Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18818): Process ended prematurely: osmo-stp_10.42.42.5(pid=18818) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18818)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:00:08.030720 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.041473 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:08.184060 tst cs_paging_gprs_active.py: using LAC 17026 22:00:08.307479 tst cs_paging_gprs_active.py: using RAC 196 22:00:08.431574 tst cs_paging_gprs_active.py: using CellId 17026 22:00:08.557308 tst cs_paging_gprs_active.py: using BVCI 17027 22:00:08.582340 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.593716 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.604774 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.615723 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.626582 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.637593 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.648574 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.659443 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:08.670540 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:08.785363 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:09.061690 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:00:09.188395 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:09.500476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18808): Launched 22:00:09.761434 run iperf3-srv_10.42.42.10(pid=18809): Launched 22:00:09.946095 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:00:10.072694 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:10.385601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18810): Launched 22:00:10.645457 run iperf3-srv_10.42.42.10(pid=18811): Launched 22:00:10.830672 tst cs_paging_gprs_active.py:38: start network... 22:00:10.957463 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:00:11.434527 run create_hlr_db(pid=18812): Launched 22:00:11.608181 bus /gobi_6: Setting Powered False 22:00:12.641330 run create_hlr_db(pid=18812): Terminated: ok {rc=0} 22:00:13.068025 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18814): Launched 22:00:13.391055 run osmo-hlr_10.42.42.2(pid=18815): Launched 22:00:13.509179 run osmo-stp_10.42.42.5: Starting osmo-stp 22:00:14.067584 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18817): Launched 22:00:14.389646 run osmo-stp_10.42.42.5(pid=18818): Launched 22:00:14.507105 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:00:15.068039 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18820): Launched 22:00:15.183774 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:00:15.463999 run patchelf(pid=18821): Launched 22:00:15.652466 run osmo-stp_10.42.42.5(pid=18818): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18818)] 22:00:15.790518 run osmo-stp_10.42.42.5(pid=18818): stdout: | (launched: 2022-12-08_22:00:14.231878) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:15.970471 run osmo-stp_10.42.42.5(pid=18818): stderr: | �[0;m�[38;5;43m20221208220014422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220014422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220014422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220014422 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220014423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220014423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220014423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:16.134701 run osmo-stp_10.42.42.5(pid=18818): stdout: | (launched: 2022-12-08_22:00:14.231878) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:16.286232 run osmo-stp_10.42.42.5(pid=18818): stderr: | �[0;m�[38;5;43m20221208220014422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220014422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220014422 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220014422 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220014423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220014423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220014423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:16.444245 run patchelf(pid=18821): Terminating (SIGINT) 22:00:16.629786 run patchelf(pid=18821): Terminated: ok {rc=0} 22:00:16.665039 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18818): Process ended prematurely: osmo-stp_10.42.42.5(pid=18818) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18818)] [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:00:16.675876 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:00:16.741596 run osmo-hlr_10.42.42.2(pid=18815): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18815)] 22:00:16.795036 run osmo-hlr_10.42.42.2(pid=18815): stdout: | (launched: 2022-12-08_22:00:13.232927) 22:00:16.849629 run osmo-hlr_10.42.42.2(pid=18815): stderr: | �[0;m�[1;31m20221208220013430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220013431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220013431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220013431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220013431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220013431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220013443 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220013453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220013453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220013453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:00:16.897064 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18808): Terminating (SIGTERM) 22:00:16.943307 run iperf3-srv_10.42.42.10(pid=18809): Terminating (SIGTERM) 22:00:16.988809 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18810): Terminating (SIGTERM) 22:00:17.033514 run iperf3-srv_10.42.42.10(pid=18811): Terminating (SIGTERM) 22:00:17.081221 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18814): Terminating (SIGTERM) 22:00:17.124444 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18817): Terminating (SIGTERM) 22:00:17.168005 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18820): Terminating (SIGTERM) 22:00:17.177807 --- ParallelTerminationStrategy: PID 18808 died... 22:00:17.234646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18808): Terminated: ok {rc=0} 22:00:17.244741 --- ParallelTerminationStrategy: PID 18809 died... 22:00:17.301145 run iperf3-srv_10.42.42.10(pid=18809): Terminated {rc=256} 22:00:17.311197 --- ParallelTerminationStrategy: PID 18810 died... 22:00:17.367711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18810): Terminated: ok {rc=0} 22:00:17.377835 --- ParallelTerminationStrategy: PID 18811 died... 22:00:17.434861 run iperf3-srv_10.42.42.10(pid=18811): Terminated {rc=256} 22:00:17.445146 --- ParallelTerminationStrategy: PID 18814 died... 22:00:17.501624 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18814): Terminated: ok {rc=0} 22:00:17.511743 --- ParallelTerminationStrategy: PID 18817 died... 22:00:17.568359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18817): Terminated: ok {rc=0} 22:00:17.578548 --- ParallelTerminationStrategy: PID 18820 died... 22:00:17.635040 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18820): Terminated: ok {rc=0} 22:00:17.723204 bus /gobi_0: Setting Powered False 22:00:18.831549 bus /gobi_0: Setting Powered False 22:00:19.943531 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18818): Process ended prematurely: osmo-stp_10.42.42.5(pid=18818) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18818)]