stp_10.42.42.5(pid=7397) [trial-2403↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7397)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:18:04.786031 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:04.797411 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:18:04.963772 tst cs_paging_gprs_active.py: using LAC 40241 10:18:05.091630 tst cs_paging_gprs_active.py: using RAC 206 10:18:05.221391 tst cs_paging_gprs_active.py: using CellId 40241 10:18:05.341425 tst cs_paging_gprs_active.py: using BVCI 40242 10:18:05.364795 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.375768 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.386723 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.397637 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.408456 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.419504 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.430632 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.441755 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:18:05.452727 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:18:05.572000 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:18:05.870202 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:18:06.008168 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:18:06.348404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7387): Launched 10:18:06.633358 run iperf3-srv_10.42.42.10(pid=7388): Launched 10:18:06.834422 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:18:06.972542 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:18:07.315628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7389): Launched 10:18:07.601341 run iperf3-srv_10.42.42.10(pid=7390): Launched 10:18:07.802025 tst cs_paging_gprs_active.py:38: start network... 10:18:07.938665 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:18:08.466221 run create_hlr_db(pid=7391): Launched 10:18:08.656203 bus /gobi_6: Setting Powered False 10:18:09.676849 run create_hlr_db(pid=7391): Terminated: ok {rc=0} 10:18:10.090736 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7393): Launched 10:18:10.398885 run osmo-hlr_10.42.42.2(pid=7394): Launched 10:18:10.517532 run osmo-stp_10.42.42.5: Starting osmo-stp 10:18:11.057237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7396): Launched 10:18:11.365014 run osmo-stp_10.42.42.5(pid=7397): Launched 10:18:11.476639 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:18:12.013991 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7399): Launched 10:18:12.124116 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:18:12.394782 run patchelf(pid=7400): Launched 10:18:12.576100 run osmo-stp_10.42.42.5(pid=7397): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7397)] 10:18:12.708450 run osmo-stp_10.42.42.5(pid=7397): stdout: | (launched: 2022-12-14_10:18:11.213236) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:18:12.840524 run osmo-stp_10.42.42.5(pid=7397): stderr: | �[0;m�[38;5;43m20221214101811382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101811382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101811382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101811382 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101811383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101811383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101811383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:18:12.968234 run osmo-stp_10.42.42.5(pid=7397): stdout: | (launched: 2022-12-14_10:18:11.213236) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:18:13.095292 run osmo-stp_10.42.42.5(pid=7397): stderr: | �[0;m�[38;5;43m20221214101811382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101811382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101811382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101811382 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101811383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101811383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101811383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:18:13.243304 run patchelf(pid=7400): Terminating (SIGINT) 10:18:13.417315 run patchelf(pid=7400): Terminated: ok {rc=0} 10:18:13.449135 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7397): Process ended prematurely: osmo-stp_10.42.42.5(pid=7397) [trial-2403↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7397)] [trial-2403↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:18:13.458617 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:18:13.519355 run osmo-hlr_10.42.42.2(pid=7394): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7394)] 10:18:13.568646 run osmo-hlr_10.42.42.2(pid=7394): stdout: | (launched: 2022-12-14_10:18:10.246514) 10:18:13.618639 run osmo-hlr_10.42.42.2(pid=7394): stderr: | �[0;m�[1;31m20221214101810422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101810422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101810422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101810422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101810422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101810422 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101810434 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101810442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101810442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101810442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:18:13.661376 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7387): Terminating (SIGTERM) 10:18:13.701320 run iperf3-srv_10.42.42.10(pid=7388): Terminating (SIGTERM) 10:18:13.741365 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7389): Terminating (SIGTERM) 10:18:13.781298 run iperf3-srv_10.42.42.10(pid=7390): Terminating (SIGTERM) 10:18:13.821631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7393): Terminating (SIGTERM) 10:18:13.861343 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7396): Terminating (SIGTERM) 10:18:13.901653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7399): Terminating (SIGTERM) 10:18:13.910751 --- ParallelTerminationStrategy: PID 7387 died... 10:18:13.964433 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7387): Terminated: ok {rc=0} 10:18:13.974103 --- ParallelTerminationStrategy: PID 7388 died... 10:18:14.027509 run iperf3-srv_10.42.42.10(pid=7388): Terminated {rc=256} 10:18:14.037045 --- ParallelTerminationStrategy: PID 7389 died... 10:18:14.090667 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7389): Terminated: ok {rc=0} 10:18:14.100087 --- ParallelTerminationStrategy: PID 7390 died... 10:18:14.153251 run iperf3-srv_10.42.42.10(pid=7390): Terminated {rc=256} 10:18:14.162616 --- ParallelTerminationStrategy: PID 7393 died... 10:18:14.216170 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7393): Terminated: ok {rc=0} 10:18:14.225737 --- ParallelTerminationStrategy: PID 7396 died... 10:18:14.279143 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7396): Terminated: ok {rc=0} 10:18:14.288656 --- ParallelTerminationStrategy: PID 7399 died... 10:18:14.341902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7399): Terminated: ok {rc=0} 10:18:14.430590 bus /gobi_0: Setting Powered False 10:18:15.534311 bus /gobi_0: Setting Powered False 10:18:16.672579 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7397): Process ended prematurely: osmo-stp_10.42.42.5(pid=7397) [trial-2403↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7397)]