Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=29442): Process ended prematurely: osmo-stp_10.42.42.5(pid=29442) [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29442)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 23:38:03.459068 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:03.474141 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 23:38:03.654765 tst cs_paging_gprs_active.py: using LAC 17543 23:38:03.819440 tst cs_paging_gprs_active.py: using RAC 203 23:38:03.986026 tst cs_paging_gprs_active.py: using CellId 17543 23:38:04.124731 tst cs_paging_gprs_active.py: using BVCI 17544 23:38:04.150874 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.163674 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.179400 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.195652 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.207983 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.220325 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.232570 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.244605 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:04.256910 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:38:04.379971 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:38:04.682001 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:38:04.819990 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:38:05.164355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29430): Launched 23:38:05.456359 run iperf3-srv_10.42.42.10(pid=29431): Launched 23:38:05.652117 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:38:05.783197 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:38:06.125530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29434): Launched 23:38:06.419427 run iperf3-srv_10.42.42.10(pid=29435): Launched 23:38:06.622628 tst cs_paging_gprs_active.py:38: start network... 23:38:06.760197 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:38:07.315956 run create_hlr_db(pid=29436): Launched 23:38:07.498157 bus /gobi_6: Setting Powered False 23:38:08.518798 run create_hlr_db(pid=29436): Terminated: ok {rc=0} 23:38:08.957599 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29438): Launched 23:38:09.375739 run osmo-hlr_10.42.42.2(pid=29439): Launched 23:38:09.594391 run osmo-stp_10.42.42.5: Starting osmo-stp 23:38:10.284530 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29441): Launched 23:38:10.710749 run osmo-stp_10.42.42.5(pid=29442): Launched 23:38:10.948145 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:38:11.581127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29445): Launched 23:38:11.695808 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:38:11.990889 run patchelf(pid=29446): Launched 23:38:12.176742 run osmo-stp_10.42.42.5(pid=29442): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29442)] 23:38:12.314116 run osmo-stp_10.42.42.5(pid=29442): stdout: | (launched: 2022-12-08_23:38:10.444670) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:38:12.451371 run osmo-stp_10.42.42.5(pid=29442): stderr: | �[0;m�[38;5;43m20221208233810784 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233810785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233810785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233810785 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233810786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233810786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233810786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:38:12.585802 run osmo-stp_10.42.42.5(pid=29442): stdout: | (launched: 2022-12-08_23:38:10.444670) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:38:12.717832 run osmo-stp_10.42.42.5(pid=29442): stderr: | �[0;m�[38;5;43m20221208233810784 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233810785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233810785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233810785 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233810786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233810786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233810786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:38:12.870605 run patchelf(pid=29446): Terminating (SIGINT) 23:38:13.048125 run patchelf(pid=29446): Terminated: ok {rc=0} 23:38:13.082373 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29442): Process ended prematurely: osmo-stp_10.42.42.5(pid=29442) [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29442)] [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 23:38:13.092715 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 23:38:13.158186 run osmo-hlr_10.42.42.2(pid=29439): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29439)] 23:38:13.210708 run osmo-hlr_10.42.42.2(pid=29439): stdout: | (launched: 2022-12-08_23:38:09.116792) 23:38:13.264480 run osmo-hlr_10.42.42.2(pid=29439): stderr: | �[0;m�[1;31m20221208233809471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233809471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233809471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233809472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233809472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233809472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233809505 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233809522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233809522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233809523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:38:13.310164 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29430): Terminating (SIGTERM) 23:38:13.354242 run iperf3-srv_10.42.42.10(pid=29431): Terminating (SIGTERM) 23:38:13.399218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29434): Terminating (SIGTERM) 23:38:13.446075 run iperf3-srv_10.42.42.10(pid=29435): Terminating (SIGTERM) 23:38:13.490527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29438): Terminating (SIGTERM) 23:38:13.534980 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29441): Terminating (SIGTERM) 23:38:13.581118 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29445): Terminating (SIGTERM) 23:38:13.591679 --- ParallelTerminationStrategy: PID 29430 died... 23:38:13.651608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29430): Terminated: ok {rc=0} 23:38:13.662125 --- ParallelTerminationStrategy: PID 29431 died... 23:38:13.718502 run iperf3-srv_10.42.42.10(pid=29431): Terminated {rc=256} 23:38:13.730052 --- ParallelTerminationStrategy: PID 29434 died... 23:38:13.787171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29434): Terminated: ok {rc=0} 23:38:13.797615 --- ParallelTerminationStrategy: PID 29435 died... 23:38:13.855559 run iperf3-srv_10.42.42.10(pid=29435): Terminated {rc=256} 23:38:13.866158 --- ParallelTerminationStrategy: PID 29438 died... 23:38:13.923012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29438): Terminated: ok {rc=0} 23:38:13.933578 --- ParallelTerminationStrategy: PID 29441 died... 23:38:13.990252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29441): Terminated: ok {rc=0} 23:38:14.001036 --- ParallelTerminationStrategy: PID 29445 died... 23:38:14.056926 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29445): Terminated: ok {rc=0} 23:38:14.144793 bus /gobi_0: Setting Powered False 23:38:15.252743 bus /gobi_0: Setting Powered False 23:38:16.402768 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29442): Process ended prematurely: osmo-stp_10.42.42.5(pid=29442) [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29442)]