Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26466): Process ended prematurely: osmo-stp_10.42.42.5(pid=26466) [trial-2351↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26466)]
Standard Output
---------------------------------------------- trial-2351 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:18:34.792252 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:34.803506 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:18:34.938401 tst cs_paging_gprs_active.py: using LAC 17440 23:18:35.069921 tst cs_paging_gprs_active.py: using RAC 100 23:18:35.203298 tst cs_paging_gprs_active.py: using CellId 17440 23:18:35.330880 tst cs_paging_gprs_active.py: using BVCI 17441 23:18:35.355725 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.366944 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.377668 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.389085 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.400064 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.411162 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.422344 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.433533 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:35.444592 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:18:35.565899 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:18:35.869909 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:18:36.010603 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:36.359839 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26456): Launched 23:18:36.650532 run iperf3-srv_10.42.42.10(pid=26457): Launched 23:18:36.858297 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:18:36.998828 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:37.348009 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26458): Launched 23:18:37.639850 run iperf3-srv_10.42.42.10(pid=26459): Launched 23:18:37.847212 tst cs_paging_gprs_active.py:38: start network... 23:18:37.988106 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:18:38.528346 run create_hlr_db(pid=26460): Launched 23:18:38.723279 bus /gobi_6: Setting Powered False 23:18:39.743520 run create_hlr_db(pid=26460): Terminated: ok {rc=0} 23:18:40.166823 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26462): Launched 23:18:40.484864 run osmo-hlr_10.42.42.2(pid=26463): Launched 23:18:40.606573 run osmo-stp_10.42.42.5: Starting osmo-stp 23:18:41.162187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26465): Launched 23:18:41.479830 run osmo-stp_10.42.42.5(pid=26466): Launched 23:18:41.596618 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:18:42.147042 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26468): Launched 23:18:42.259024 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:18:42.535749 run patchelf(pid=26469): Launched 23:18:42.720054 run osmo-stp_10.42.42.5(pid=26466): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26466)] 23:18:42.854600 run osmo-stp_10.42.42.5(pid=26466): stdout: | (launched: 2022-12-08_23:18:41.321987) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:42.988548 run osmo-stp_10.42.42.5(pid=26466): stderr: | �[0;m�[38;5;43m20221208231841495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208231841495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208231841495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208231841496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208231841496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208231841496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208231841496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:43.118988 run osmo-stp_10.42.42.5(pid=26466): stdout: | (launched: 2022-12-08_23:18:41.321987) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:43.247794 run osmo-stp_10.42.42.5(pid=26466): stderr: | �[0;m�[38;5;43m20221208231841495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208231841495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208231841495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208231841496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208231841496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208231841496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208231841496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:43.397818 run patchelf(pid=26469): Terminating (SIGINT) 23:18:43.574106 run patchelf(pid=26469): Terminated: ok {rc=0} 23:18:43.606315 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26466): Process ended prematurely: osmo-stp_10.42.42.5(pid=26466) [trial-2351↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26466)] [trial-2351↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:18:43.615605 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 23:18:43.676747 run osmo-hlr_10.42.42.2(pid=26463): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26463)] 23:18:43.726805 run osmo-hlr_10.42.42.2(pid=26463): stdout: | (launched: 2022-12-08_23:18:40.327936) 23:18:43.777548 run osmo-hlr_10.42.42.2(pid=26463): stderr: | �[0;m�[1;31m20221208231840506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208231840506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208231840506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208231840506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208231840506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208231840506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208231840518 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208231840526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208231840527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208231840527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:18:43.820031 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26456): Terminating (SIGTERM) 23:18:43.860139 run iperf3-srv_10.42.42.10(pid=26457): Terminating (SIGTERM) 23:18:43.901050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26458): Terminating (SIGTERM) 23:18:43.941065 run iperf3-srv_10.42.42.10(pid=26459): Terminating (SIGTERM) 23:18:43.981501 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26462): Terminating (SIGTERM) 23:18:44.022261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26465): Terminating (SIGTERM) 23:18:44.062599 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26468): Terminating (SIGTERM) 23:18:44.071758 --- ParallelTerminationStrategy: PID 26456 died... 23:18:44.126023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26456): Terminated: ok {rc=0} 23:18:44.135550 --- ParallelTerminationStrategy: PID 26457 died... 23:18:44.188847 run iperf3-srv_10.42.42.10(pid=26457): Terminated {rc=256} 23:18:44.198367 --- ParallelTerminationStrategy: PID 26458 died... 23:18:44.251443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26458): Terminated: ok {rc=0} 23:18:44.261219 --- ParallelTerminationStrategy: PID 26459 died... 23:18:44.314234 run iperf3-srv_10.42.42.10(pid=26459): Terminated {rc=256} 23:18:44.323751 --- ParallelTerminationStrategy: PID 26462 died... 23:18:44.376650 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26462): Terminated: ok {rc=0} 23:18:44.386391 --- ParallelTerminationStrategy: PID 26465 died... 23:18:44.439604 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26465): Terminated: ok {rc=0} 23:18:44.449486 --- ParallelTerminationStrategy: PID 26468 died... 23:18:44.502616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26468): Terminated: ok {rc=0} 23:18:44.586370 bus /gobi_0: Setting Powered False 23:18:45.693534 bus /gobi_0: Setting Powered False 23:18:46.819569 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26466): Process ended prematurely: osmo-stp_10.42.42.5(pid=26466) [trial-2351↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26466)]