Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12190): Process ended prematurely: osmo-stp_10.42.42.5(pid=12190) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12190)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:31:23.678066 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:23.689649 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:31:23.840431 tst cs_paging_gprs_active.py: using LAC 18450 02:31:23.967673 tst cs_paging_gprs_active.py: using RAC 90 02:31:24.096336 tst cs_paging_gprs_active.py: using CellId 18450 02:31:24.223958 tst cs_paging_gprs_active.py: using BVCI 18451 02:31:24.249641 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.261240 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.272557 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.284078 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.295581 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.307015 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.318714 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.330216 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:24.341965 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:31:24.462130 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:31:24.747970 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:31:24.877991 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:25.199534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12180): Launched 02:31:25.466880 run iperf3-srv_10.42.42.10(pid=12181): Launched 02:31:25.655522 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:31:25.784877 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:26.106361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12182): Launched 02:31:26.373394 run iperf3-srv_10.42.42.10(pid=12183): Launched 02:31:26.562832 tst cs_paging_gprs_active.py:38: start network... 02:31:26.692276 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:27.189093 run create_hlr_db(pid=12184): Launched 02:31:27.382390 bus /gobi_6: Setting Powered False 02:31:28.402100 run create_hlr_db(pid=12184): Terminated: ok {rc=0} 02:31:28.842555 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12186): Launched 02:31:29.174380 run osmo-hlr_10.42.42.2(pid=12187): Launched 02:31:29.298186 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:29.870583 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12189): Launched 02:31:30.180827 run osmo-stp_10.42.42.5(pid=12190): Launched 02:31:30.304872 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:31:30.866284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12192): Launched 02:31:31.001678 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:31:31.324025 run patchelf(pid=12193): Launched 02:31:31.537032 run osmo-stp_10.42.42.5(pid=12190): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12190)] 02:31:31.683741 run osmo-stp_10.42.42.5(pid=12190): stdout: | (launched: 2022-12-09_02:31:30.029067) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:31.828692 run osmo-stp_10.42.42.5(pid=12190): stderr: | �[0;m�[38;5;43m20221209023130201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023130201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023130201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023130202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023130204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023130204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023130204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:31.966187 run osmo-stp_10.42.42.5(pid=12190): stdout: | (launched: 2022-12-09_02:31:30.029067) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:32.096810 run osmo-stp_10.42.42.5(pid=12190): stderr: | �[0;m�[38;5;43m20221209023130201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023130201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023130201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023130202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023130204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023130204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023130204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:32.249431 run patchelf(pid=12193): Terminating (SIGINT) 02:31:32.423500 run patchelf(pid=12193): Terminated: ok {rc=0} 02:31:32.455833 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12190): Process ended prematurely: osmo-stp_10.42.42.5(pid=12190) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12190)] [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:31:32.465378 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:31:32.526292 run osmo-hlr_10.42.42.2(pid=12187): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12187)] 02:31:32.576188 run osmo-hlr_10.42.42.2(pid=12187): stdout: | (launched: 2022-12-09_02:31:29.011595) 02:31:32.626241 run osmo-hlr_10.42.42.2(pid=12187): stderr: | �[0;m�[1;31m20221209023129213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023129213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023129213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023129213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023129213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023129213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023129226 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023129234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023129234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023129234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:31:32.668988 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12180): Terminating (SIGTERM) 02:31:32.709064 run iperf3-srv_10.42.42.10(pid=12181): Terminating (SIGTERM) 02:31:32.749165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12182): Terminating (SIGTERM) 02:31:32.789161 run iperf3-srv_10.42.42.10(pid=12183): Terminating (SIGTERM) 02:31:32.829603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12186): Terminating (SIGTERM) 02:31:32.869796 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12189): Terminating (SIGTERM) 02:31:32.909909 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12192): Terminating (SIGTERM) 02:31:32.919174 --- ParallelTerminationStrategy: PID 12180 died... 02:31:32.972656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12180): Terminated: ok {rc=0} 02:31:32.982185 --- ParallelTerminationStrategy: PID 12181 died... 02:31:33.035046 run iperf3-srv_10.42.42.10(pid=12181): Terminated {rc=256} 02:31:33.044633 --- ParallelTerminationStrategy: PID 12182 died... 02:31:33.098264 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12182): Terminated: ok {rc=0} 02:31:33.107886 --- ParallelTerminationStrategy: PID 12183 died... 02:31:33.160586 run iperf3-srv_10.42.42.10(pid=12183): Terminated {rc=256} 02:31:33.170181 --- ParallelTerminationStrategy: PID 12186 died... 02:31:33.223288 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12186): Terminated: ok {rc=0} 02:31:33.233396 --- ParallelTerminationStrategy: PID 12189 died... 02:31:33.286741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12189): Terminated: ok {rc=0} 02:31:33.296424 --- ParallelTerminationStrategy: PID 12192 died... 02:31:33.349940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12192): Terminated: ok {rc=0} 02:31:33.439179 bus /gobi_0: Setting Powered False 02:31:34.542887 bus /gobi_0: Setting Powered False 02:31:35.654673 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12190): Process ended prematurely: osmo-stp_10.42.42.5(pid=12190) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12190)]