Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7257): Process ended prematurely: osmo-stp_10.42.42.5(pid=7257) [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7257)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:16:04.290365 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.301673 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:16:04.442234 tst cs_paging_gprs_active.py: using LAC 40231 10:16:04.561252 tst cs_paging_gprs_active.py: using RAC 196 10:16:04.681273 tst cs_paging_gprs_active.py: using CellId 40231 10:16:04.801983 tst cs_paging_gprs_active.py: using BVCI 40232 10:16:04.825574 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.836354 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.847057 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.857684 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.868473 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.879553 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.890671 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.901485 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:04.912470 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:16:05.036067 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:16:05.321983 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:16:05.450404 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:16:05.770774 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7247): Launched 10:16:06.038565 run iperf3-srv_10.42.42.10(pid=7248): Launched 10:16:06.225162 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:16:06.352697 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:16:06.671760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7249): Launched 10:16:06.937344 run iperf3-srv_10.42.42.10(pid=7250): Launched 10:16:07.124258 tst cs_paging_gprs_active.py:38: start network... 10:16:07.251202 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:16:07.734862 run create_hlr_db(pid=7251): Launched 10:16:07.911926 bus /gobi_6: Setting Powered False 10:16:08.933295 run create_hlr_db(pid=7251): Terminated: ok {rc=0} 10:16:09.372611 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7253): Launched 10:16:09.702331 run osmo-hlr_10.42.42.2(pid=7254): Launched 10:16:09.822280 run osmo-stp_10.42.42.5: Starting osmo-stp 10:16:10.390264 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7256): Launched 10:16:10.719213 run osmo-stp_10.42.42.5(pid=7257): Launched 10:16:10.837319 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:16:11.409950 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7259): Launched 10:16:11.526444 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:16:11.814822 run patchelf(pid=7260): Launched 10:16:12.007311 run osmo-stp_10.42.42.5(pid=7257): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7257)] 10:16:12.147411 run osmo-stp_10.42.42.5(pid=7257): stdout: | (launched: 2022-12-14_10:16:10.556826) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:16:12.287781 run osmo-stp_10.42.42.5(pid=7257): stderr: | �[0;m�[38;5;43m20221214101610749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101610749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101610750 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101610750 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101610750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101610750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101610751 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:16:12.423499 run osmo-stp_10.42.42.5(pid=7257): stdout: | (launched: 2022-12-14_10:16:10.556826) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:16:12.557392 run osmo-stp_10.42.42.5(pid=7257): stderr: | �[0;m�[38;5;43m20221214101610749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101610749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101610750 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101610750 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101610750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101610750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101610751 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:16:12.714161 run patchelf(pid=7260): Terminating (SIGINT) 10:16:12.897452 run patchelf(pid=7260): Terminated: ok {rc=0} 10:16:12.931341 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7257): Process ended prematurely: osmo-stp_10.42.42.5(pid=7257) [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7257)] [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:16:12.941333 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:16:13.004633 run osmo-hlr_10.42.42.2(pid=7254): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7254)] 10:16:13.056229 run osmo-hlr_10.42.42.2(pid=7254): stdout: | (launched: 2022-12-14_10:16:09.539374) 10:16:13.109046 run osmo-hlr_10.42.42.2(pid=7254): stderr: | �[0;m�[1;31m20221214101609737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101609737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101609737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101609737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101609737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101609737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101609749 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101609758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101609758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101609758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:16:13.153934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7247): Terminating (SIGTERM) 10:16:13.196377 run iperf3-srv_10.42.42.10(pid=7248): Terminating (SIGTERM) 10:16:13.238315 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7249): Terminating (SIGTERM) 10:16:13.280520 run iperf3-srv_10.42.42.10(pid=7250): Terminating (SIGTERM) 10:16:13.322860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7253): Terminating (SIGTERM) 10:16:13.365174 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7256): Terminating (SIGTERM) 10:16:13.407108 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7259): Terminating (SIGTERM) 10:16:13.416766 --- ParallelTerminationStrategy: PID 7247 died... 10:16:13.472881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7247): Terminated: ok {rc=0} 10:16:13.482979 --- ParallelTerminationStrategy: PID 7248 died... 10:16:13.538468 run iperf3-srv_10.42.42.10(pid=7248): Terminated {rc=256} 10:16:13.548432 --- ParallelTerminationStrategy: PID 7249 died... 10:16:13.604063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7249): Terminated: ok {rc=0} 10:16:13.614041 --- ParallelTerminationStrategy: PID 7250 died... 10:16:13.669552 run iperf3-srv_10.42.42.10(pid=7250): Terminated {rc=256} 10:16:13.679528 --- ParallelTerminationStrategy: PID 7253 died... 10:16:13.735302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7253): Terminated: ok {rc=0} 10:16:13.745478 --- ParallelTerminationStrategy: PID 7256 died... 10:16:13.801079 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7256): Terminated: ok {rc=0} 10:16:13.811077 --- ParallelTerminationStrategy: PID 7259 died... 10:16:13.866746 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7259): Terminated: ok {rc=0} 10:16:13.953724 bus /gobi_0: Setting Powered False 10:16:15.060939 bus /gobi_0: Setting Powered False 10:16:16.173435 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7257): Process ended prematurely: osmo-stp_10.42.42.5(pid=7257) [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7257)]