Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=17497): Process ended prematurely: osmo-stp_10.42.42.5(pid=17497) [trial-2404↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17497)]
Standard Output
---------------------------------------------- trial-2404 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:41:34.248137 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.259489 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:41:34.410824 tst cs_paging_gprs_active.py: using LAC 40651 11:41:34.538864 tst cs_paging_gprs_active.py: using RAC 106 11:41:34.665188 tst cs_paging_gprs_active.py: using CellId 40651 11:41:34.794146 tst cs_paging_gprs_active.py: using BVCI 40652 11:41:34.819369 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.830749 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.842214 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.853369 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.864358 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.875532 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.886900 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.897968 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:41:34.909227 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:41:35.028037 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:41:35.326831 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:41:35.464509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:41:35.808830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17487): Launched 11:41:36.095128 run iperf3-srv_10.42.42.10(pid=17488): Launched 11:41:36.297184 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:41:36.434701 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:41:36.777871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17489): Launched 11:41:37.063975 run iperf3-srv_10.42.42.10(pid=17490): Launched 11:41:37.266353 tst cs_paging_gprs_active.py:38: start network... 11:41:37.404405 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:41:37.934566 run create_hlr_db(pid=17491): Launched 11:41:38.125324 bus /gobi_6: Setting Powered False 11:41:39.146909 run create_hlr_db(pid=17491): Terminated: ok {rc=0} 11:41:39.562540 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17493): Launched 11:41:39.871022 run osmo-hlr_10.42.42.2(pid=17494): Launched 11:41:39.985810 run osmo-stp_10.42.42.5: Starting osmo-stp 11:41:40.519587 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17496): Launched 11:41:40.828752 run osmo-stp_10.42.42.5(pid=17497): Launched 11:41:40.941942 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:41:41.480211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17499): Launched 11:41:41.590153 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:41:41.860354 run patchelf(pid=17500): Launched 11:41:42.041885 run osmo-stp_10.42.42.5(pid=17497): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17497)] 11:41:42.175024 run osmo-stp_10.42.42.5(pid=17497): stdout: | (launched: 2022-12-14_11:41:40.675781) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:41:42.308151 run osmo-stp_10.42.42.5(pid=17497): stderr: | �[0;m�[38;5;43m20221214114140845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114140845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114140845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114140846 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114140846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114140846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114140846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:41:42.435988 run osmo-stp_10.42.42.5(pid=17497): stdout: | (launched: 2022-12-14_11:41:40.675781) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:41:42.563120 run osmo-stp_10.42.42.5(pid=17497): stderr: | �[0;m�[38;5;43m20221214114140845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114140845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114140845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114140846 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114140846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114140846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114140846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:41:42.710497 run patchelf(pid=17500): Terminating (SIGINT) 11:41:42.884154 run patchelf(pid=17500): Terminated: ok {rc=0} 11:41:42.915944 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17497): Process ended prematurely: osmo-stp_10.42.42.5(pid=17497) [trial-2404↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17497)] [trial-2404↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:41:42.925106 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:41:42.986201 run osmo-hlr_10.42.42.2(pid=17494): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17494)] 11:41:43.035724 run osmo-hlr_10.42.42.2(pid=17494): stdout: | (launched: 2022-12-14_11:41:39.718806) 11:41:43.086120 run osmo-hlr_10.42.42.2(pid=17494): stderr: | �[0;m�[1;31m20221214114139897 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214114139897 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214114139897 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214114139897 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214114139897 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214114139897 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214114139908 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214114139917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214114139917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214114139917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:41:43.129099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17487): Terminating (SIGTERM) 11:41:43.170241 run iperf3-srv_10.42.42.10(pid=17488): Terminating (SIGTERM) 11:41:43.210711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17489): Terminating (SIGTERM) 11:41:43.250906 run iperf3-srv_10.42.42.10(pid=17490): Terminating (SIGTERM) 11:41:43.291495 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17493): Terminating (SIGTERM) 11:41:43.332083 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17496): Terminating (SIGTERM) 11:41:43.372509 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17499): Terminating (SIGTERM) 11:41:43.381715 --- ParallelTerminationStrategy: PID 17487 died... 11:41:43.436242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17487): Terminated: ok {rc=0} 11:41:43.445778 --- ParallelTerminationStrategy: PID 17488 died... 11:41:43.499660 run iperf3-srv_10.42.42.10(pid=17488): Terminated {rc=256} 11:41:43.509193 --- ParallelTerminationStrategy: PID 17489 died... 11:41:43.562812 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17489): Terminated: ok {rc=0} 11:41:43.572266 --- ParallelTerminationStrategy: PID 17490 died... 11:41:43.626047 run iperf3-srv_10.42.42.10(pid=17490): Terminated {rc=256} 11:41:43.635453 --- ParallelTerminationStrategy: PID 17493 died... 11:41:43.689885 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17493): Terminated: ok {rc=0} 11:41:43.699349 --- ParallelTerminationStrategy: PID 17496 died... 11:41:43.753347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17496): Terminated: ok {rc=0} 11:41:43.762870 --- ParallelTerminationStrategy: PID 17499 died... 11:41:43.816756 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17499): Terminated: ok {rc=0} 11:41:43.906936 bus /gobi_0: Setting Powered False 11:41:45.010091 bus /gobi_0: Setting Powered False 11:41:46.119046 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17497): Process ended prematurely: osmo-stp_10.42.42.5(pid=17497) [trial-2404↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17497)]