Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19690): Process ended prematurely: osmo-stp_10.42.42.5(pid=19690) [trial-2350↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19690)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:08:42.804397 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:42.815590 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:08:42.981481 tst cs_paging_gprs_active.py: using LAC 17072 22:08:43.111029 tst cs_paging_gprs_active.py: using RAC 242 22:08:43.238641 tst cs_paging_gprs_active.py: using CellId 17072 22:08:43.373108 tst cs_paging_gprs_active.py: using BVCI 17073 22:08:43.398088 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.409293 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.420255 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.431307 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.442776 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.453914 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.464911 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.475879 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:43.487099 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:08:43.603240 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:08:43.880467 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:08:44.007660 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:08:44.321690 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19680): Launched 22:08:44.582996 run iperf3-srv_10.42.42.10(pid=19681): Launched 22:08:44.768695 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:08:44.895571 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:08:45.209657 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19682): Launched 22:08:45.470292 run iperf3-srv_10.42.42.10(pid=19683): Launched 22:08:45.655587 tst cs_paging_gprs_active.py:38: start network... 22:08:45.782487 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:08:46.297047 run create_hlr_db(pid=19684): Launched 22:08:46.523322 bus /gobi_6: Setting Powered False 22:08:47.513303 run create_hlr_db(pid=19684): Terminated: ok {rc=0} 22:08:47.947319 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19686): Launched 22:08:48.251527 run osmo-hlr_10.42.42.2(pid=19687): Launched 22:08:48.366590 run osmo-stp_10.42.42.5: Starting osmo-stp 22:08:48.903620 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19689): Launched 22:08:49.207945 run osmo-stp_10.42.42.5(pid=19690): Launched 22:08:49.319198 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:08:49.848144 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19692): Launched 22:08:49.957918 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:08:50.223971 run patchelf(pid=19693): Launched 22:08:50.402824 run osmo-stp_10.42.42.5(pid=19690): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19690)] 22:08:50.534086 run osmo-stp_10.42.42.5(pid=19690): stdout: | (launched: 2022-12-08_22:08:49.058399) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:08:50.665585 run osmo-stp_10.42.42.5(pid=19690): stderr: | �[0;m�[38;5;43m20221208220849227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220849227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220849228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220849228 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220849228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220849229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220849229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:08:50.792774 run osmo-stp_10.42.42.5(pid=19690): stdout: | (launched: 2022-12-08_22:08:49.058399) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:08:50.919297 run osmo-stp_10.42.42.5(pid=19690): stderr: | �[0;m�[38;5;43m20221208220849227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220849227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220849228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220849228 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220849228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220849229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220849229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:08:51.065827 run patchelf(pid=19693): Terminating (SIGINT) 22:08:51.237977 run patchelf(pid=19693): Terminated: ok {rc=0} 22:08:51.269714 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19690): Process ended prematurely: osmo-stp_10.42.42.5(pid=19690) [trial-2350↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19690)] [trial-2350↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:08:51.278985 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 22:08:51.341022 run osmo-hlr_10.42.42.2(pid=19687): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19687)] 22:08:51.391318 run osmo-hlr_10.42.42.2(pid=19687): stdout: | (launched: 2022-12-08_22:08:48.102570) 22:08:51.442551 run osmo-hlr_10.42.42.2(pid=19687): stderr: | �[0;m�[1;31m20221208220848276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220848276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220848276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220848277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220848277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220848277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220848289 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220848298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220848298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220848299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:08:51.485802 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19680): Terminating (SIGTERM) 22:08:51.527140 run iperf3-srv_10.42.42.10(pid=19681): Terminating (SIGTERM) 22:08:51.567800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19682): Terminating (SIGTERM) 22:08:51.608578 run iperf3-srv_10.42.42.10(pid=19683): Terminating (SIGTERM) 22:08:51.649417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19686): Terminating (SIGTERM) 22:08:51.690553 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19689): Terminating (SIGTERM) 22:08:51.731241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19692): Terminating (SIGTERM) 22:08:51.740926 --- ParallelTerminationStrategy: PID 19680 died... 22:08:51.795740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19680): Terminated: ok {rc=0} 22:08:51.805726 --- ParallelTerminationStrategy: PID 19681 died... 22:08:51.859761 run iperf3-srv_10.42.42.10(pid=19681): Terminated {rc=256} 22:08:51.869924 --- ParallelTerminationStrategy: PID 19682 died... 22:08:51.925064 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19682): Terminated: ok {rc=0} 22:08:51.934880 --- ParallelTerminationStrategy: PID 19683 died... 22:08:51.989103 run iperf3-srv_10.42.42.10(pid=19683): Terminated {rc=256} 22:08:51.999228 --- ParallelTerminationStrategy: PID 19686 died... 22:08:52.053300 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19686): Terminated: ok {rc=0} 22:08:52.063489 --- ParallelTerminationStrategy: PID 19689 died... 22:08:52.117721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19689): Terminated: ok {rc=0} 22:08:52.127879 --- ParallelTerminationStrategy: PID 19692 died... 22:08:52.183003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19692): Terminated: ok {rc=0} 22:08:52.271649 bus /gobi_0: Setting Powered False 22:08:53.375389 bus /gobi_0: Setting Powered False 22:08:54.482519 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19690): Process ended prematurely: osmo-stp_10.42.42.5(pid=19690) [trial-2350↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19690)]