Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28356): Process ended prematurely: osmo-stp_10.42.42.5(pid=28356) [trial-2351↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28356)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 23:34:04.782586 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.793514 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 23:34:04.936127 tst cs_paging_gprs_active.py: using LAC 17523 23:34:05.062254 tst cs_paging_gprs_active.py: using RAC 183 23:34:05.185505 tst cs_paging_gprs_active.py: using CellId 17523 23:34:05.310460 tst cs_paging_gprs_active.py: using BVCI 17524 23:34:05.333721 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.344610 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.355196 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.366022 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.377137 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.387837 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.398349 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.409124 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:05.422781 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:34:05.537947 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:34:05.831406 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:34:05.965809 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:34:06.298130 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28346): Launched 23:34:06.573616 run iperf3-srv_10.42.42.10(pid=28347): Launched 23:34:06.771780 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:34:06.905766 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:34:07.238026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28348): Launched 23:34:07.514273 run iperf3-srv_10.42.42.10(pid=28349): Launched 23:34:07.711318 tst cs_paging_gprs_active.py:38: start network... 23:34:07.845522 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:34:08.358715 run create_hlr_db(pid=28350): Launched 23:34:08.544012 bus /sierra_2: Setting Powered False 23:34:09.564332 run create_hlr_db(pid=28350): Terminated: ok {rc=0} 23:34:09.967689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28352): Launched 23:34:10.269319 run osmo-hlr_10.42.42.2(pid=28353): Launched 23:34:10.384046 run osmo-stp_10.42.42.5: Starting osmo-stp 23:34:10.916621 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28355): Launched 23:34:11.217778 run osmo-stp_10.42.42.5(pid=28356): Launched 23:34:11.328380 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:34:11.854269 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28358): Launched 23:34:11.967737 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:34:12.231084 run patchelf(pid=28359): Launched 23:34:12.408233 run osmo-stp_10.42.42.5(pid=28356): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28356)] 23:34:12.537682 run osmo-stp_10.42.42.5(pid=28356): stdout: | (launched: 2022-12-08_23:34:11.069523) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:34:12.667540 run osmo-stp_10.42.42.5(pid=28356): stderr: | �[0;m�[38;5;43m20221208233411241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233411241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233411241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233411242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233411242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233411242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233411242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:34:12.793112 run osmo-stp_10.42.42.5(pid=28356): stdout: | (launched: 2022-12-08_23:34:11.069523) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:34:12.917845 run osmo-stp_10.42.42.5(pid=28356): stderr: | �[0;m�[38;5;43m20221208233411241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233411241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233411241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233411242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233411242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233411242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233411242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:34:13.062187 run patchelf(pid=28359): Terminating (SIGINT) 23:34:13.231607 run patchelf(pid=28359): Terminated: ok {rc=0} 23:34:13.262863 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28356): Process ended prematurely: osmo-stp_10.42.42.5(pid=28356) [trial-2351↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28356)] [trial-2351↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 23:34:13.272053 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:34:13.332314 run osmo-hlr_10.42.42.2(pid=28353): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28353)] 23:34:13.381009 run osmo-hlr_10.42.42.2(pid=28353): stdout: | (launched: 2022-12-08_23:34:10.120919) 23:34:13.430505 run osmo-hlr_10.42.42.2(pid=28353): stderr: | �[0;m�[1;31m20221208233410297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233410297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233410297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233410297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233410297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233410297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233410310 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233410319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233410319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233410319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:34:13.472066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28346): Terminating (SIGTERM) 23:34:13.511667 run iperf3-srv_10.42.42.10(pid=28347): Terminating (SIGTERM) 23:34:13.551304 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28348): Terminating (SIGTERM) 23:34:13.590653 run iperf3-srv_10.42.42.10(pid=28349): Terminating (SIGTERM) 23:34:13.630258 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28352): Terminating (SIGTERM) 23:34:13.669845 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28355): Terminating (SIGTERM) 23:34:13.709281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28358): Terminating (SIGTERM) 23:34:13.718723 --- ParallelTerminationStrategy: PID 28346 died... 23:34:13.771438 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28346): Terminated: ok {rc=0} 23:34:13.781375 --- ParallelTerminationStrategy: PID 28347 died... 23:34:13.833631 run iperf3-srv_10.42.42.10(pid=28347): Terminated {rc=256} 23:34:13.843378 --- ParallelTerminationStrategy: PID 28348 died... 23:34:13.895919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28348): Terminated: ok {rc=0} 23:34:13.905553 --- ParallelTerminationStrategy: PID 28349 died... 23:34:13.958111 run iperf3-srv_10.42.42.10(pid=28349): Terminated {rc=256} 23:34:13.967582 --- ParallelTerminationStrategy: PID 28352 died... 23:34:14.020656 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28352): Terminated: ok {rc=0} 23:34:14.030253 --- ParallelTerminationStrategy: PID 28355 died... 23:34:14.082685 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28355): Terminated: ok {rc=0} 23:34:14.092608 --- ParallelTerminationStrategy: PID 28358 died... 23:34:14.145172 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28358): Terminated: ok {rc=0} 23:34:14.227803 bus /gobi_0: Setting Powered False 23:34:15.333139 bus /gobi_0: Setting Powered False 23:34:16.439934 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28356): Process ended prematurely: osmo-stp_10.42.42.5(pid=28356) [trial-2351↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28356)]