Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24943): Process ended prematurely: osmo-stp_10.42.42.5(pid=24943) [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24943)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:57:01.947244 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:01.963927 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:57:02.118022 tst cs_paging_gprs_active.py: using LAC 17328 22:57:02.256829 tst cs_paging_gprs_active.py: using RAC 243 22:57:02.383030 tst cs_paging_gprs_active.py: using CellId 17328 22:57:02.510993 tst cs_paging_gprs_active.py: using BVCI 17329 22:57:02.535860 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.547560 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.559212 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.570948 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.582533 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.594040 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.605737 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.617209 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:02.628844 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:02.745964 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:03.038298 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:57:03.173914 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:03.506657 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24933): Launched 22:57:03.784326 run iperf3-srv_10.42.42.10(pid=24934): Launched 22:57:03.981646 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:57:04.116598 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:04.450156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24935): Launched 22:57:04.727535 run iperf3-srv_10.42.42.10(pid=24936): Launched 22:57:04.925370 tst cs_paging_gprs_active.py:38: start network... 22:57:05.060014 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:57:05.578415 run create_hlr_db(pid=24937): Launched 22:57:05.764847 bus /gobi_6: Setting Powered False 22:57:06.786418 run create_hlr_db(pid=24937): Terminated: ok {rc=0} 22:57:07.193066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24939): Launched 22:57:07.495209 run osmo-hlr_10.42.42.2(pid=24940): Launched 22:57:07.612598 run osmo-stp_10.42.42.5: Starting osmo-stp 22:57:08.143626 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24942): Launched 22:57:08.448017 run osmo-stp_10.42.42.5(pid=24943): Launched 22:57:08.559918 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:57:09.089891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24945): Launched 22:57:09.198665 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:57:09.463913 run patchelf(pid=24946): Launched 22:57:09.642984 run osmo-stp_10.42.42.5(pid=24943): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24943)] 22:57:09.774048 run osmo-stp_10.42.42.5(pid=24943): stdout: | (launched: 2022-12-08_22:57:08.298312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:09.905799 run osmo-stp_10.42.42.5(pid=24943): stderr: | �[0;m�[38;5;43m20221208225708468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225708468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225708468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225708469 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225708469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225708469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225708469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:10.033784 run osmo-stp_10.42.42.5(pid=24943): stdout: | (launched: 2022-12-08_22:57:08.298312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:10.160641 run osmo-stp_10.42.42.5(pid=24943): stderr: | �[0;m�[38;5;43m20221208225708468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225708468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225708468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225708469 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225708469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225708469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225708469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:10.307298 run patchelf(pid=24946): Terminating (SIGINT) 22:57:10.479595 run patchelf(pid=24946): Terminated: ok {rc=0} 22:57:10.511232 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24943): Process ended prematurely: osmo-stp_10.42.42.5(pid=24943) [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24943)] [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:57:10.520491 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:57:10.582168 run osmo-hlr_10.42.42.2(pid=24940): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24940)] 22:57:10.632721 run osmo-hlr_10.42.42.2(pid=24940): stdout: | (launched: 2022-12-08_22:57:07.347306) 22:57:10.683681 run osmo-hlr_10.42.42.2(pid=24940): stderr: | �[0;m�[1;31m20221208225707521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225707521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225707522 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225707522 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225707522 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225707522 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225707534 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225707543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225707543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225707543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:57:10.726476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24933): Terminating (SIGTERM) 22:57:10.767434 run iperf3-srv_10.42.42.10(pid=24934): Terminating (SIGTERM) 22:57:10.808122 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24935): Terminating (SIGTERM) 22:57:10.849155 run iperf3-srv_10.42.42.10(pid=24936): Terminating (SIGTERM) 22:57:10.890192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24939): Terminating (SIGTERM) 22:57:10.930794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24942): Terminating (SIGTERM) 22:57:10.971565 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24945): Terminating (SIGTERM) 22:57:10.981068 --- ParallelTerminationStrategy: PID 24933 died... 22:57:11.035289 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24933): Terminated: ok {rc=0} 22:57:11.045237 --- ParallelTerminationStrategy: PID 24934 died... 22:57:11.099337 run iperf3-srv_10.42.42.10(pid=24934): Terminated {rc=256} 22:57:11.108904 --- ParallelTerminationStrategy: PID 24935 died... 22:57:11.163298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24935): Terminated: ok {rc=0} 22:57:11.173266 --- ParallelTerminationStrategy: PID 24936 died... 22:57:11.227400 run iperf3-srv_10.42.42.10(pid=24936): Terminated {rc=256} 22:57:11.237156 --- ParallelTerminationStrategy: PID 24939 died... 22:57:11.291202 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24939): Terminated: ok {rc=0} 22:57:11.300813 --- ParallelTerminationStrategy: PID 24942 died... 22:57:11.355561 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24942): Terminated: ok {rc=0} 22:57:11.365279 --- ParallelTerminationStrategy: PID 24945 died... 22:57:11.419506 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24945): Terminated: ok {rc=0} 22:57:11.504564 bus /gobi_0: Setting Powered False 22:57:12.612642 bus /gobi_0: Setting Powered False 22:57:13.724600 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24943): Process ended prematurely: osmo-stp_10.42.42.5(pid=24943) [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24943)]