Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=19838): Process ended prematurely: osmo-stp_10.42.42.5(pid=19838) [trial-2350↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19838)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:10:44.122587 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.134497 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:10:44.283649 tst cs_paging_gprs_active.py: using LAC 17082 22:10:44.411669 tst cs_paging_gprs_active.py: using RAC 252 22:10:44.539369 tst cs_paging_gprs_active.py: using CellId 17082 22:10:44.667059 tst cs_paging_gprs_active.py: using BVCI 17083 22:10:44.691937 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.703964 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.715454 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.727149 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.738793 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.750456 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.762499 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.774317 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:44.786226 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:10:44.903076 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:10:45.181145 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:10:45.308237 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:10:45.623612 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19828): Launched 22:10:45.888815 run iperf3-srv_10.42.42.10(pid=19829): Launched 22:10:46.078957 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:10:46.209384 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:10:46.547254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19830): Launched 22:10:46.830718 run iperf3-srv_10.42.42.10(pid=19831): Launched 22:10:47.020112 tst cs_paging_gprs_active.py:38: start network... 22:10:47.150230 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:10:47.631025 run create_hlr_db(pid=19832): Launched 22:10:47.806012 bus /gobi_6: Setting Powered False 22:10:48.827571 run create_hlr_db(pid=19832): Terminated: ok {rc=0} 22:10:49.231251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19834): Launched 22:10:49.535112 run osmo-hlr_10.42.42.2(pid=19835): Launched 22:10:49.660146 run osmo-stp_10.42.42.5: Starting osmo-stp 22:10:50.191866 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19837): Launched 22:10:50.494217 run osmo-stp_10.42.42.5(pid=19838): Launched 22:10:50.604905 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:10:51.133282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19840): Launched 22:10:51.241812 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:10:51.506728 run patchelf(pid=19841): Launched 22:10:51.685435 run osmo-stp_10.42.42.5(pid=19838): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19838)] 22:10:51.816237 run osmo-stp_10.42.42.5(pid=19838): stdout: | (launched: 2022-12-08_22:10:50.345930) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:51.947562 run osmo-stp_10.42.42.5(pid=19838): stderr: | �[0;m�[38;5;43m20221208221050514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221050514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221050515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221050515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221050515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221050515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221050516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:52.074380 run osmo-stp_10.42.42.5(pid=19838): stdout: | (launched: 2022-12-08_22:10:50.345930) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:52.200635 run osmo-stp_10.42.42.5(pid=19838): stderr: | �[0;m�[38;5;43m20221208221050514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221050514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221050515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221050515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221050515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221050515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221050516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:52.346207 run patchelf(pid=19841): Terminating (SIGINT) 22:10:52.517549 run patchelf(pid=19841): Terminated: ok {rc=0} 22:10:52.548854 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19838): Process ended prematurely: osmo-stp_10.42.42.5(pid=19838) [trial-2350↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19838)] [trial-2350↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:10:52.558230 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 22:10:52.620090 run osmo-hlr_10.42.42.2(pid=19835): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19835)] 22:10:52.670729 run osmo-hlr_10.42.42.2(pid=19835): stdout: | (launched: 2022-12-08_22:10:49.386225) 22:10:52.721797 run osmo-hlr_10.42.42.2(pid=19835): stderr: | �[0;m�[1;31m20221208221049562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208221049562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208221049562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208221049562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208221049562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208221049562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208221049574 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208221049582 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208221049583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208221049583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:10:52.765033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19828): Terminating (SIGTERM) 22:10:52.805712 run iperf3-srv_10.42.42.10(pid=19829): Terminating (SIGTERM) 22:10:52.846527 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19830): Terminating (SIGTERM) 22:10:52.887312 run iperf3-srv_10.42.42.10(pid=19831): Terminating (SIGTERM) 22:10:52.928045 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19834): Terminating (SIGTERM) 22:10:52.968394 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19837): Terminating (SIGTERM) 22:10:53.008801 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19840): Terminating (SIGTERM) 22:10:53.018362 --- ParallelTerminationStrategy: PID 19828 died... 22:10:53.072382 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19828): Terminated: ok {rc=0} 22:10:53.082397 --- ParallelTerminationStrategy: PID 19829 died... 22:10:53.136455 run iperf3-srv_10.42.42.10(pid=19829): Terminated {rc=256} 22:10:53.146359 --- ParallelTerminationStrategy: PID 19830 died... 22:10:53.200195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19830): Terminated: ok {rc=0} 22:10:53.210055 --- ParallelTerminationStrategy: PID 19831 died... 22:10:53.264518 run iperf3-srv_10.42.42.10(pid=19831): Terminated {rc=256} 22:10:53.274236 --- ParallelTerminationStrategy: PID 19834 died... 22:10:53.328639 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19834): Terminated: ok {rc=0} 22:10:53.338432 --- ParallelTerminationStrategy: PID 19837 died... 22:10:53.392702 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19837): Terminated: ok {rc=0} 22:10:53.402667 --- ParallelTerminationStrategy: PID 19840 died... 22:10:53.457139 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19840): Terminated: ok {rc=0} 22:10:53.547083 bus /gobi_0: Setting Powered False 22:10:54.651086 bus /gobi_0: Setting Powered False 22:10:55.758632 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19838): Process ended prematurely: osmo-stp_10.42.42.5(pid=19838) [trial-2350↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19838)]