Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18316): Process ended prematurely: osmo-stp_10.42.42.5(pid=18316) [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18316)]
Standard Output
---------------------------------------------- trial-2350 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 21:53:02.562765 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:02.579313 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:53:02.759719 tst ping_idle_ping.py: using LAC 16988 21:53:02.922450 tst ping_idle_ping.py: using RAC 158 21:53:03.060055 tst ping_idle_ping.py: using CellId 16988 21:53:03.207494 tst ping_idle_ping.py: using BVCI 16989 21:53:03.236664 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.248919 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.265045 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.276208 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.292756 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.303749 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.316697 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:53:03.334076 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:53:03.681312 tst ping_idle_ping.py:24: start network... 21:53:03.840020 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:53:04.398177 run create_hlr_db(pid=18308): Launched 21:53:04.593666 bus /gobi_6: Setting Powered False 21:53:05.613662 run create_hlr_db(pid=18308): Terminated: ok {rc=0} 21:53:06.050813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18311): Launched 21:53:06.470684 run osmo-hlr_10.42.42.2(pid=18313): Launched 21:53:06.722144 run osmo-stp_10.42.42.5: Starting osmo-stp 21:53:07.309141 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18315): Launched 21:53:07.741532 run osmo-stp_10.42.42.5(pid=18316): Launched 21:53:07.967448 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:53:08.555403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18318): Launched 21:53:08.677444 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:53:08.980613 run patchelf(pid=18319): Launched 21:53:09.175795 run osmo-stp_10.42.42.5(pid=18316): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18316)] 21:53:09.320353 run osmo-stp_10.42.42.5(pid=18316): stdout: | (launched: 2022-12-08_21:53:07.479371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:53:09.465988 run osmo-stp_10.42.42.5(pid=18316): stderr: | �[0;m�[38;5;43m20221208215307778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215307778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215307779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215307779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215307780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215307780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215307780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:53:09.604883 run osmo-stp_10.42.42.5(pid=18316): stdout: | (launched: 2022-12-08_21:53:07.479371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:53:09.745517 run osmo-stp_10.42.42.5(pid=18316): stderr: | �[0;m�[38;5;43m20221208215307778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215307778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215307779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215307779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215307780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215307780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215307780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:53:09.905239 run patchelf(pid=18319): Terminating (SIGINT) 21:53:10.091851 run patchelf(pid=18319): Terminated: ok {rc=0} 21:53:10.126951 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18316): Process ended prematurely: osmo-stp_10.42.42.5(pid=18316) [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18316)] [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 21:53:10.137405 tst ping_idle_ping.py:27: Test FAILED (7.6 sec) 21:53:10.207067 run osmo-hlr_10.42.42.2(pid=18313): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18313)] 21:53:10.263248 run osmo-hlr_10.42.42.2(pid=18313): stdout: | (launched: 2022-12-08_21:53:06.205456) 21:53:10.320039 run osmo-hlr_10.42.42.2(pid=18313): stderr: | �[0;m�[1;31m20221208215306512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208215306512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208215306512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208215306512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208215306512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208215306512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208215306535 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208215306551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208215306551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208215306552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:53:10.368093 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18311): Terminating (SIGTERM) 21:53:10.413087 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18315): Terminating (SIGTERM) 21:53:10.460207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18318): Terminating (SIGTERM) 21:53:10.473399 --- ParallelTerminationStrategy: PID 18311 died... 21:53:10.535684 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18311): Terminated: ok {rc=0} 21:53:10.546986 --- ParallelTerminationStrategy: PID 18315 died... 21:53:10.606724 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18315): Terminated: ok {rc=0} 21:53:10.619442 --- ParallelTerminationStrategy: PID 18318 died... 21:53:10.681171 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18318): Terminated: ok {rc=0} 21:53:10.773984 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18316): Process ended prematurely: osmo-stp_10.42.42.5(pid=18316) [trial-2350↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18316)]