Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24956): Process ended prematurely: osmo-stp_10.42.42.5(pid=24956) [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24956)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 22:57:14.836075 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.848042 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:57:14.992092 tst iperf3.py: using LAC 17329 22:57:15.120247 tst iperf3.py: using RAC 244 22:57:15.249063 tst iperf3.py: using CellId 17329 22:57:15.375119 tst iperf3.py: using BVCI 17330 22:57:15.399813 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.411714 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.423354 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.435815 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.447582 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.459334 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.471142 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.482755 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:15.494650 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:15.789968 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:57:15.941714 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:16.289080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24948): Launched 22:57:16.582044 run iperf3-srv_10.42.42.10(pid=24949): Launched 22:57:16.781581 tst iperf3.py:8: start network... 22:57:16.917952 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:57:17.437412 run create_hlr_db(pid=24950): Launched 22:57:17.622956 bus /gobi_6: Setting Powered False 22:57:18.644669 run create_hlr_db(pid=24950): Terminated: ok {rc=0} 22:57:19.051633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24952): Launched 22:57:19.355726 run osmo-hlr_10.42.42.2(pid=24953): Launched 22:57:19.472063 run osmo-stp_10.42.42.5: Starting osmo-stp 22:57:20.008590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24955): Launched 22:57:20.311883 run osmo-stp_10.42.42.5(pid=24956): Launched 22:57:20.422256 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:57:20.948938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24958): Launched 22:57:21.057448 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:57:21.323333 run patchelf(pid=24959): Launched 22:57:21.502271 run osmo-stp_10.42.42.5(pid=24956): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24956)] 22:57:21.633107 run osmo-stp_10.42.42.5(pid=24956): stdout: | (launched: 2022-12-08_22:57:20.162773) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:21.764402 run osmo-stp_10.42.42.5(pid=24956): stderr: | �[0;m�[38;5;43m20221208225720333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225720333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225720333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225720334 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225720336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225720336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225720336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:21.891736 run osmo-stp_10.42.42.5(pid=24956): stdout: | (launched: 2022-12-08_22:57:20.162773) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:22.017726 run osmo-stp_10.42.42.5(pid=24956): stderr: | �[0;m�[38;5;43m20221208225720333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225720333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225720333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225720334 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225720336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225720336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225720336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:22.164097 run patchelf(pid=24959): Terminating (SIGINT) 22:57:22.336347 run patchelf(pid=24959): Terminated: ok {rc=0} 22:57:22.367853 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24956): Process ended prematurely: osmo-stp_10.42.42.5(pid=24956) [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24956)] [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 22:57:22.377226 tst iperf3.py:8: Test FAILED (7.6 sec) 22:57:22.438919 run osmo-hlr_10.42.42.2(pid=24953): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24953)] 22:57:22.489281 run osmo-hlr_10.42.42.2(pid=24953): stdout: | (launched: 2022-12-08_22:57:19.206282) 22:57:22.540177 run osmo-hlr_10.42.42.2(pid=24953): stderr: | �[0;m�[1;31m20221208225719384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225719384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225719384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225719384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225719385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225719385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225719400 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225719409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225719410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225719410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:57:22.582786 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24948): Terminating (SIGTERM) 22:57:22.623343 run iperf3-srv_10.42.42.10(pid=24949): Terminating (SIGTERM) 22:57:22.663924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24952): Terminating (SIGTERM) 22:57:22.704363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24955): Terminating (SIGTERM) 22:57:22.744775 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24958): Terminating (SIGTERM) 22:57:22.754258 --- ParallelTerminationStrategy: PID 24948 died... 22:57:22.808722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24948): Terminated: ok {rc=0} 22:57:22.818569 --- ParallelTerminationStrategy: PID 24949 died... 22:57:22.872328 run iperf3-srv_10.42.42.10(pid=24949): Terminated {rc=256} 22:57:22.882157 --- ParallelTerminationStrategy: PID 24952 died... 22:57:22.935907 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24952): Terminated: ok {rc=0} 22:57:22.945815 --- ParallelTerminationStrategy: PID 24955 died... 22:57:23.000226 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24955): Terminated: ok {rc=0} 22:57:23.010040 --- ParallelTerminationStrategy: PID 24958 died... 22:57:23.063867 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24958): Terminated: ok {rc=0} 22:57:23.153374 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24956): Process ended prematurely: osmo-stp_10.42.42.5(pid=24956) [trial-2350↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24956)]