Failed
dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=19903): Process ended prematurely: osmo-stp_10.42.42.5(pid=19903) [trial-2350↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19903)]
Standard Output
---------------------------------------------- trial-2350 dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 22:11:43.424059 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:43.435587 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 22:11:43.589435 tst switch_tch_pdch.py: using LAC 17087 22:11:43.706861 tst switch_tch_pdch.py: using RAC 2 22:11:43.822946 tst switch_tch_pdch.py: using CellId 17087 22:11:43.938825 tst switch_tch_pdch.py: using BVCI 17088 22:11:43.961681 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:43.972684 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:43.983550 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:43.994851 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:44.006215 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:44.017682 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:44.029249 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 22:11:44.040715 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 22:11:44.159709 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 22:11:44.433289 tst switch_tch_pdch.py:51: start network... 22:11:44.557102 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:11:45.024613 run create_hlr_db(pid=19897): Launched 22:11:45.196571 bus /gobi_6: Setting Powered False 22:11:46.220478 run create_hlr_db(pid=19897): Terminated: ok {rc=0} 22:11:46.691073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19899): Launched 22:11:47.112568 run osmo-hlr_10.42.42.2(pid=19900): Launched 22:11:47.231484 run osmo-stp_10.42.42.5: Starting osmo-stp 22:11:47.787477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19902): Launched 22:11:48.103773 run osmo-stp_10.42.42.5(pid=19903): Launched 22:11:48.218576 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:11:48.773476 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19905): Launched 22:11:48.886865 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:11:49.163583 run patchelf(pid=19906): Launched 22:11:49.351327 run osmo-stp_10.42.42.5(pid=19903): ERR: Terminated: ERROR {rc=1} [trial-2350↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19903)] 22:11:49.488852 run osmo-stp_10.42.42.5(pid=19903): stdout: | (launched: 2022-12-08_22:11:47.949309) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:11:49.626768 run osmo-stp_10.42.42.5(pid=19903): stderr: | �[0;m�[38;5;43m20221208221148139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221148139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221148139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221148140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221148140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221148140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221148140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:11:49.760229 run osmo-stp_10.42.42.5(pid=19903): stdout: | (launched: 2022-12-08_22:11:47.949309) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:11:49.892181 run osmo-stp_10.42.42.5(pid=19903): stderr: | �[0;m�[38;5;43m20221208221148139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221148139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221148139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221148140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221148140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221148140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221148140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:11:50.045509 run patchelf(pid=19906): Terminating (SIGINT) 22:11:50.224775 run patchelf(pid=19906): Terminated: ok {rc=0} 22:11:50.257441 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=19903): Process ended prematurely: osmo-stp_10.42.42.5(pid=19903) [trial-2350↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19903)] [trial-2350↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 22:11:50.266818 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 22:11:50.330724 run osmo-hlr_10.42.42.2(pid=19900): ERR: Terminated: ERROR {rc=237} [trial-2350↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19900)] 22:11:50.383135 run osmo-hlr_10.42.42.2(pid=19900): stdout: | (launched: 2022-12-08_22:11:46.857619) 22:11:50.436118 run osmo-hlr_10.42.42.2(pid=19900): stderr: | �[0;m�[1;31m20221208221147178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208221147178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208221147179 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208221147179 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208221147179 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208221147179 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208221147210 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208221147218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208221147218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208221147218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:11:50.481358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19899): Terminating (SIGTERM) 22:11:50.524017 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19902): Terminating (SIGTERM) 22:11:50.566891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19905): Terminating (SIGTERM) 22:11:50.576724 --- ParallelTerminationStrategy: PID 19899 died... 22:11:50.633946 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19899): Terminated: ok {rc=0} 22:11:50.644282 --- ParallelTerminationStrategy: PID 19902 died... 22:11:50.701097 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19902): Terminated: ok {rc=0} 22:11:50.711462 --- ParallelTerminationStrategy: PID 19905 died... 22:11:50.768278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19905): Terminated: ok {rc=0} 22:11:50.855877 bus /gobi_0: Setting Powered False 22:11:51.963516 bus /gobi_0: Setting Powered False 22:11:53.071440 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19903): Process ended prematurely: osmo-stp_10.42.42.5(pid=19903) [trial-2350↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19903)]