Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9619): Process ended prematurely: osmo-stp_10.42.42.5(pid=9619) [trial-2403↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9619)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:42:07.647304 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:07.658130 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:42:07.807531 tst cs_paging_gprs_active.py: using LAC 40369 10:42:07.933360 tst cs_paging_gprs_active.py: using RAC 79 10:42:08.062413 tst cs_paging_gprs_active.py: using CellId 40369 10:42:08.183739 tst cs_paging_gprs_active.py: using BVCI 40370 10:42:08.207187 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.218462 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.229340 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.240080 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.251131 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.262087 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.273193 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.283941 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:42:08.295053 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:42:08.418578 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:42:08.700245 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:42:08.827290 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:42:09.145244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9609): Launched 10:42:09.409321 run iperf3-srv_10.42.42.10(pid=9610): Launched 10:42:09.595387 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:42:09.722017 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:42:10.040285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9611): Launched 10:42:10.303416 run iperf3-srv_10.42.42.10(pid=9612): Launched 10:42:10.488846 tst cs_paging_gprs_active.py:38: start network... 10:42:10.615517 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:42:11.093835 run create_hlr_db(pid=9613): Launched 10:42:11.268876 bus /gobi_6: Setting Powered False 10:42:12.290656 run create_hlr_db(pid=9613): Terminated: ok {rc=0} 10:42:12.697763 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9615): Launched 10:42:13.002413 run osmo-hlr_10.42.42.2(pid=9616): Launched 10:42:13.121340 run osmo-stp_10.42.42.5: Starting osmo-stp 10:42:13.658122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9618): Launched 10:42:13.961847 run osmo-stp_10.42.42.5(pid=9619): Launched 10:42:14.072795 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:42:14.602943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9621): Launched 10:42:14.711648 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:42:14.978079 run patchelf(pid=9622): Launched 10:42:15.159286 run osmo-stp_10.42.42.5(pid=9619): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9619)] 10:42:15.289951 run osmo-stp_10.42.42.5(pid=9619): stdout: | (launched: 2022-12-14_10:42:13.811965) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:42:15.420227 run osmo-stp_10.42.42.5(pid=9619): stderr: | �[0;m�[38;5;43m20221214104213980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214104213980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214104213980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214104213981 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214104213981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214104213981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214104213981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:42:15.546604 run osmo-stp_10.42.42.5(pid=9619): stdout: | (launched: 2022-12-14_10:42:13.811965) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:42:15.671150 run osmo-stp_10.42.42.5(pid=9619): stderr: | �[0;m�[38;5;43m20221214104213980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214104213980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214104213980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214104213981 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214104213981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214104213981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214104213981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:42:15.817317 run patchelf(pid=9622): Terminating (SIGINT) 10:42:15.999852 run patchelf(pid=9622): Terminated: ok {rc=0} 10:42:16.033738 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9619): Process ended prematurely: osmo-stp_10.42.42.5(pid=9619) [trial-2403↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9619)] [trial-2403↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:42:16.044304 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 10:42:16.108280 run osmo-hlr_10.42.42.2(pid=9616): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9616)] 10:42:16.159896 run osmo-hlr_10.42.42.2(pid=9616): stdout: | (launched: 2022-12-14_10:42:12.851922) 10:42:16.211886 run osmo-hlr_10.42.42.2(pid=9616): stderr: | �[0;m�[1;31m20221214104213024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214104213024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214104213024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214104213024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214104213024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214104213024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214104213036 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214104213045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214104213045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214104213045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:42:16.256447 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9609): Terminating (SIGTERM) 10:42:16.299087 run iperf3-srv_10.42.42.10(pid=9610): Terminating (SIGTERM) 10:42:16.344142 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9611): Terminating (SIGTERM) 10:42:16.385707 run iperf3-srv_10.42.42.10(pid=9612): Terminating (SIGTERM) 10:42:16.427159 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9615): Terminating (SIGTERM) 10:42:16.468210 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9618): Terminating (SIGTERM) 10:42:16.509329 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9621): Terminating (SIGTERM) 10:42:16.519094 --- ParallelTerminationStrategy: PID 9609 died... 10:42:16.575113 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9609): Terminated: ok {rc=0} 10:42:16.585555 --- ParallelTerminationStrategy: PID 9610 died... 10:42:16.641196 run iperf3-srv_10.42.42.10(pid=9610): Terminated {rc=256} 10:42:16.651536 --- ParallelTerminationStrategy: PID 9611 died... 10:42:16.707207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9611): Terminated: ok {rc=0} 10:42:16.717679 --- ParallelTerminationStrategy: PID 9612 died... 10:42:16.773267 run iperf3-srv_10.42.42.10(pid=9612): Terminated {rc=256} 10:42:16.783594 --- ParallelTerminationStrategy: PID 9615 died... 10:42:16.839687 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9615): Terminated: ok {rc=0} 10:42:16.850193 --- ParallelTerminationStrategy: PID 9618 died... 10:42:16.905947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9618): Terminated: ok {rc=0} 10:42:16.916374 --- ParallelTerminationStrategy: PID 9621 died... 10:42:16.972029 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9621): Terminated: ok {rc=0} 10:42:17.058278 bus /gobi_0: Setting Powered False 10:42:18.164656 bus /gobi_0: Setting Powered False 10:42:19.272752 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9619): Process ended prematurely: osmo-stp_10.42.42.5(pid=9619) [trial-2403↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9619)]