Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=15416): Process ended prematurely: osmo-stp_10.42.42.5(pid=15416) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15416)]
Standard Output
---------------------------------------------- trial-2349 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 21:17:08.243501 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.255349 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:17:08.402447 tst cs_paging_gprs_active.py: using LAC 16867 21:17:08.526744 tst cs_paging_gprs_active.py: using RAC 37 21:17:08.650556 tst cs_paging_gprs_active.py: using CellId 16867 21:17:08.775426 tst cs_paging_gprs_active.py: using BVCI 16868 21:17:08.800081 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.812039 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.823693 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.835470 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.847163 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.858801 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.870678 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.882669 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:08.894944 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:09.017980 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:09.309092 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:17:09.442458 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:09.772325 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15406): Launched 21:17:10.046794 run iperf3-srv_10.42.42.10(pid=15407): Launched 21:17:10.241802 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:17:10.374630 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:10.703670 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15408): Launched 21:17:10.977619 run iperf3-srv_10.42.42.10(pid=15409): Launched 21:17:11.173457 tst cs_paging_gprs_active.py:38: start network... 21:17:11.306201 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:17:11.819641 run create_hlr_db(pid=15410): Launched 21:17:12.004478 bus /gobi_6: Setting Powered False 21:17:13.025070 run create_hlr_db(pid=15410): Terminated: ok {rc=0} 21:17:13.451697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15412): Launched 21:17:13.771795 run osmo-hlr_10.42.42.2(pid=15413): Launched 21:17:13.887966 run osmo-stp_10.42.42.5: Starting osmo-stp 21:17:14.445198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15415): Launched 21:17:14.765878 run osmo-stp_10.42.42.5(pid=15416): Launched 21:17:14.881807 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:17:15.441490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15418): Launched 21:17:15.555631 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:17:15.843690 run patchelf(pid=15419): Launched 21:17:16.040872 run osmo-stp_10.42.42.5(pid=15416): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15416)] 21:17:16.181156 run osmo-stp_10.42.42.5(pid=15416): stdout: | (launched: 2022-12-08_21:17:14.608279) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:16.322079 run osmo-stp_10.42.42.5(pid=15416): stderr: | �[0;m�[38;5;43m20221208211714800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211714800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211714800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211714801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211714801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211714801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211714801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:16.458184 run osmo-stp_10.42.42.5(pid=15416): stdout: | (launched: 2022-12-08_21:17:14.608279) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:16.592569 run osmo-stp_10.42.42.5(pid=15416): stderr: | �[0;m�[38;5;43m20221208211714800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211714800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211714800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211714801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211714801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211714801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211714801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:16.748908 run patchelf(pid=15419): Terminating (SIGINT) 21:17:16.932517 run patchelf(pid=15419): Terminated: ok {rc=0} 21:17:16.966604 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15416): Process ended prematurely: osmo-stp_10.42.42.5(pid=15416) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15416)] [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 21:17:16.977543 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 21:17:17.042657 run osmo-hlr_10.42.42.2(pid=15413): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15413)] 21:17:17.094962 run osmo-hlr_10.42.42.2(pid=15413): stdout: | (launched: 2022-12-08_21:17:13.615313) 21:17:17.148092 run osmo-hlr_10.42.42.2(pid=15413): stderr: | �[0;m�[1;31m20221208211713812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208211713812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208211713812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208211713812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208211713812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208211713812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208211713824 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208211713832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208211713832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208211713832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:17:17.193005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15406): Terminating (SIGTERM) 21:17:17.234809 run iperf3-srv_10.42.42.10(pid=15407): Terminating (SIGTERM) 21:17:17.276628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15408): Terminating (SIGTERM) 21:17:17.318322 run iperf3-srv_10.42.42.10(pid=15409): Terminating (SIGTERM) 21:17:17.360200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15412): Terminating (SIGTERM) 21:17:17.402051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15415): Terminating (SIGTERM) 21:17:17.443763 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15418): Terminating (SIGTERM) 21:17:17.453403 --- ParallelTerminationStrategy: PID 15406 died... 21:17:17.509325 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15406): Terminated: ok {rc=0} 21:17:17.519363 --- ParallelTerminationStrategy: PID 15407 died... 21:17:17.574948 run iperf3-srv_10.42.42.10(pid=15407): Terminated {rc=256} 21:17:17.585158 --- ParallelTerminationStrategy: PID 15408 died... 21:17:17.640907 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15408): Terminated: ok {rc=0} 21:17:17.650977 --- ParallelTerminationStrategy: PID 15409 died... 21:17:17.706291 run iperf3-srv_10.42.42.10(pid=15409): Terminated {rc=256} 21:17:17.716325 --- ParallelTerminationStrategy: PID 15412 died... 21:17:17.771577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15412): Terminated: ok {rc=0} 21:17:17.781635 --- ParallelTerminationStrategy: PID 15415 died... 21:17:17.836843 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15415): Terminated: ok {rc=0} 21:17:17.846945 --- ParallelTerminationStrategy: PID 15418 died... 21:17:17.902409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15418): Terminated: ok {rc=0} 21:17:17.989573 bus /gobi_0: Setting Powered False 21:17:19.093465 bus /gobi_0: Setting Powered False 21:17:20.202829 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15416): Process ended prematurely: osmo-stp_10.42.42.5(pid=15416) [trial-2349↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15416)]