Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21769): Process ended prematurely: osmo-stp_10.42.42.5(pid=21769) [trial-2350↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21769)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:26:52.637398 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:52.648503 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:26:52.814088 tst cs_paging_gprs_active.py: using LAC 17168 22:26:52.944830 tst cs_paging_gprs_active.py: using RAC 83 22:26:53.065759 tst cs_paging_gprs_active.py: using CellId 17168 22:26:53.184102 tst cs_paging_gprs_active.py: using BVCI 17169 22:26:53.207857 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.218608 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.229602 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.241068 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.252107 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.263107 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.274248 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.285321 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.296427 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:26:53.416059 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:26:53.712304 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:26:53.846305 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:26:54.178571 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21759): Launched 22:26:54.455689 run iperf3-srv_10.42.42.10(pid=21760): Launched 22:26:54.652475 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:26:54.787628 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:26:55.120131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21761): Launched 22:26:55.397504 run iperf3-srv_10.42.42.10(pid=21762): Launched 22:26:55.594608 tst cs_paging_gprs_active.py:38: start network... 22:26:55.728934 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:26:56.245013 run create_hlr_db(pid=21763): Launched 22:26:56.430788 bus /gobi_6: Setting Powered False 22:26:57.453664 run create_hlr_db(pid=21763): Terminated: ok {rc=0} 22:26:57.856441 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21765): Launched 22:26:58.157518 run osmo-hlr_10.42.42.2(pid=21766): Launched 22:26:58.276918 run osmo-stp_10.42.42.5: Starting osmo-stp 22:26:58.806318 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21768): Launched 22:26:59.106866 run osmo-stp_10.42.42.5(pid=21769): Launched 22:26:59.217347 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:26:59.741411 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21771): Launched 22:26:59.849128 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:27:00.112680 run patchelf(pid=21772): Launched 22:27:00.289292 run osmo-stp_10.42.42.5(pid=21769): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21769)] 22:27:00.418860 run osmo-stp_10.42.42.5(pid=21769): stdout: | (launched: 2022-12-08_22:26:58.959143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:27:00.548356 run osmo-stp_10.42.42.5(pid=21769): stderr: | �[0;m�[38;5;43m20221208222659130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208222659130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208222659130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208222659131 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208222659131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208222659131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208222659131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:27:00.674113 run osmo-stp_10.42.42.5(pid=21769): stdout: | (launched: 2022-12-08_22:26:58.959143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:27:00.799402 run osmo-stp_10.42.42.5(pid=21769): stderr: | �[0;m�[38;5;43m20221208222659130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208222659130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208222659130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208222659131 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208222659131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208222659131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208222659131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:27:00.947636 run patchelf(pid=21772): Terminating (SIGINT) 22:27:01.121266 run patchelf(pid=21772): Terminated: ok {rc=0} 22:27:01.153927 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21769): Process ended prematurely: osmo-stp_10.42.42.5(pid=21769) [trial-2350↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21769)] [trial-2350↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:27:01.164379 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:27:01.229404 run osmo-hlr_10.42.42.2(pid=21766): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21766)] 22:27:01.281911 run osmo-hlr_10.42.42.2(pid=21766): stdout: | (launched: 2022-12-08_22:26:58.010068) 22:27:01.335335 run osmo-hlr_10.42.42.2(pid=21766): stderr: | �[0;m�[1;31m20221208222658186 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208222658186 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208222658186 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208222658187 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208222658187 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208222658187 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208222658199 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208222658209 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208222658210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208222658210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:27:01.379554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21759): Terminating (SIGTERM) 22:27:01.424550 run iperf3-srv_10.42.42.10(pid=21760): Terminating (SIGTERM) 22:27:01.469370 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21761): Terminating (SIGTERM) 22:27:01.514349 run iperf3-srv_10.42.42.10(pid=21762): Terminating (SIGTERM) 22:27:01.559724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21765): Terminating (SIGTERM) 22:27:01.606021 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21768): Terminating (SIGTERM) 22:27:01.648067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21771): Terminating (SIGTERM) 22:27:01.658988 --- ParallelTerminationStrategy: PID 21759 died... 22:27:01.716406 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21759): Terminated: ok {rc=0} 22:27:01.727033 --- ParallelTerminationStrategy: PID 21760 died... 22:27:01.784272 run iperf3-srv_10.42.42.10(pid=21760): Terminated {rc=256} 22:27:01.794998 --- ParallelTerminationStrategy: PID 21761 died... 22:27:01.852830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21761): Terminated: ok {rc=0} 22:27:01.863539 --- ParallelTerminationStrategy: PID 21762 died... 22:27:01.921159 run iperf3-srv_10.42.42.10(pid=21762): Terminated {rc=256} 22:27:01.931822 --- ParallelTerminationStrategy: PID 21765 died... 22:27:01.988053 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21765): Terminated: ok {rc=0} 22:27:01.999755 --- ParallelTerminationStrategy: PID 21768 died... 22:27:02.055877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21768): Terminated: ok {rc=0} 22:27:02.067490 --- ParallelTerminationStrategy: PID 21771 died... 22:27:02.123811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21771): Terminated: ok {rc=0} 22:27:02.210827 bus /gobi_0: Setting Powered False 22:27:03.315205 bus /gobi_0: Setting Powered False 22:27:04.427360 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21769): Process ended prematurely: osmo-stp_10.42.42.5(pid=21769) [trial-2350↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21769)]