Failed
gprs:trx-lms+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22368): Process ended prematurely: osmo-stp_10.42.42.5(pid=22368) [trial-2350↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22368)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-lms+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 22:35:33.495670 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:33.507245 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:35:33.672032 tst ping_idle_ping.py: using LAC 17214 22:35:33.791442 tst ping_idle_ping.py: using RAC 129 22:35:33.908135 tst ping_idle_ping.py: using CellId 17214 22:35:34.030117 tst ping_idle_ping.py: using BVCI 17215 22:35:34.054637 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.066137 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.077273 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.088575 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.099918 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.111190 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.122473 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:35:34.133626 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:35:34.421163 tst ping_idle_ping.py:24: start network... 22:35:34.554650 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:35:35.067310 run create_hlr_db(pid=22362): Launched 22:35:35.252743 bus /gobi_6: Setting Powered False 22:35:36.274172 run create_hlr_db(pid=22362): Terminated: ok {rc=0} 22:35:36.674848 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22364): Launched 22:35:36.972540 run osmo-hlr_10.42.42.2(pid=22365): Launched 22:35:37.090028 run osmo-stp_10.42.42.5: Starting osmo-stp 22:35:37.614775 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22367): Launched 22:35:37.912622 run osmo-stp_10.42.42.5(pid=22368): Launched 22:35:38.022152 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:35:38.542591 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22370): Launched 22:35:38.649140 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:35:38.910637 run patchelf(pid=22371): Launched 22:35:39.087623 run osmo-stp_10.42.42.5(pid=22368): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22368)] 22:35:39.216753 run osmo-stp_10.42.42.5(pid=22368): stdout: | (launched: 2022-12-08_22:35:37.765895) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:35:39.346724 run osmo-stp_10.42.42.5(pid=22368): stderr: | �[0;m�[38;5;43m20221208223537935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208223537935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208223537936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208223537936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208223537937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208223537937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208223537937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:35:39.471643 run osmo-stp_10.42.42.5(pid=22368): stdout: | (launched: 2022-12-08_22:35:37.765895) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:35:39.595584 run osmo-stp_10.42.42.5(pid=22368): stderr: | �[0;m�[38;5;43m20221208223537935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208223537935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208223537936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208223537936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208223537937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208223537937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208223537937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:35:39.739463 run patchelf(pid=22371): Terminating (SIGINT) 22:35:39.909167 run patchelf(pid=22371): Terminated: ok {rc=0} 22:35:39.939801 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=22368): Process ended prematurely: osmo-stp_10.42.42.5(pid=22368) [trial-2350↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22368)] [trial-2350↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 22:35:39.948581 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 22:35:40.010689 run osmo-hlr_10.42.42.2(pid=22365): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22365)] 22:35:40.061218 run osmo-hlr_10.42.42.2(pid=22365): stdout: | (launched: 2022-12-08_22:35:36.825988) 22:35:40.112589 run osmo-hlr_10.42.42.2(pid=22365): stderr: | �[0;m�[1;31m20221208223537001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208223537001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208223537001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208223537001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208223537001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208223537001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208223537013 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-lms+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208223537022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208223537022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208223537022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:35:40.155987 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22364): Terminating (SIGTERM) 22:35:40.196992 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22367): Terminating (SIGTERM) 22:35:40.238224 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22370): Terminating (SIGTERM) 22:35:40.247845 --- ParallelTerminationStrategy: PID 22364 died... 22:35:40.303206 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22364): Terminated: ok {rc=0} 22:35:40.313342 --- ParallelTerminationStrategy: PID 22367 died... 22:35:40.368363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22367): Terminated: ok {rc=0} 22:35:40.378752 --- ParallelTerminationStrategy: PID 22370 died... 22:35:40.433379 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22370): Terminated: ok {rc=0} 22:35:40.522425 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22368): Process ended prematurely: osmo-stp_10.42.42.5(pid=22368) [trial-2350↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22368)]