Failed
gprs:oc2g+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18868): Process ended prematurely: osmo-stp_10.42.42.5(pid=18868) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18868)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 22:00:58.871288 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:58.883660 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:59.030022 tst ping_idle_ping.py: using LAC 17030 22:00:59.147655 tst ping_idle_ping.py: using RAC 200 22:00:59.266263 tst ping_idle_ping.py: using CellId 17030 22:00:59.389612 tst ping_idle_ping.py: using BVCI 17031 22:00:59.412402 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.423312 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.433918 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.445424 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.456575 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.467950 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.479522 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:59.490789 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:59.762586 tst ping_idle_ping.py:24: start network... 22:00:59.886391 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:01:00.354806 run create_hlr_db(pid=18862): Launched 22:01:00.527205 bus /gobi_6: Setting Powered False 22:01:01.576490 run create_hlr_db(pid=18862): Terminated: ok {rc=0} 22:01:01.997179 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18864): Launched 22:01:02.299104 run osmo-hlr_10.42.42.2(pid=18865): Launched 22:01:02.414308 run osmo-stp_10.42.42.5: Starting osmo-stp 22:01:02.937082 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18867): Launched 22:01:03.231823 run osmo-stp_10.42.42.5(pid=18868): Launched 22:01:03.340284 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:01:03.856732 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18870): Launched 22:01:03.962019 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:01:04.220433 run patchelf(pid=18871): Launched 22:01:04.395472 run osmo-stp_10.42.42.5(pid=18868): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18868)] 22:01:04.523905 run osmo-stp_10.42.42.5(pid=18868): stdout: | (launched: 2022-12-08_22:01:03.087482) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:04.652311 run osmo-stp_10.42.42.5(pid=18868): stderr: | �[0;m�[38;5;43m20221208220103255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220103255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220103255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220103256 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220103256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220103256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220103256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:04.776039 run osmo-stp_10.42.42.5(pid=18868): stdout: | (launched: 2022-12-08_22:01:03.087482) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:04.899136 run osmo-stp_10.42.42.5(pid=18868): stderr: | �[0;m�[38;5;43m20221208220103255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220103255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220103255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220103256 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220103256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220103256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220103256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:05.041804 run patchelf(pid=18871): Terminating (SIGINT) 22:01:05.209466 run patchelf(pid=18871): Terminated: ok {rc=0} 22:01:05.239761 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18868): Process ended prematurely: osmo-stp_10.42.42.5(pid=18868) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18868)] [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 22:01:05.248361 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 22:01:05.309587 run osmo-hlr_10.42.42.2(pid=18865): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18865)] 22:01:05.359683 run osmo-hlr_10.42.42.2(pid=18865): stdout: | (launched: 2022-12-08_22:01:02.151378) 22:01:05.410431 run osmo-hlr_10.42.42.2(pid=18865): stderr: | �[0;m�[1;31m20221208220102324 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220102324 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220102325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220102325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220102325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220102325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220102337 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220102345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220102346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220102346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:01:05.453497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18864): Terminating (SIGTERM) 22:01:05.494098 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18867): Terminating (SIGTERM) 22:01:05.534769 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18870): Terminating (SIGTERM) 22:01:05.544362 --- ParallelTerminationStrategy: PID 18864 died... 22:01:05.598589 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18864): Terminated: ok {rc=0} 22:01:05.608567 --- ParallelTerminationStrategy: PID 18867 died... 22:01:05.662660 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18867): Terminated: ok {rc=0} 22:01:05.672718 --- ParallelTerminationStrategy: PID 18870 died... 22:01:05.726963 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18870): Terminated: ok {rc=0} 22:01:05.811427 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18868): Process ended prematurely: osmo-stp_10.42.42.5(pid=18868) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18868)]