Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=19279): Process ended prematurely: osmo-stp_10.42.42.5(pid=19279) [trial-2350↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19279)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 22:06:41.149972 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.160835 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 22:06:41.306017 tst cs_paging_gprs_active.py: using LAC 17062 22:06:41.435221 tst cs_paging_gprs_active.py: using RAC 232 22:06:41.565328 tst cs_paging_gprs_active.py: using CellId 17062 22:06:41.699381 tst cs_paging_gprs_active.py: using BVCI 17063 22:06:41.724269 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.735259 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.746108 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.756793 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.767421 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.778048 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.788807 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.799465 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:41.810312 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:06:41.926787 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:06:42.203939 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:06:42.330615 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:06:42.644474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19269): Launched 22:06:42.905191 run iperf3-srv_10.42.42.10(pid=19270): Launched 22:06:43.090179 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:06:43.217099 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:06:43.531462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19271): Launched 22:06:43.793387 run iperf3-srv_10.42.42.10(pid=19272): Launched 22:06:43.978799 tst cs_paging_gprs_active.py:38: start network... 22:06:44.105815 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:06:44.583539 run create_hlr_db(pid=19273): Launched 22:06:44.759192 bus /sierra_2: Setting Powered False 22:06:45.781115 run create_hlr_db(pid=19273): Terminated: ok {rc=0} 22:06:46.243847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19275): Launched 22:06:46.750333 run osmo-hlr_10.42.42.2(pid=19276): Launched 22:06:47.079306 run osmo-stp_10.42.42.5: Starting osmo-stp 22:06:47.661016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19278): Launched 22:06:47.983448 run osmo-stp_10.42.42.5(pid=19279): Launched 22:06:48.101097 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:06:48.666613 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19281): Launched 22:06:48.782474 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:06:49.064020 run patchelf(pid=19282): Launched 22:06:49.254993 run osmo-stp_10.42.42.5(pid=19279): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19279)] 22:06:49.394578 run osmo-stp_10.42.42.5(pid=19279): stdout: | (launched: 2022-12-08_22:06:47.826424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:06:49.533728 run osmo-stp_10.42.42.5(pid=19279): stderr: | �[0;m�[38;5;43m20221208220648019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220648019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220648019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220648020 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220648020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220648020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220648020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:06:49.669756 run osmo-stp_10.42.42.5(pid=19279): stdout: | (launched: 2022-12-08_22:06:47.826424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:06:49.803828 run osmo-stp_10.42.42.5(pid=19279): stderr: | �[0;m�[38;5;43m20221208220648019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220648019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220648019 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220648020 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220648020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220648020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220648020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:06:49.959055 run patchelf(pid=19282): Terminating (SIGINT) 22:06:50.140616 run patchelf(pid=19282): Terminated: ok {rc=0} 22:06:50.174230 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19279): Process ended prematurely: osmo-stp_10.42.42.5(pid=19279) [trial-2350↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19279)] [trial-2350↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 22:06:50.184451 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 22:06:50.248271 run osmo-hlr_10.42.42.2(pid=19276): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19276)] 22:06:50.300843 run osmo-hlr_10.42.42.2(pid=19276): stdout: | (launched: 2022-12-08_22:06:46.413879) 22:06:50.353489 run osmo-hlr_10.42.42.2(pid=19276): stderr: | �[0;m�[1;31m20221208220646798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220646798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220646798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220646798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220646798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220646798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220646817 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220646833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220646834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220646834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:06:50.398705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19269): Terminating (SIGTERM) 22:06:50.441205 run iperf3-srv_10.42.42.10(pid=19270): Terminating (SIGTERM) 22:06:50.483926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19271): Terminating (SIGTERM) 22:06:50.526659 run iperf3-srv_10.42.42.10(pid=19272): Terminating (SIGTERM) 22:06:50.569197 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19275): Terminating (SIGTERM) 22:06:50.612179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19278): Terminating (SIGTERM) 22:06:50.654951 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19281): Terminating (SIGTERM) 22:06:50.664694 --- ParallelTerminationStrategy: PID 19269 died... 22:06:50.722125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19269): Terminated: ok {rc=0} 22:06:50.732450 --- ParallelTerminationStrategy: PID 19270 died... 22:06:50.788900 run iperf3-srv_10.42.42.10(pid=19270): Terminated {rc=256} 22:06:50.799148 --- ParallelTerminationStrategy: PID 19271 died... 22:06:50.855564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19271): Terminated: ok {rc=0} 22:06:50.865835 --- ParallelTerminationStrategy: PID 19272 died... 22:06:50.922250 run iperf3-srv_10.42.42.10(pid=19272): Terminated {rc=256} 22:06:50.932490 --- ParallelTerminationStrategy: PID 19275 died... 22:06:50.988770 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19275): Terminated: ok {rc=0} 22:06:50.999055 --- ParallelTerminationStrategy: PID 19278 died... 22:06:51.055590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19278): Terminated: ok {rc=0} 22:06:51.065983 --- ParallelTerminationStrategy: PID 19281 died... 22:06:51.122940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19281): Terminated: ok {rc=0} 22:06:51.211682 bus /gobi_0: Setting Powered False 22:06:52.320245 bus /gobi_0: Setting Powered False 22:06:53.430321 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19279): Process ended prematurely: osmo-stp_10.42.42.5(pid=19279) [trial-2350↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19279)]