Failed
dynts:sysmo+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_sysmo+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27214): Process ended prematurely: osmo-stp_10.42.42.5(pid=27214) [trial-2351↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27214)]
Standard Output
---------------------------------------------- trial-2351 dynts:sysmo+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 23:21:49.547059 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:49.558378 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 23:21:49.703366 tst switch_tch_pdch.py: using LAC 17456 23:21:49.830771 tst switch_tch_pdch.py: using RAC 116 23:21:49.965616 tst switch_tch_pdch.py: using CellId 17456 23:21:50.086711 tst switch_tch_pdch.py: using BVCI 17457 23:21:50.110074 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.120895 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.131676 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.142668 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.153631 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.164535 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.176032 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:50.187125 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 23:21:50.302168 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 23:21:50.583934 tst switch_tch_pdch.py:51: start network... 23:21:50.712563 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:21:51.173255 run create_hlr_db(pid=27208): Launched 23:21:51.298775 bus /gobi_6: Setting Powered False 23:21:52.372106 run create_hlr_db(pid=27208): Terminated: ok {rc=0} 23:21:52.783104 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27210): Launched 23:21:53.115763 run osmo-hlr_10.42.42.2(pid=27211): Launched 23:21:53.236127 run osmo-stp_10.42.42.5: Starting osmo-stp 23:21:53.781108 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27213): Launched 23:21:54.113111 run osmo-stp_10.42.42.5(pid=27214): Launched 23:21:54.232872 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:21:54.782216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27216): Launched 23:21:54.900375 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:21:55.190242 run patchelf(pid=27217): Launched 23:21:55.383407 run osmo-stp_10.42.42.5(pid=27214): ERR: Terminated: ERROR {rc=1} [trial-2351↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27214)] 23:21:55.524313 run osmo-stp_10.42.42.5(pid=27214): stdout: | (launched: 2022-12-08_23:21:53.949540) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:21:55.665793 run osmo-stp_10.42.42.5(pid=27214): stderr: | �[0;m�[38;5;43m20221208232154144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232154144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232154144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232154145 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232154145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232154145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232154146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:21:55.801923 run osmo-stp_10.42.42.5(pid=27214): stdout: | (launched: 2022-12-08_23:21:53.949540) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:21:55.937901 run osmo-stp_10.42.42.5(pid=27214): stderr: | �[0;m�[38;5;43m20221208232154144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232154144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232154144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232154145 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232154145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232154145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232154146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:21:56.095064 run patchelf(pid=27217): Terminating (SIGINT) 23:21:56.279546 run patchelf(pid=27217): Terminated: ok {rc=0} 23:21:56.313222 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=27214): Process ended prematurely: osmo-stp_10.42.42.5(pid=27214) [trial-2351↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27214)] [trial-2351↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 23:21:56.322939 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 23:21:56.385544 run osmo-hlr_10.42.42.2(pid=27211): ERR: Terminated: ERROR {rc=237} [trial-2351↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27211)] 23:21:56.436871 run osmo-hlr_10.42.42.2(pid=27211): stdout: | (launched: 2022-12-08_23:21:52.952298) 23:21:56.488885 run osmo-hlr_10.42.42.2(pid=27211): stderr: | �[0;m�[1;31m20221208232153153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208232153153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208232153153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208232153153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208232153153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208232153153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208232153165 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/dynts:sysmo+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208232153174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208232153174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208232153174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:21:56.533671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27210): Terminating (SIGTERM) 23:21:56.575817 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27213): Terminating (SIGTERM) 23:21:56.617910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27216): Terminating (SIGTERM) 23:21:56.627734 --- ParallelTerminationStrategy: PID 27210 died... 23:21:56.683829 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27210): Terminated: ok {rc=0} 23:21:56.693945 --- ParallelTerminationStrategy: PID 27213 died... 23:21:56.749693 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27213): Terminated: ok {rc=0} 23:21:56.759912 --- ParallelTerminationStrategy: PID 27216 died... 23:21:56.815889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27216): Terminated: ok {rc=0} 23:21:56.903312 bus /gobi_0: Setting Powered False 23:21:58.010600 bus /gobi_0: Setting Powered False 23:21:59.118511 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27214): Process ended prematurely: osmo-stp_10.42.42.5(pid=27214) [trial-2351↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27214)]