Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=17564): Process ended prematurely: osmo-stp_10.42.42.5(pid=17564) [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17564)]
Standard Output
---------------------------------------------- trial-2353 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 03:20:25.247631 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.258850 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 03:20:25.395568 tst cs_paging_gprs_active.py: using LAC 18711 03:20:25.510522 tst cs_paging_gprs_active.py: using RAC 96 03:20:25.624576 tst cs_paging_gprs_active.py: using CellId 18711 03:20:25.746220 tst cs_paging_gprs_active.py: using BVCI 18712 03:20:25.770533 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.782559 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.794495 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.806519 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.818612 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.830582 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.842798 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.854790 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:25.867312 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:25.985585 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:26.269611 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:20:26.401868 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:26.727288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17554): Launched 03:20:26.997209 run iperf3-srv_10.42.42.10(pid=17555): Launched 03:20:27.190500 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:20:27.322486 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:27.647330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17556): Launched 03:20:27.917332 run iperf3-srv_10.42.42.10(pid=17557): Launched 03:20:28.109337 tst cs_paging_gprs_active.py:38: start network... 03:20:28.240518 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:20:28.743726 run create_hlr_db(pid=17558): Launched 03:20:28.926321 bus /gobi_6: Setting Powered False 03:20:29.947442 run create_hlr_db(pid=17558): Terminated: ok {rc=0} 03:20:30.366407 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17560): Launched 03:20:30.680796 run osmo-hlr_10.42.42.2(pid=17561): Launched 03:20:30.796930 run osmo-stp_10.42.42.5: Starting osmo-stp 03:20:31.385529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17563): Launched 03:20:31.811245 run osmo-stp_10.42.42.5(pid=17564): Launched 03:20:32.027664 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:20:32.581515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17566): Launched 03:20:32.694021 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:20:32.967836 run patchelf(pid=17567): Launched 03:20:33.151721 run osmo-stp_10.42.42.5(pid=17564): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17564)] 03:20:33.286467 run osmo-stp_10.42.42.5(pid=17564): stdout: | (launched: 2022-12-09_03:20:31.550134) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:33.421412 run osmo-stp_10.42.42.5(pid=17564): stderr: | �[0;m�[38;5;43m20221209032031837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209032031837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209032031837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209032031838 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209032031838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209032031838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209032031838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:33.552045 run osmo-stp_10.42.42.5(pid=17564): stdout: | (launched: 2022-12-09_03:20:31.550134) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:33.681769 run osmo-stp_10.42.42.5(pid=17564): stderr: | �[0;m�[38;5;43m20221209032031837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209032031837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209032031837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209032031838 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209032031838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209032031838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209032031838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:33.832044 run patchelf(pid=17567): Terminating (SIGINT) 03:20:34.008936 run patchelf(pid=17567): Terminated: ok {rc=0} 03:20:34.041633 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17564): Process ended prematurely: osmo-stp_10.42.42.5(pid=17564) [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17564)] [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 03:20:34.051281 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:20:34.112990 run osmo-hlr_10.42.42.2(pid=17561): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17561)] 03:20:34.163603 run osmo-hlr_10.42.42.2(pid=17561): stdout: | (launched: 2022-12-09_03:20:30.528063) 03:20:34.214945 run osmo-hlr_10.42.42.2(pid=17561): stderr: | �[0;m�[1;31m20221209032030701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209032030701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209032030701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209032030701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209032030701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209032030702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209032030713 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209032030722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209032030722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209032030722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:20:34.258613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17554): Terminating (SIGTERM) 03:20:34.299908 run iperf3-srv_10.42.42.10(pid=17555): Terminating (SIGTERM) 03:20:34.341400 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17556): Terminating (SIGTERM) 03:20:34.382614 run iperf3-srv_10.42.42.10(pid=17557): Terminating (SIGTERM) 03:20:34.423999 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17560): Terminating (SIGTERM) 03:20:34.465419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17563): Terminating (SIGTERM) 03:20:34.506757 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17566): Terminating (SIGTERM) 03:20:34.516199 --- ParallelTerminationStrategy: PID 17554 died... 03:20:34.571303 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17554): Terminated: ok {rc=0} 03:20:34.581236 --- ParallelTerminationStrategy: PID 17555 died... 03:20:34.635859 run iperf3-srv_10.42.42.10(pid=17555): Terminated {rc=256} 03:20:34.645606 --- ParallelTerminationStrategy: PID 17556 died... 03:20:34.700660 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17556): Terminated: ok {rc=0} 03:20:34.710535 --- ParallelTerminationStrategy: PID 17557 died... 03:20:34.764850 run iperf3-srv_10.42.42.10(pid=17557): Terminated {rc=256} 03:20:34.774685 --- ParallelTerminationStrategy: PID 17560 died... 03:20:34.829196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17560): Terminated: ok {rc=0} 03:20:34.838929 --- ParallelTerminationStrategy: PID 17563 died... 03:20:34.893702 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17563): Terminated: ok {rc=0} 03:20:34.903539 --- ParallelTerminationStrategy: PID 17566 died... 03:20:34.958411 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17566): Terminated: ok {rc=0} 03:20:35.045384 bus /gobi_0: Setting Powered False 03:20:36.151555 bus /gobi_0: Setting Powered False 03:20:37.259136 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17564): Process ended prematurely: osmo-stp_10.42.42.5(pid=17564) [trial-2353↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17564)]