Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=12398): Process ended prematurely: osmo-stp_10.42.42.5(pid=12398) [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12398)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 02:34:22.847825 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:22.859368 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 02:34:22.996586 tst cs_paging_gprs_active.py: using LAC 18465 02:34:23.125276 tst cs_paging_gprs_active.py: using RAC 105 02:34:23.244207 tst cs_paging_gprs_active.py: using CellId 18465 02:34:23.359875 tst cs_paging_gprs_active.py: using BVCI 18466 02:34:23.382998 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.394494 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.405696 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.416889 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.427981 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.439195 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.450349 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.461357 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:34:23.472529 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:34:23.590766 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:34:23.884051 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:34:24.018421 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:34:24.348828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12388): Launched 02:34:24.625543 run iperf3-srv_10.42.42.10(pid=12389): Launched 02:34:24.822680 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:34:24.956886 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:34:25.287956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12390): Launched 02:34:25.563735 run iperf3-srv_10.42.42.10(pid=12391): Launched 02:34:25.760999 tst cs_paging_gprs_active.py:38: start network... 02:34:25.895237 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:34:26.398660 run create_hlr_db(pid=12392): Launched 02:34:26.584546 bus /gobi_6: Setting Powered False 02:34:27.606727 run create_hlr_db(pid=12392): Terminated: ok {rc=0} 02:34:28.005122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12394): Launched 02:34:28.302450 run osmo-hlr_10.42.42.2(pid=12395): Launched 02:34:28.412264 run osmo-stp_10.42.42.5: Starting osmo-stp 02:34:28.929432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12397): Launched 02:34:29.227477 run osmo-stp_10.42.42.5(pid=12398): Launched 02:34:29.336585 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:34:29.856479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12400): Launched 02:34:29.962758 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:34:30.222753 run patchelf(pid=12401): Launched 02:34:30.397370 run osmo-stp_10.42.42.5(pid=12398): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12398)] 02:34:30.524842 run osmo-stp_10.42.42.5(pid=12398): stdout: | (launched: 2022-12-09_02:34:29.080768) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:34:30.653401 run osmo-stp_10.42.42.5(pid=12398): stderr: | �[0;m�[38;5;43m20221209023429248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023429248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023429248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023429249 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023429249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023429249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023429249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:34:30.776900 run osmo-stp_10.42.42.5(pid=12398): stdout: | (launched: 2022-12-09_02:34:29.080768) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:34:30.919585 run osmo-stp_10.42.42.5(pid=12398): stderr: | �[0;m�[38;5;43m20221209023429248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023429248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023429248 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023429249 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023429249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023429249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023429249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:34:31.079901 run patchelf(pid=12401): Terminating (SIGINT) 02:34:31.265257 run patchelf(pid=12401): Terminated: ok {rc=0} 02:34:31.300806 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12398): Process ended prematurely: osmo-stp_10.42.42.5(pid=12398) [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12398)] [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 02:34:31.313963 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:34:31.389284 run osmo-hlr_10.42.42.2(pid=12395): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12395)] 02:34:31.448700 run osmo-hlr_10.42.42.2(pid=12395): stdout: | (launched: 2022-12-09_02:34:28.156366) 02:34:31.510800 run osmo-hlr_10.42.42.2(pid=12395): stderr: | �[0;m�[1;31m20221209023428330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023428330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023428330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023428330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023428330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023428330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023428342 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023428351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023428351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023428351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:34:31.563604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12388): Terminating (SIGTERM) 02:34:31.615620 run iperf3-srv_10.42.42.10(pid=12389): Terminating (SIGTERM) 02:34:31.667890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12390): Terminating (SIGTERM) 02:34:31.718151 run iperf3-srv_10.42.42.10(pid=12391): Terminating (SIGTERM) 02:34:31.770049 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12394): Terminating (SIGTERM) 02:34:31.817401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12397): Terminating (SIGTERM) 02:34:31.865049 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12400): Terminating (SIGTERM) 02:34:31.875875 --- ParallelTerminationStrategy: PID 12388 died... 02:34:31.937934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12388): Terminated: ok {rc=0} 02:34:31.949131 --- ParallelTerminationStrategy: PID 12389 died... 02:34:32.009917 run iperf3-srv_10.42.42.10(pid=12389): Terminated {rc=256} 02:34:32.021044 --- ParallelTerminationStrategy: PID 12390 died... 02:34:32.081141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12390): Terminated: ok {rc=0} 02:34:32.092121 --- ParallelTerminationStrategy: PID 12391 died... 02:34:32.151479 run iperf3-srv_10.42.42.10(pid=12391): Terminated {rc=256} 02:34:32.163600 --- ParallelTerminationStrategy: PID 12394 died... 02:34:32.223734 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12394): Terminated: ok {rc=0} 02:34:32.234818 --- ParallelTerminationStrategy: PID 12397 died... 02:34:32.291567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12397): Terminated: ok {rc=0} 02:34:32.302282 --- ParallelTerminationStrategy: PID 12400 died... 02:34:32.358027 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12400): Terminated: ok {rc=0} 02:34:32.444154 bus /gobi_0: Setting Powered False 02:34:33.550868 bus /gobi_0: Setting Powered False 02:34:34.661952 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12398): Process ended prematurely: osmo-stp_10.42.42.5(pid=12398) [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12398)]