Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11660): Process ended prematurely: osmo-stp_10.42.42.5(pid=11660) [trial-2353↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11660)]
Standard Output
---------------------------------------------- trial-2353 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:23:46.754195 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:46.766285 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:23:46.923511 tst cs_paging_gprs_active.py: using LAC 18409 02:23:47.054390 tst cs_paging_gprs_active.py: using RAC 49 02:23:47.180860 tst cs_paging_gprs_active.py: using CellId 18409 02:23:47.302058 tst cs_paging_gprs_active.py: using BVCI 18410 02:23:47.325790 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.336728 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.347538 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.358852 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.370150 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.381560 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.392774 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.403855 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:47.415147 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:23:47.537994 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:23:47.822691 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:23:47.951716 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:23:48.269517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11650): Launched 02:23:48.533826 run iperf3-srv_10.42.42.10(pid=11651): Launched 02:23:48.721797 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:23:48.850515 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:23:49.168435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11652): Launched 02:23:49.433170 run iperf3-srv_10.42.42.10(pid=11653): Launched 02:23:49.621241 tst cs_paging_gprs_active.py:38: start network... 02:23:49.749056 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:23:50.242584 run create_hlr_db(pid=11654): Launched 02:23:50.418818 bus /gobi_6: Setting Powered False 02:23:51.440498 run create_hlr_db(pid=11654): Terminated: ok {rc=0} 02:23:51.877310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11656): Launched 02:23:52.206802 run osmo-hlr_10.42.42.2(pid=11657): Launched 02:23:52.330404 run osmo-stp_10.42.42.5: Starting osmo-stp 02:23:52.901343 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11659): Launched 02:23:53.231849 run osmo-stp_10.42.42.5(pid=11660): Launched 02:23:53.352179 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:23:53.923196 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11662): Launched 02:23:54.041370 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:23:54.328017 run patchelf(pid=11663): Launched 02:23:54.519780 run osmo-stp_10.42.42.5(pid=11660): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11660)] 02:23:54.659589 run osmo-stp_10.42.42.5(pid=11660): stdout: | (launched: 2022-12-09_02:23:53.069097) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:54.799889 run osmo-stp_10.42.42.5(pid=11660): stderr: | �[0;m�[38;5;43m20221209022353261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209022353261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209022353262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209022353262 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209022353263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209022353263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209022353263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:54.935470 run osmo-stp_10.42.42.5(pid=11660): stdout: | (launched: 2022-12-09_02:23:53.069097) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:55.070234 run osmo-stp_10.42.42.5(pid=11660): stderr: | �[0;m�[38;5;43m20221209022353261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209022353261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209022353262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209022353262 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209022353263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209022353263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209022353263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:55.227356 run patchelf(pid=11663): Terminating (SIGINT) 02:23:55.410881 run patchelf(pid=11663): Terminated: ok {rc=0} 02:23:55.444347 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11660): Process ended prematurely: osmo-stp_10.42.42.5(pid=11660) [trial-2353↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11660)] [trial-2353↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:23:55.454092 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:23:55.517147 run osmo-hlr_10.42.42.2(pid=11657): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11657)] 02:23:55.568515 run osmo-hlr_10.42.42.2(pid=11657): stdout: | (launched: 2022-12-09_02:23:52.044724) 02:23:55.620581 run osmo-hlr_10.42.42.2(pid=11657): stderr: | �[0;m�[1;31m20221209022352244 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209022352244 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209022352245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209022352245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209022352245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209022352245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209022352257 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209022352265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209022352265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209022352265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:23:55.664644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11650): Terminating (SIGTERM) 02:23:55.706525 run iperf3-srv_10.42.42.10(pid=11651): Terminating (SIGTERM) 02:23:55.748097 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11652): Terminating (SIGTERM) 02:23:55.789874 run iperf3-srv_10.42.42.10(pid=11653): Terminating (SIGTERM) 02:23:55.832178 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11656): Terminating (SIGTERM) 02:23:55.873741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11659): Terminating (SIGTERM) 02:23:55.915548 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11662): Terminating (SIGTERM) 02:23:55.925423 --- ParallelTerminationStrategy: PID 11650 died... 02:23:55.981101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11650): Terminated: ok {rc=0} 02:23:55.991220 --- ParallelTerminationStrategy: PID 11651 died... 02:23:56.046476 run iperf3-srv_10.42.42.10(pid=11651): Terminated {rc=256} 02:23:56.056637 --- ParallelTerminationStrategy: PID 11652 died... 02:23:56.112419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11652): Terminated: ok {rc=0} 02:23:56.122282 --- ParallelTerminationStrategy: PID 11653 died... 02:23:56.177408 run iperf3-srv_10.42.42.10(pid=11653): Terminated {rc=256} 02:23:56.187927 --- ParallelTerminationStrategy: PID 11656 died... 02:23:56.244010 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11656): Terminated: ok {rc=0} 02:23:56.254105 --- ParallelTerminationStrategy: PID 11659 died... 02:23:56.309530 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11659): Terminated: ok {rc=0} 02:23:56.319487 --- ParallelTerminationStrategy: PID 11662 died... 02:23:56.375069 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11662): Terminated: ok {rc=0} 02:23:56.462593 bus /gobi_0: Setting Powered False 02:23:57.565048 bus /gobi_0: Setting Powered False 02:23:58.674552 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11660): Process ended prematurely: osmo-stp_10.42.42.5(pid=11660) [trial-2353↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11660)]