Failed
dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=17106): Process ended prematurely: osmo-stp_10.42.42.5(pid=17106) [trial-2353↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17106)]
Standard Output
---------------------------------------------- trial-2353 dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 03:14:16.416338 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:16.429669 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 03:14:16.585479 tst switch_tch_pdch.py: using LAC 18678 03:14:16.731185 tst switch_tch_pdch.py: using RAC 63 03:14:16.883920 tst switch_tch_pdch.py: using CellId 18678 03:14:17.013952 tst switch_tch_pdch.py: using BVCI 18679 03:14:17.039228 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.052131 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.064914 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.077940 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.090561 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.103305 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.116204 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 03:14:17.129344 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 03:14:17.253361 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 03:14:17.543187 tst switch_tch_pdch.py:51: start network... 03:14:17.675948 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:14:18.180520 run create_hlr_db(pid=17100): Launched 03:14:18.362932 bus /gobi_6: Setting Powered False 03:14:19.384860 run create_hlr_db(pid=17100): Terminated: ok {rc=0} 03:14:19.781054 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17102): Launched 03:14:20.075633 run osmo-hlr_10.42.42.2(pid=17103): Launched 03:14:20.187096 run osmo-stp_10.42.42.5: Starting osmo-stp 03:14:20.707164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17105): Launched 03:14:21.001325 run osmo-stp_10.42.42.5(pid=17106): Launched 03:14:21.108863 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:14:21.623946 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17108): Launched 03:14:21.729549 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:14:21.986576 run patchelf(pid=17109): Launched 03:14:22.159163 run osmo-stp_10.42.42.5(pid=17106): ERR: Terminated: ERROR {rc=1} [trial-2353↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17106)] 03:14:22.285411 run osmo-stp_10.42.42.5(pid=17106): stdout: | (launched: 2022-12-09_03:14:20.856202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:14:22.412091 run osmo-stp_10.42.42.5(pid=17106): stderr: | �[0;m�[38;5;43m20221209031421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209031421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209031421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209031421025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209031421027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209031421027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209031421027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:14:22.534138 run osmo-stp_10.42.42.5(pid=17106): stdout: | (launched: 2022-12-09_03:14:20.856202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:14:22.655565 run osmo-stp_10.42.42.5(pid=17106): stderr: | �[0;m�[38;5;43m20221209031421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209031421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209031421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209031421025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209031421027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209031421027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209031421027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:14:22.796266 run patchelf(pid=17109): Terminating (SIGINT) 03:14:22.961475 run patchelf(pid=17109): Terminated: ok {rc=0} 03:14:22.991296 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=17106): Process ended prematurely: osmo-stp_10.42.42.5(pid=17106) [trial-2353↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17106)] [trial-2353↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 03:14:22.999943 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 03:14:23.060027 run osmo-hlr_10.42.42.2(pid=17103): ERR: Terminated: ERROR {rc=237} [trial-2353↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17103)] 03:14:23.108805 run osmo-hlr_10.42.42.2(pid=17103): stdout: | (launched: 2022-12-09_03:14:19.930367) 03:14:23.158479 run osmo-hlr_10.42.42.2(pid=17103): stderr: | �[0;m�[1;31m20221209031420106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209031420106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209031420106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209031420106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209031420106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209031420106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209031420119 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209031420128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209031420128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209031420128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:14:23.200312 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17102): Terminating (SIGTERM) 03:14:23.240144 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17105): Terminating (SIGTERM) 03:14:23.279910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17108): Terminating (SIGTERM) 03:14:23.289365 --- ParallelTerminationStrategy: PID 17102 died... 03:14:23.342539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17102): Terminated: ok {rc=0} 03:14:23.352350 --- ParallelTerminationStrategy: PID 17105 died... 03:14:23.404910 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17105): Terminated: ok {rc=0} 03:14:23.414677 --- ParallelTerminationStrategy: PID 17108 died... 03:14:23.467261 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17108): Terminated: ok {rc=0} 03:14:23.554924 bus /gobi_0: Setting Powered False 03:14:24.657899 bus /gobi_0: Setting Powered False 03:14:25.769685 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17106): Process ended prematurely: osmo-stp_10.42.42.5(pid=17106) [trial-2353↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17106)]