Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17853): Process ended prematurely: osmo-stp_10.42.42.5(pid=17853) [trial-2350↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17853)]
Standard Output
---------------------------------------------- trial-2350 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 21:50:10.527716 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:10.538540 tst gprs:sysmo: Using 1 x bts (candidates: 1) 21:50:10.672684 tst cs_paging_gprs_active.py: using LAC 16974 21:50:10.799493 tst cs_paging_gprs_active.py: using RAC 144 21:50:10.926426 tst cs_paging_gprs_active.py: using CellId 16974 21:50:11.049973 tst cs_paging_gprs_active.py: using BVCI 16975 21:50:11.073306 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.083624 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.093961 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.104229 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.114676 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.124893 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.135214 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.145475 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:50:11.155800 tst gprs:sysmo: Using 1 x modem (candidates: 4) 21:50:11.274860 tst gprs:sysmo: Using 1 x modem (candidates: 4) 21:50:11.572346 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:50:11.710407 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:50:12.048311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17843): Launched 21:50:12.328851 run iperf3-srv_10.42.42.10(pid=17844): Launched 21:50:12.515784 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:50:12.643794 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:50:12.960225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17845): Launched 21:50:13.223191 run iperf3-srv_10.42.42.10(pid=17846): Launched 21:50:13.409546 tst cs_paging_gprs_active.py:38: start network... 21:50:13.536137 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:50:14.026323 run create_hlr_db(pid=17847): Launched 21:50:14.201611 bus /sierra_2: Setting Powered False 21:50:15.225200 run create_hlr_db(pid=17847): Terminated: ok {rc=0} 21:50:15.660019 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17849): Launched 21:50:16.115238 run osmo-hlr_10.42.42.2(pid=17850): Launched 21:50:16.261397 run osmo-stp_10.42.42.5: Starting osmo-stp 21:50:17.006059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17852): Launched 21:50:17.501593 run osmo-stp_10.42.42.5(pid=17853): Launched 21:50:17.640247 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:50:19.151827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17855): Launched 21:50:19.260278 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:50:19.529115 run patchelf(pid=17856): Launched 21:50:19.708626 run osmo-stp_10.42.42.5(pid=17853): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17853)] 21:50:19.840270 run osmo-stp_10.42.42.5(pid=17853): stdout: | (launched: 2022-12-08_21:50:17.218535) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:50:19.972082 run osmo-stp_10.42.42.5(pid=17853): stderr: | �[0;m�[38;5;43m20221208215017433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215017433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215017433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215017434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215017434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215017434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215017434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:50:20.099903 run osmo-stp_10.42.42.5(pid=17853): stdout: | (launched: 2022-12-08_21:50:17.218535) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:50:20.227092 run osmo-stp_10.42.42.5(pid=17853): stderr: | �[0;m�[38;5;43m20221208215017433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215017433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215017433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215017434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215017434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215017434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215017434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:50:20.373753 run patchelf(pid=17856): Terminating (SIGINT) 21:50:20.546166 run patchelf(pid=17856): Terminated: ok {rc=0} 21:50:20.577769 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17853): Process ended prematurely: osmo-stp_10.42.42.5(pid=17853) [trial-2350↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17853)] [trial-2350↪gprs:sysmo↪cs_paging_gprs_active.py:38] 21:50:20.586906 tst cs_paging_gprs_active.py:38: Test FAILED (10.1 sec) 21:50:20.648214 run osmo-hlr_10.42.42.2(pid=17850): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17850)] 21:50:20.698086 run osmo-hlr_10.42.42.2(pid=17850): stdout: | (launched: 2022-12-08_21:50:15.828290) 21:50:20.748614 run osmo-hlr_10.42.42.2(pid=17850): stderr: | �[0;m�[1;31m20221208215016183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208215016183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208215016183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208215016183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208215016183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208215016183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208215016206 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208215016225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208215016226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208215016226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:50:20.791521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17843): Terminating (SIGTERM) 21:50:20.832041 run iperf3-srv_10.42.42.10(pid=17844): Terminating (SIGTERM) 21:50:20.872473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17845): Terminating (SIGTERM) 21:50:20.912684 run iperf3-srv_10.42.42.10(pid=17846): Terminating (SIGTERM) 21:50:20.953135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17849): Terminating (SIGTERM) 21:50:20.993600 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17852): Terminating (SIGTERM) 21:50:21.034182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17855): Terminating (SIGTERM) 21:50:21.043454 --- ParallelTerminationStrategy: PID 17843 died... 21:50:21.097810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17843): Terminated: ok {rc=0} 21:50:21.107517 --- ParallelTerminationStrategy: PID 17844 died... 21:50:21.161648 run iperf3-srv_10.42.42.10(pid=17844): Terminated {rc=256} 21:50:21.171298 --- ParallelTerminationStrategy: PID 17845 died... 21:50:21.226766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17845): Terminated: ok {rc=0} 21:50:21.236549 --- ParallelTerminationStrategy: PID 17846 died... 21:50:21.290848 run iperf3-srv_10.42.42.10(pid=17846): Terminated {rc=256} 21:50:21.300594 --- ParallelTerminationStrategy: PID 17849 died... 21:50:21.355259 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17849): Terminated: ok {rc=0} 21:50:21.365179 --- ParallelTerminationStrategy: PID 17852 died... 21:50:21.419354 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17852): Terminated: ok {rc=0} 21:50:21.429178 --- ParallelTerminationStrategy: PID 17855 died... 21:50:21.483275 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17855): Terminated: ok {rc=0} 21:50:21.568305 bus /gobi_0: Setting Powered False 21:50:22.676033 bus /gobi_0: Setting Powered False 21:50:23.789379 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17853): Process ended prematurely: osmo-stp_10.42.42.5(pid=17853) [trial-2350↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17853)]