Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20463): Process ended prematurely: osmo-stp_10.42.42.5(pid=20463) [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20463)]
Standard Output
---------------------------------------------- trial-2350 dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 22:19:45.426102 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:45.436913 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 22:19:45.598979 tst switch_tch_pdch.py: using LAC 17130 22:19:45.725919 tst switch_tch_pdch.py: using RAC 45 22:19:45.869233 tst switch_tch_pdch.py: using CellId 17130 22:19:45.994567 tst switch_tch_pdch.py: using BVCI 17131 22:19:46.018491 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.030496 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.042965 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.055635 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.068565 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.080539 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.094646 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 22:19:46.107319 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 22:19:46.242310 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 22:19:46.522068 tst switch_tch_pdch.py:51: start network... 22:19:46.650928 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:19:47.154531 run create_hlr_db(pid=20457): Launched 22:19:47.281112 bus /gobi_6: Setting Powered False 22:19:48.361901 run create_hlr_db(pid=20457): Terminated: ok {rc=0} 22:19:48.757435 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20459): Launched 22:19:49.074138 run osmo-hlr_10.42.42.2(pid=20460): Launched 22:19:49.194565 run osmo-stp_10.42.42.5: Starting osmo-stp 22:19:49.717954 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20462): Launched 22:19:50.033143 run osmo-stp_10.42.42.5(pid=20463): Launched 22:19:50.147594 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:19:50.673177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20465): Launched 22:19:50.786570 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:19:51.064248 run patchelf(pid=20466): Launched 22:19:51.251695 run osmo-stp_10.42.42.5(pid=20463): ERR: Terminated: ERROR {rc=1} [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20463)] 22:19:51.389382 run osmo-stp_10.42.42.5(pid=20463): stdout: | (launched: 2022-12-08_22:19:49.878862) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:19:51.526676 run osmo-stp_10.42.42.5(pid=20463): stderr: | �[0;m�[38;5;43m20221208221950070 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221950070 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221950070 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221950070 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221950073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221950073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221950073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:19:51.658874 run osmo-stp_10.42.42.5(pid=20463): stdout: | (launched: 2022-12-08_22:19:49.878862) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:19:51.790167 run osmo-stp_10.42.42.5(pid=20463): stderr: | �[0;m�[38;5;43m20221208221950070 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221950070 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221950070 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221950070 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221950073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221950073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221950073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:19:51.943452 run patchelf(pid=20466): Terminating (SIGINT) 22:19:52.123766 run patchelf(pid=20466): Terminated: ok {rc=0} 22:19:52.156297 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=20463): Process ended prematurely: osmo-stp_10.42.42.5(pid=20463) [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20463)] [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 22:19:52.165666 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 22:19:52.229029 run osmo-hlr_10.42.42.2(pid=20460): ERR: Terminated: ERROR {rc=237} [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20460)] 22:19:52.280894 run osmo-hlr_10.42.42.2(pid=20460): stdout: | (launched: 2022-12-08_22:19:48.919633) 22:19:52.333298 run osmo-hlr_10.42.42.2(pid=20460): stderr: | �[0;m�[1;31m20221208221949117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208221949117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208221949117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208221949118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208221949118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208221949118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208221949131 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208221949140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208221949141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208221949141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:19:52.378033 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20459): Terminating (SIGTERM) 22:19:52.420094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20462): Terminating (SIGTERM) 22:19:52.462973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20465): Terminating (SIGTERM) 22:19:52.472667 --- ParallelTerminationStrategy: PID 20459 died... 22:19:52.529375 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20459): Terminated: ok {rc=0} 22:19:52.539480 --- ParallelTerminationStrategy: PID 20462 died... 22:19:52.595471 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20462): Terminated: ok {rc=0} 22:19:52.605622 --- ParallelTerminationStrategy: PID 20465 died... 22:19:52.661651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20465): Terminated: ok {rc=0} 22:19:52.748531 bus /gobi_0: Setting Powered False 22:19:53.852630 bus /gobi_0: Setting Powered False 22:19:54.963578 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20463): Process ended prematurely: osmo-stp_10.42.42.5(pid=20463) [trial-2350↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20463)]