Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=12122): Process ended prematurely: osmo-stp_10.42.42.5(pid=12122) [trial-2353↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12122)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 02:30:23.077261 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.088423 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 02:30:23.232821 tst cs_paging_gprs_active.py: using LAC 18445 02:30:23.362657 tst cs_paging_gprs_active.py: using RAC 85 02:30:23.490101 tst cs_paging_gprs_active.py: using CellId 18445 02:30:23.617631 tst cs_paging_gprs_active.py: using BVCI 18446 02:30:23.642843 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.654097 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.665165 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.676370 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.687561 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.698812 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.710308 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.721542 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:23.732793 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 02:30:23.856564 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 02:30:24.155988 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:30:24.295435 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:30:24.639421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12112): Launched 02:30:24.924267 run iperf3-srv_10.42.42.10(pid=12113): Launched 02:30:25.127302 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:30:25.265746 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:30:25.608095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12114): Launched 02:30:25.893461 run iperf3-srv_10.42.42.10(pid=12115): Launched 02:30:26.096281 tst cs_paging_gprs_active.py:38: start network... 02:30:26.234667 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:30:26.755941 run create_hlr_db(pid=12116): Launched 02:30:26.947010 bus /sierra_2: Setting Powered False 02:30:27.968057 run create_hlr_db(pid=12116): Terminated: ok {rc=0} 02:30:28.383707 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12118): Launched 02:30:28.695660 run osmo-hlr_10.42.42.2(pid=12119): Launched 02:30:28.819637 run osmo-stp_10.42.42.5: Starting osmo-stp 02:30:29.360055 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12121): Launched 02:30:29.669195 run osmo-stp_10.42.42.5(pid=12122): Launched 02:30:29.781723 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:30:30.322031 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12124): Launched 02:30:30.432361 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:30:30.702832 run patchelf(pid=12125): Launched 02:30:30.893472 run osmo-stp_10.42.42.5(pid=12122): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12122)] 02:30:31.028444 run osmo-stp_10.42.42.5(pid=12122): stdout: | (launched: 2022-12-09_02:30:29.517148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:30:31.163853 run osmo-stp_10.42.42.5(pid=12122): stderr: | �[0;m�[38;5;43m20221209023029688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023029688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023029688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023029689 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023029689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023029689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023029689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:30:31.295324 run osmo-stp_10.42.42.5(pid=12122): stdout: | (launched: 2022-12-09_02:30:29.517148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:30:31.425587 run osmo-stp_10.42.42.5(pid=12122): stderr: | �[0;m�[38;5;43m20221209023029688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023029688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023029688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023029689 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023029689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023029689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023029689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:30:31.575953 run patchelf(pid=12125): Terminating (SIGINT) 02:30:31.752197 run patchelf(pid=12125): Terminated: ok {rc=0} 02:30:31.785285 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12122): Process ended prematurely: osmo-stp_10.42.42.5(pid=12122) [trial-2353↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12122)] [trial-2353↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 02:30:31.795824 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:30:31.857773 run osmo-hlr_10.42.42.2(pid=12119): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12119)] 02:30:31.908098 run osmo-hlr_10.42.42.2(pid=12119): stdout: | (launched: 2022-12-09_02:30:28.541301) 02:30:31.959360 run osmo-hlr_10.42.42.2(pid=12119): stderr: | �[0;m�[1;31m20221209023028717 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023028717 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023028717 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023028717 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023028717 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023028717 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023028729 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023028737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023028737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023028738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:30:32.017572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12112): Terminating (SIGTERM) 02:30:32.074281 run iperf3-srv_10.42.42.10(pid=12113): Terminating (SIGTERM) 02:30:32.116682 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12114): Terminating (SIGTERM) 02:30:32.158274 run iperf3-srv_10.42.42.10(pid=12115): Terminating (SIGTERM) 02:30:32.202289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12118): Terminating (SIGTERM) 02:30:32.242864 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12121): Terminating (SIGTERM) 02:30:32.283942 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12124): Terminating (SIGTERM) 02:30:32.293331 --- ParallelTerminationStrategy: PID 12112 died... 02:30:32.347322 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12112): Terminated: ok {rc=0} 02:30:32.356920 --- ParallelTerminationStrategy: PID 12113 died... 02:30:32.410281 run iperf3-srv_10.42.42.10(pid=12113): Terminated {rc=256} 02:30:32.419764 --- ParallelTerminationStrategy: PID 12114 died... 02:30:32.473195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12114): Terminated: ok {rc=0} 02:30:32.482689 --- ParallelTerminationStrategy: PID 12115 died... 02:30:32.535632 run iperf3-srv_10.42.42.10(pid=12115): Terminated {rc=256} 02:30:32.545319 --- ParallelTerminationStrategy: PID 12118 died... 02:30:32.598206 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12118): Terminated: ok {rc=0} 02:30:32.607747 --- ParallelTerminationStrategy: PID 12121 died... 02:30:32.660567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12121): Terminated: ok {rc=0} 02:30:32.670204 --- ParallelTerminationStrategy: PID 12124 died... 02:30:32.723792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12124): Terminated: ok {rc=0} 02:30:32.810017 bus /gobi_0: Setting Powered False 02:30:33.918160 bus /gobi_0: Setting Powered False 02:30:35.026503 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12122): Process ended prematurely: osmo-stp_10.42.42.5(pid=12122) [trial-2353↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12122)]