Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=32626): Process ended prematurely: osmo-stp_10.42.42.5(pid=32626) [trial-2351↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32626)]
Standard Output
---------------------------------------------- trial-2351 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 00:15:00.583495 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:00.594154 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 00:15:00.724374 tst cs_paging_gprs_active.py: using LAC 17741 00:15:00.848328 tst cs_paging_gprs_active.py: using RAC 146 00:15:00.983441 tst cs_paging_gprs_active.py: using CellId 17741 00:15:01.103991 tst cs_paging_gprs_active.py: using BVCI 17742 00:15:01.128079 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.139729 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.150754 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.161872 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.173126 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.183938 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.196038 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.207153 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:01.221958 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 00:15:01.363150 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 00:15:01.656849 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:15:01.786301 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:15:02.122721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32616): Launched 00:15:02.448289 run iperf3-srv_10.42.42.10(pid=32617): Launched 00:15:02.635527 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:15:02.762119 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:15:03.077069 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32618): Launched 00:15:03.337802 run iperf3-srv_10.42.42.10(pid=32619): Launched 00:15:03.523574 tst cs_paging_gprs_active.py:38: start network... 00:15:03.650384 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:15:04.137463 run create_hlr_db(pid=32620): Launched 00:15:04.313178 bus /sierra_2: Setting Powered False 00:15:05.334344 run create_hlr_db(pid=32620): Terminated: ok {rc=0} 00:15:05.763423 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32622): Launched 00:15:06.087177 run osmo-hlr_10.42.42.2(pid=32623): Launched 00:15:06.210180 run osmo-stp_10.42.42.5: Starting osmo-stp 00:15:06.771645 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32625): Launched 00:15:07.094467 run osmo-stp_10.42.42.5(pid=32626): Launched 00:15:07.216228 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:15:07.781791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32628): Launched 00:15:07.897709 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:15:08.179844 run patchelf(pid=32629): Launched 00:15:08.369482 run osmo-stp_10.42.42.5(pid=32626): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32626)] 00:15:08.508373 run osmo-stp_10.42.42.5(pid=32626): stdout: | (launched: 2022-12-09_00:15:06.935980) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:08.646796 run osmo-stp_10.42.42.5(pid=32626): stderr: | �[0;m�[38;5;43m20221209001507128 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209001507128 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209001507129 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209001507129 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209001507130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209001507130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209001507130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:08.780755 run osmo-stp_10.42.42.5(pid=32626): stdout: | (launched: 2022-12-09_00:15:06.935980) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:08.913818 run osmo-stp_10.42.42.5(pid=32626): stderr: | �[0;m�[38;5;43m20221209001507128 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209001507128 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209001507129 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209001507129 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209001507130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209001507130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209001507130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:09.068554 run patchelf(pid=32629): Terminating (SIGINT) 00:15:09.250326 run patchelf(pid=32629): Terminated: ok {rc=0} 00:15:09.283657 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32626): Process ended prematurely: osmo-stp_10.42.42.5(pid=32626) [trial-2351↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32626)] [trial-2351↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 00:15:09.293669 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:15:09.355887 run osmo-hlr_10.42.42.2(pid=32623): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32623)] 00:15:09.406990 run osmo-hlr_10.42.42.2(pid=32623): stdout: | (launched: 2022-12-09_00:15:05.927706) 00:15:09.458627 run osmo-hlr_10.42.42.2(pid=32623): stderr: | �[0;m�[1;31m20221209001506124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209001506124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209001506124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209001506124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209001506124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209001506124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209001506136 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209001506144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209001506145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209001506145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:15:09.502983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32616): Terminating (SIGTERM) 00:15:09.544270 run iperf3-srv_10.42.42.10(pid=32617): Terminating (SIGTERM) 00:15:09.586349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32618): Terminating (SIGTERM) 00:15:09.627905 run iperf3-srv_10.42.42.10(pid=32619): Terminating (SIGTERM) 00:15:09.669663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32622): Terminating (SIGTERM) 00:15:09.711283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32625): Terminating (SIGTERM) 00:15:09.752837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32628): Terminating (SIGTERM) 00:15:09.762757 --- ParallelTerminationStrategy: PID 32616 died... 00:15:09.818182 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32616): Terminated: ok {rc=0} 00:15:09.828559 --- ParallelTerminationStrategy: PID 32617 died... 00:15:09.883296 run iperf3-srv_10.42.42.10(pid=32617): Terminated {rc=256} 00:15:09.893474 --- ParallelTerminationStrategy: PID 32618 died... 00:15:09.948178 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32618): Terminated: ok {rc=0} 00:15:09.958324 --- ParallelTerminationStrategy: PID 32619 died... 00:15:10.013246 run iperf3-srv_10.42.42.10(pid=32619): Terminated {rc=256} 00:15:10.023245 --- ParallelTerminationStrategy: PID 32622 died... 00:15:10.078067 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32622): Terminated: ok {rc=0} 00:15:10.088471 --- ParallelTerminationStrategy: PID 32625 died... 00:15:10.142964 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32625): Terminated: ok {rc=0} 00:15:10.152741 --- ParallelTerminationStrategy: PID 32628 died... 00:15:10.207910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32628): Terminated: ok {rc=0} 00:15:10.293590 bus /gobi_0: Setting Powered False 00:15:11.393857 bus /gobi_0: Setting Powered False 00:15:12.497742 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32626): Process ended prematurely: osmo-stp_10.42.42.5(pid=32626) [trial-2351↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32626)]