Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=21837): Process ended prematurely: osmo-stp_10.42.42.5(pid=21837) [trial-2350↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21837)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:27:51.792356 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:51.803527 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:27:51.950239 tst cs_paging_gprs_active.py: using LAC 17173 22:27:52.076208 tst cs_paging_gprs_active.py: using RAC 88 22:27:52.202101 tst cs_paging_gprs_active.py: using CellId 17173 22:27:52.334025 tst cs_paging_gprs_active.py: using BVCI 17174 22:27:52.358946 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.370591 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.382047 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.393548 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.404848 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.416186 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.427693 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.439020 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:52.450765 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:27:52.566690 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:27:52.858702 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:27:52.993023 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:27:53.324943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21827): Launched 22:27:53.600223 run iperf3-srv_10.42.42.10(pid=21828): Launched 22:27:53.796942 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:27:53.930939 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:27:54.262534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21829): Launched 22:27:54.538976 run iperf3-srv_10.42.42.10(pid=21830): Launched 22:27:54.735881 tst cs_paging_gprs_active.py:38: start network... 22:27:54.870384 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:27:55.386418 run create_hlr_db(pid=21831): Launched 22:27:55.573275 bus /gobi_6: Setting Powered False 22:27:56.595616 run create_hlr_db(pid=21831): Terminated: ok {rc=0} 22:27:57.002820 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21833): Launched 22:27:57.306422 run osmo-hlr_10.42.42.2(pid=21834): Launched 22:27:57.419007 run osmo-stp_10.42.42.5: Starting osmo-stp 22:27:57.947871 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21836): Launched 22:27:58.267837 run osmo-stp_10.42.42.5(pid=21837): Launched 22:27:58.385245 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:27:58.944501 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21839): Launched 22:27:59.059296 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:27:59.339776 run patchelf(pid=21840): Launched 22:27:59.527458 run osmo-stp_10.42.42.5(pid=21837): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21837)] 22:27:59.665072 run osmo-stp_10.42.42.5(pid=21837): stdout: | (launched: 2022-12-08_22:27:58.111406) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:27:59.802760 run osmo-stp_10.42.42.5(pid=21837): stderr: | �[0;m�[38;5;43m20221208222758304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208222758304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208222758304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208222758305 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208222758305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208222758305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208222758306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:27:59.936256 run osmo-stp_10.42.42.5(pid=21837): stdout: | (launched: 2022-12-08_22:27:58.111406) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:28:00.068681 run osmo-stp_10.42.42.5(pid=21837): stderr: | �[0;m�[38;5;43m20221208222758304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208222758304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208222758304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208222758305 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208222758305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208222758305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208222758306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:28:00.222170 run patchelf(pid=21840): Terminating (SIGINT) 22:28:00.402660 run patchelf(pid=21840): Terminated: ok {rc=0} 22:28:00.435785 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21837): Process ended prematurely: osmo-stp_10.42.42.5(pid=21837) [trial-2350↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21837)] [trial-2350↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:28:00.445890 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:28:00.509443 run osmo-hlr_10.42.42.2(pid=21834): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21834)] 22:28:00.561559 run osmo-hlr_10.42.42.2(pid=21834): stdout: | (launched: 2022-12-08_22:27:57.157587) 22:28:00.614431 run osmo-hlr_10.42.42.2(pid=21834): stderr: | �[0;m�[1;31m20221208222757333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208222757334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208222757334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208222757334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208222757334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208222757334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208222757346 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208222757354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208222757354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208222757354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:28:00.659181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21827): Terminating (SIGTERM) 22:28:00.702647 run iperf3-srv_10.42.42.10(pid=21828): Terminating (SIGTERM) 22:28:00.745036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21829): Terminating (SIGTERM) 22:28:00.787146 run iperf3-srv_10.42.42.10(pid=21830): Terminating (SIGTERM) 22:28:00.829395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21833): Terminating (SIGTERM) 22:28:00.884402 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21836): Terminating (SIGTERM) 22:28:00.952433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21839): Terminating (SIGTERM) 22:28:00.965976 --- ParallelTerminationStrategy: PID 21827 died... 22:28:01.039963 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21827): Terminated: ok {rc=0} 22:28:01.051635 --- ParallelTerminationStrategy: PID 21828 died... 22:28:01.109379 run iperf3-srv_10.42.42.10(pid=21828): Terminated {rc=256} 22:28:01.120044 --- ParallelTerminationStrategy: PID 21829 died... 22:28:01.178937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21829): Terminated: ok {rc=0} 22:28:01.189754 --- ParallelTerminationStrategy: PID 21830 died... 22:28:01.247656 run iperf3-srv_10.42.42.10(pid=21830): Terminated {rc=256} 22:28:01.259293 --- ParallelTerminationStrategy: PID 21833 died... 22:28:01.316732 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21833): Terminated: ok {rc=0} 22:28:01.328588 --- ParallelTerminationStrategy: PID 21836 died... 22:28:01.387299 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21836): Terminated: ok {rc=0} 22:28:01.398011 --- ParallelTerminationStrategy: PID 21839 died... 22:28:01.457007 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21839): Terminated: ok {rc=0} 22:28:01.548807 bus /gobi_0: Setting Powered False 22:28:02.652205 bus /gobi_0: Setting Powered False 22:28:03.763614 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21837): Process ended prematurely: osmo-stp_10.42.42.5(pid=21837) [trial-2350↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21837)]