Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18747): Process ended prematurely: osmo-stp_10.42.42.5(pid=18747) [trial-2350↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18747)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 21:59:08.611151 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:08.621609 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:59:08.745922 tst cs_paging_gprs_active.py: using LAC 17021 21:59:08.864286 tst cs_paging_gprs_active.py: using RAC 191 21:59:08.985963 tst cs_paging_gprs_active.py: using CellId 17021 21:59:09.104554 tst cs_paging_gprs_active.py: using BVCI 17022 21:59:09.127602 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.138346 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.148783 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.159472 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.170119 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.180593 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.191413 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.202042 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:09.212828 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:09.330644 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:09.608243 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:59:09.734388 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:10.047171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18737): Launched 21:59:10.308351 run iperf3-srv_10.42.42.10(pid=18738): Launched 21:59:10.492804 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:59:10.618952 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:10.932631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18739): Launched 21:59:11.194340 run iperf3-srv_10.42.42.10(pid=18740): Launched 21:59:11.378543 tst cs_paging_gprs_active.py:38: start network... 21:59:11.504506 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:59:12.024752 run create_hlr_db(pid=18741): Launched 21:59:12.212080 bus /gobi_6: Setting Powered False 21:59:13.233674 run create_hlr_db(pid=18741): Terminated: ok {rc=0} 21:59:13.663651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18743): Launched 21:59:13.986385 run osmo-hlr_10.42.42.2(pid=18744): Launched 21:59:14.104219 run osmo-stp_10.42.42.5: Starting osmo-stp 21:59:14.665091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18746): Launched 21:59:14.992026 run osmo-stp_10.42.42.5(pid=18747): Launched 21:59:15.108842 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:59:15.672317 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18749): Launched 21:59:15.787656 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:59:16.090933 run patchelf(pid=18750): Launched 21:59:16.283249 run osmo-stp_10.42.42.5(pid=18747): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18747)] 21:59:16.427102 run osmo-stp_10.42.42.5(pid=18747): stdout: | (launched: 2022-12-08_21:59:14.830622) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:16.568060 run osmo-stp_10.42.42.5(pid=18747): stderr: | �[0;m�[38;5;43m20221208215915022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215915022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215915022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215915023 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215915023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215915023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215915023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:16.704709 run osmo-stp_10.42.42.5(pid=18747): stdout: | (launched: 2022-12-08_21:59:14.830622) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:16.840445 run osmo-stp_10.42.42.5(pid=18747): stderr: | �[0;m�[38;5;43m20221208215915022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215915022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215915022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215915023 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215915023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215915023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215915023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:16.996867 run patchelf(pid=18750): Terminating (SIGINT) 21:59:17.180245 run patchelf(pid=18750): Terminated: ok {rc=0} 21:59:17.213873 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18747): Process ended prematurely: osmo-stp_10.42.42.5(pid=18747) [trial-2350↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18747)] [trial-2350↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 21:59:17.224044 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 21:59:17.288316 run osmo-hlr_10.42.42.2(pid=18744): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18744)] 21:59:17.341060 run osmo-hlr_10.42.42.2(pid=18744): stdout: | (launched: 2022-12-08_21:59:13.828126) 21:59:17.394569 run osmo-hlr_10.42.42.2(pid=18744): stderr: | �[0;m�[1;31m20221208215914024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208215914024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208215914024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208215914024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208215914024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208215914024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208215914036 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208215914044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208215914045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208215914045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:59:17.440131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18737): Terminating (SIGTERM) 21:59:17.482896 run iperf3-srv_10.42.42.10(pid=18738): Terminating (SIGTERM) 21:59:17.525535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18739): Terminating (SIGTERM) 21:59:17.568134 run iperf3-srv_10.42.42.10(pid=18740): Terminating (SIGTERM) 21:59:17.611596 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18743): Terminating (SIGTERM) 21:59:17.654642 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18746): Terminating (SIGTERM) 21:59:17.697592 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18749): Terminating (SIGTERM) 21:59:17.707397 --- ParallelTerminationStrategy: PID 18737 died... 21:59:17.764713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18737): Terminated: ok {rc=0} 21:59:17.775032 --- ParallelTerminationStrategy: PID 18738 died... 21:59:17.831705 run iperf3-srv_10.42.42.10(pid=18738): Terminated {rc=256} 21:59:17.841952 --- ParallelTerminationStrategy: PID 18739 died... 21:59:17.898570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18739): Terminated: ok {rc=0} 21:59:17.908706 --- ParallelTerminationStrategy: PID 18740 died... 21:59:17.965582 run iperf3-srv_10.42.42.10(pid=18740): Terminated {rc=256} 21:59:17.975843 --- ParallelTerminationStrategy: PID 18743 died... 21:59:18.032725 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18743): Terminated: ok {rc=0} 21:59:18.042874 --- ParallelTerminationStrategy: PID 18746 died... 21:59:18.099834 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18746): Terminated: ok {rc=0} 21:59:18.110024 --- ParallelTerminationStrategy: PID 18749 died... 21:59:18.167101 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18749): Terminated: ok {rc=0} 21:59:18.256062 bus /gobi_0: Setting Powered False 21:59:19.364474 bus /gobi_0: Setting Powered False 21:59:20.474256 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18747): Process ended prematurely: osmo-stp_10.42.42.5(pid=18747) [trial-2350↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18747)]