Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=1112): Process ended prematurely: osmo-stp_10.42.42.5(pid=1112) [trial-2351↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1112)]
Standard Output
---------------------------------------------- trial-2351 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 00:24:15.603845 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:15.614974 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:24:15.757313 tst cs_paging_gprs_active.py: using LAC 17789 00:24:15.891010 tst cs_paging_gprs_active.py: using RAC 194 00:24:16.031797 tst cs_paging_gprs_active.py: using CellId 17789 00:24:16.165144 tst cs_paging_gprs_active.py: using BVCI 17790 00:24:16.196926 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.212579 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.229077 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.244637 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.261238 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.275336 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.289399 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.301902 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:16.315469 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:24:16.440836 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:24:16.742706 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:24:16.875225 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:24:17.212504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1102): Launched 00:24:17.473870 run iperf3-srv_10.42.42.10(pid=1103): Launched 00:24:17.658330 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:24:17.783735 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:24:18.095609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1104): Launched 00:24:18.354167 run iperf3-srv_10.42.42.10(pid=1105): Launched 00:24:18.538902 tst cs_paging_gprs_active.py:38: start network... 00:24:18.665194 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:24:19.152020 run create_hlr_db(pid=1106): Launched 00:24:19.326590 bus /gobi_6: Setting Powered False 00:24:20.348295 run create_hlr_db(pid=1106): Terminated: ok {rc=0} 00:24:20.775237 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1108): Launched 00:24:21.096185 run osmo-hlr_10.42.42.2(pid=1109): Launched 00:24:21.213775 run osmo-stp_10.42.42.5: Starting osmo-stp 00:24:21.771928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1111): Launched 00:24:22.093297 run osmo-stp_10.42.42.5(pid=1112): Launched 00:24:22.210022 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:24:22.770395 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1115): Launched 00:24:22.885457 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:24:23.165358 run patchelf(pid=1116): Launched 00:24:23.353312 run osmo-stp_10.42.42.5(pid=1112): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1112)] 00:24:23.490433 run osmo-stp_10.42.42.5(pid=1112): stdout: | (launched: 2022-12-09_00:24:21.935694) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:23.627797 run osmo-stp_10.42.42.5(pid=1112): stderr: | �[0;m�[38;5;43m20221209002422127 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209002422127 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209002422127 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209002422128 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209002422128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209002422128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209002422128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:23.761535 run osmo-stp_10.42.42.5(pid=1112): stdout: | (launched: 2022-12-09_00:24:21.935694) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:23.893648 run osmo-stp_10.42.42.5(pid=1112): stderr: | �[0;m�[38;5;43m20221209002422127 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209002422127 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209002422127 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209002422128 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209002422128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209002422128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209002422128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:24.046686 run patchelf(pid=1116): Terminating (SIGINT) 00:24:24.226789 run patchelf(pid=1116): Terminated: ok {rc=0} 00:24:24.259934 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1112): Process ended prematurely: osmo-stp_10.42.42.5(pid=1112) [trial-2351↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1112)] [trial-2351↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 00:24:24.269890 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:24:24.332617 run osmo-hlr_10.42.42.2(pid=1109): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1109)] 00:24:24.384320 run osmo-hlr_10.42.42.2(pid=1109): stdout: | (launched: 2022-12-09_00:24:20.938643) 00:24:24.436108 run osmo-hlr_10.42.42.2(pid=1109): stderr: | �[0;m�[1;31m20221209002421138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209002421138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209002421138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209002421138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209002421138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209002421138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209002421150 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209002421158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209002421158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209002421158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:24:24.480009 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1102): Terminating (SIGTERM) 00:24:24.521743 run iperf3-srv_10.42.42.10(pid=1103): Terminating (SIGTERM) 00:24:24.563516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1104): Terminating (SIGTERM) 00:24:24.605528 run iperf3-srv_10.42.42.10(pid=1105): Terminating (SIGTERM) 00:24:24.647349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1108): Terminating (SIGTERM) 00:24:24.689381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1111): Terminating (SIGTERM) 00:24:24.731305 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1115): Terminating (SIGTERM) 00:24:24.741206 --- ParallelTerminationStrategy: PID 1102 died... 00:24:24.796593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1102): Terminated: ok {rc=0} 00:24:24.806673 --- ParallelTerminationStrategy: PID 1103 died... 00:24:24.861941 run iperf3-srv_10.42.42.10(pid=1103): Terminated {rc=256} 00:24:24.871800 --- ParallelTerminationStrategy: PID 1104 died... 00:24:24.926481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1104): Terminated: ok {rc=0} 00:24:24.936589 --- ParallelTerminationStrategy: PID 1105 died... 00:24:24.991281 run iperf3-srv_10.42.42.10(pid=1105): Terminated {rc=256} 00:24:25.001534 --- ParallelTerminationStrategy: PID 1108 died... 00:24:25.056361 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1108): Terminated: ok {rc=0} 00:24:25.066273 --- ParallelTerminationStrategy: PID 1111 died... 00:24:25.121316 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1111): Terminated: ok {rc=0} 00:24:25.131496 --- ParallelTerminationStrategy: PID 1115 died... 00:24:25.186737 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1115): Terminated: ok {rc=0} 00:24:25.271568 bus /gobi_0: Setting Powered False 00:24:26.376426 bus /gobi_0: Setting Powered False 00:24:27.481244 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1112): Process ended prematurely: osmo-stp_10.42.42.5(pid=1112) [trial-2351↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1112)]