Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=17988): Process ended prematurely: osmo-stp_10.42.42.5(pid=17988) [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17988)]
Standard Output
---------------------------------------------- trial-2350 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 21:52:11.730470 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:11.741228 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:52:11.886321 tst cs_paging_gprs_active.py: using LAC 16984 21:52:12.007992 tst cs_paging_gprs_active.py: using RAC 154 21:52:12.129821 tst cs_paging_gprs_active.py: using CellId 16984 21:52:12.250216 tst cs_paging_gprs_active.py: using BVCI 16985 21:52:12.273595 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.284346 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.295002 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.305619 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.316101 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.326719 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.337833 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.348249 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:12.359349 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:52:12.479187 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:52:12.760637 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:52:12.887843 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:52:13.204090 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17978): Launched 21:52:13.466615 run iperf3-srv_10.42.42.10(pid=17979): Launched 21:52:13.651854 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:52:13.778270 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:52:14.094002 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17980): Launched 21:52:14.358047 run iperf3-srv_10.42.42.10(pid=17981): Launched 21:52:14.543944 tst cs_paging_gprs_active.py:38: start network... 21:52:14.671111 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:52:15.166135 run create_hlr_db(pid=17982): Launched 21:52:15.356850 bus /gobi_6: Setting Powered False 21:52:16.374222 run create_hlr_db(pid=17982): Terminated: ok {rc=0} 21:52:16.803270 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17984): Launched 21:52:17.140448 run osmo-hlr_10.42.42.2(pid=17985): Launched 21:52:17.285922 run osmo-stp_10.42.42.5: Starting osmo-stp 21:52:17.821126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17987): Launched 21:52:18.126554 run osmo-stp_10.42.42.5(pid=17988): Launched 21:52:18.237154 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:52:18.771156 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17990): Launched 21:52:18.879900 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:52:19.146628 run patchelf(pid=17991): Launched 21:52:19.325795 run osmo-stp_10.42.42.5(pid=17988): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17988)] 21:52:19.457162 run osmo-stp_10.42.42.5(pid=17988): stdout: | (launched: 2022-12-08_21:52:17.977090) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:52:19.588710 run osmo-stp_10.42.42.5(pid=17988): stderr: | �[0;m�[38;5;43m20221208215218149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215218149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215218150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215218150 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215218151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215218151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215218151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:52:19.716353 run osmo-stp_10.42.42.5(pid=17988): stdout: | (launched: 2022-12-08_21:52:17.977090) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:52:19.842988 run osmo-stp_10.42.42.5(pid=17988): stderr: | �[0;m�[38;5;43m20221208215218149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215218149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215218150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215218150 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215218151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215218151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215218151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:52:19.989123 run patchelf(pid=17991): Terminating (SIGINT) 21:52:20.161982 run patchelf(pid=17991): Terminated: ok {rc=0} 21:52:20.193604 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17988): Process ended prematurely: osmo-stp_10.42.42.5(pid=17988) [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17988)] [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 21:52:20.202823 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 21:52:20.263455 run osmo-hlr_10.42.42.2(pid=17985): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17985)] 21:52:20.314761 run osmo-hlr_10.42.42.2(pid=17985): stdout: | (launched: 2022-12-08_21:52:16.962684) 21:52:20.365133 run osmo-hlr_10.42.42.2(pid=17985): stderr: | �[0;m�[1;31m20221208215217277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208215217277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208215217277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208215217277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208215217277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208215217277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208215217292 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208215217302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208215217302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208215217302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:52:20.407775 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17978): Terminating (SIGTERM) 21:52:20.447825 run iperf3-srv_10.42.42.10(pid=17979): Terminating (SIGTERM) 21:52:20.487913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17980): Terminating (SIGTERM) 21:52:20.527950 run iperf3-srv_10.42.42.10(pid=17981): Terminating (SIGTERM) 21:52:20.568062 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17984): Terminating (SIGTERM) 21:52:20.608108 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17987): Terminating (SIGTERM) 21:52:20.648355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17990): Terminating (SIGTERM) 21:52:20.657585 --- ParallelTerminationStrategy: PID 17978 died... 21:52:20.711442 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17978): Terminated: ok {rc=0} 21:52:20.721146 --- ParallelTerminationStrategy: PID 17979 died... 21:52:20.774509 run iperf3-srv_10.42.42.10(pid=17979): Terminated {rc=256} 21:52:20.784092 --- ParallelTerminationStrategy: PID 17980 died... 21:52:20.837446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17980): Terminated: ok {rc=0} 21:52:20.847036 --- ParallelTerminationStrategy: PID 17981 died... 21:52:20.900322 run iperf3-srv_10.42.42.10(pid=17981): Terminated {rc=256} 21:52:20.910038 --- ParallelTerminationStrategy: PID 17984 died... 21:52:20.963472 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17984): Terminated: ok {rc=0} 21:52:20.973180 --- ParallelTerminationStrategy: PID 17987 died... 21:52:21.026727 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17987): Terminated: ok {rc=0} 21:52:21.036348 --- ParallelTerminationStrategy: PID 17990 died... 21:52:21.089693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17990): Terminated: ok {rc=0} 21:52:21.178216 bus /gobi_0: Setting Powered False 21:52:22.281540 bus /gobi_0: Setting Powered False 21:52:23.389340 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17988): Process ended prematurely: osmo-stp_10.42.42.5(pid=17988) [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17988)]