Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=16903): Process ended prematurely: osmo-stp_10.42.42.5(pid=16903) [trial-2353↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16903)]
Standard Output
---------------------------------------------- trial-2353 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 03:11:18.461703 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:18.472235 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 03:11:18.601247 tst cs_paging_gprs_active.py: using LAC 18663 03:11:18.718115 tst cs_paging_gprs_active.py: using RAC 48 03:11:18.834230 tst cs_paging_gprs_active.py: using CellId 18663 03:11:18.949555 tst cs_paging_gprs_active.py: using BVCI 18664 03:11:18.972224 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:18.982998 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:18.993505 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:19.004184 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:19.015060 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:19.025850 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:19.036630 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:19.047596 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:19.058528 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:11:19.171874 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:11:19.464532 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:11:19.599244 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:11:19.930938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16893): Launched 03:11:20.206845 run iperf3-srv_10.42.42.10(pid=16894): Launched 03:11:20.403553 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:11:20.537247 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:11:20.868843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16895): Launched 03:11:21.144907 run iperf3-srv_10.42.42.10(pid=16896): Launched 03:11:21.341273 tst cs_paging_gprs_active.py:38: start network... 03:11:21.474992 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:11:21.987493 run create_hlr_db(pid=16897): Launched 03:11:22.172522 bus /sierra_2: Setting Powered False 03:11:23.194047 run create_hlr_db(pid=16897): Terminated: ok {rc=0} 03:11:23.596262 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16899): Launched 03:11:23.896249 run osmo-hlr_10.42.42.2(pid=16900): Launched 03:11:24.010778 run osmo-stp_10.42.42.5: Starting osmo-stp 03:11:24.530972 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16902): Launched 03:11:24.831412 run osmo-stp_10.42.42.5(pid=16903): Launched 03:11:24.941120 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:11:25.463634 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16905): Launched 03:11:25.570596 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:11:25.831739 run patchelf(pid=16906): Launched 03:11:26.006808 run osmo-stp_10.42.42.5(pid=16903): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16903)] 03:11:26.134912 run osmo-stp_10.42.42.5(pid=16903): stdout: | (launched: 2022-12-09_03:11:24.683325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:11:26.263634 run osmo-stp_10.42.42.5(pid=16903): stderr: | �[0;m�[38;5;43m20221209031124854 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209031124854 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209031124854 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209031124855 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209031124855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209031124855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209031124855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:11:26.387548 run osmo-stp_10.42.42.5(pid=16903): stdout: | (launched: 2022-12-09_03:11:24.683325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:11:26.510444 run osmo-stp_10.42.42.5(pid=16903): stderr: | �[0;m�[38;5;43m20221209031124854 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209031124854 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209031124854 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209031124855 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209031124855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209031124855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209031124855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:11:26.654461 run patchelf(pid=16906): Terminating (SIGINT) 03:11:26.822773 run patchelf(pid=16906): Terminated: ok {rc=0} 03:11:26.853811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16903): Process ended prematurely: osmo-stp_10.42.42.5(pid=16903) [trial-2353↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16903)] [trial-2353↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 03:11:26.862954 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 03:11:26.922843 run osmo-hlr_10.42.42.2(pid=16900): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16900)] 03:11:26.971309 run osmo-hlr_10.42.42.2(pid=16900): stdout: | (launched: 2022-12-09_03:11:23.748608) 03:11:27.020660 run osmo-hlr_10.42.42.2(pid=16900): stderr: | �[0;m�[1;31m20221209031123923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209031123923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209031123923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209031123923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209031123923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209031123923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209031123938 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209031123947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209031123948 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209031123948 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:11:27.062299 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16893): Terminating (SIGTERM) 03:11:27.101689 run iperf3-srv_10.42.42.10(pid=16894): Terminating (SIGTERM) 03:11:27.141063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16895): Terminating (SIGTERM) 03:11:27.180312 run iperf3-srv_10.42.42.10(pid=16896): Terminating (SIGTERM) 03:11:27.219894 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16899): Terminating (SIGTERM) 03:11:27.259355 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16902): Terminating (SIGTERM) 03:11:27.298786 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16905): Terminating (SIGTERM) 03:11:27.308116 --- ParallelTerminationStrategy: PID 16893 died... 03:11:27.361614 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16893): Terminated: ok {rc=0} 03:11:27.371162 --- ParallelTerminationStrategy: PID 16894 died... 03:11:27.423333 run iperf3-srv_10.42.42.10(pid=16894): Terminated {rc=256} 03:11:27.432938 --- ParallelTerminationStrategy: PID 16895 died... 03:11:27.485992 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16895): Terminated: ok {rc=0} 03:11:27.495494 --- ParallelTerminationStrategy: PID 16896 died... 03:11:27.548017 run iperf3-srv_10.42.42.10(pid=16896): Terminated {rc=256} 03:11:27.557623 --- ParallelTerminationStrategy: PID 16899 died... 03:11:27.610006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16899): Terminated: ok {rc=0} 03:11:27.619700 --- ParallelTerminationStrategy: PID 16902 died... 03:11:27.672150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16902): Terminated: ok {rc=0} 03:11:27.681813 --- ParallelTerminationStrategy: PID 16905 died... 03:11:27.734298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16905): Terminated: ok {rc=0} 03:11:27.821585 bus /gobi_0: Setting Powered False 03:11:28.924320 bus /gobi_0: Setting Powered False 03:11:30.030161 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16903): Process ended prematurely: osmo-stp_10.42.42.5(pid=16903) [trial-2353↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16903)]