Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13755): Process ended prematurely: osmo-stp_10.42.42.5(pid=13755) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13755)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:42:15.600366 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:15.611458 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:42:15.770188 tst cs_paging_gprs_active.py: using LAC 18507 02:42:15.917513 tst cs_paging_gprs_active.py: using RAC 147 02:42:16.041067 tst cs_paging_gprs_active.py: using CellId 18507 02:42:16.167268 tst cs_paging_gprs_active.py: using BVCI 18508 02:42:16.193416 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.205987 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.218417 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.230557 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.243732 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.256863 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.271551 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.283552 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:42:16.296689 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:42:16.415378 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:42:16.702416 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:42:16.832223 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:42:17.195344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13745): Launched 02:42:17.475235 run iperf3-srv_10.42.42.10(pid=13746): Launched 02:42:17.674259 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:42:17.810496 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:42:18.145207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13747): Launched 02:42:18.424902 run iperf3-srv_10.42.42.10(pid=13748): Launched 02:42:18.623969 tst cs_paging_gprs_active.py:38: start network... 02:42:18.759687 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:42:19.278869 run create_hlr_db(pid=13749): Launched 02:42:19.465737 bus /gobi_6: Setting Powered False 02:42:20.488063 run create_hlr_db(pid=13749): Terminated: ok {rc=0} 02:42:20.892810 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13751): Launched 02:42:21.195420 run osmo-hlr_10.42.42.2(pid=13752): Launched 02:42:21.306938 run osmo-stp_10.42.42.5: Starting osmo-stp 02:42:21.830013 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13754): Launched 02:42:22.132223 run osmo-stp_10.42.42.5(pid=13755): Launched 02:42:22.251020 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:42:22.780321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13757): Launched 02:42:22.887640 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:42:23.150427 run patchelf(pid=13758): Launched 02:42:23.327691 run osmo-stp_10.42.42.5(pid=13755): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13755)] 02:42:23.456587 run osmo-stp_10.42.42.5(pid=13755): stdout: | (launched: 2022-12-09_02:42:21.983578) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:42:23.586158 run osmo-stp_10.42.42.5(pid=13755): stderr: | �[0;m�[38;5;43m20221209024222154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024222154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024222154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024222155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024222155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024222155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024222155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:42:23.711278 run osmo-stp_10.42.42.5(pid=13755): stdout: | (launched: 2022-12-09_02:42:21.983578) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:42:23.835356 run osmo-stp_10.42.42.5(pid=13755): stderr: | �[0;m�[38;5;43m20221209024222154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024222154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024222154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024222155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024222155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024222155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024222155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:42:23.978997 run patchelf(pid=13758): Terminating (SIGINT) 02:42:24.147837 run patchelf(pid=13758): Terminated: ok {rc=0} 02:42:24.178981 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13755): Process ended prematurely: osmo-stp_10.42.42.5(pid=13755) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13755)] [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:42:24.188219 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 02:42:24.248467 run osmo-hlr_10.42.42.2(pid=13752): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13752)] 02:42:24.297269 run osmo-hlr_10.42.42.2(pid=13752): stdout: | (launched: 2022-12-09_02:42:21.046817) 02:42:24.347054 run osmo-hlr_10.42.42.2(pid=13752): stderr: | �[0;m�[1;31m20221209024221224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209024221224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209024221224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209024221224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209024221224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209024221224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209024221238 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209024221248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209024221248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209024221248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:42:24.388913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13745): Terminating (SIGTERM) 02:42:24.428811 run iperf3-srv_10.42.42.10(pid=13746): Terminating (SIGTERM) 02:42:24.468230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13747): Terminating (SIGTERM) 02:42:24.507485 run iperf3-srv_10.42.42.10(pid=13748): Terminating (SIGTERM) 02:42:24.546828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13751): Terminating (SIGTERM) 02:42:24.586228 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13754): Terminating (SIGTERM) 02:42:24.625805 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13757): Terminating (SIGTERM) 02:42:24.635119 --- ParallelTerminationStrategy: PID 13745 died... 02:42:24.688294 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13745): Terminated: ok {rc=0} 02:42:24.698162 --- ParallelTerminationStrategy: PID 13746 died... 02:42:24.750898 run iperf3-srv_10.42.42.10(pid=13746): Terminated {rc=256} 02:42:24.760497 --- ParallelTerminationStrategy: PID 13747 died... 02:42:24.813367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13747): Terminated: ok {rc=0} 02:42:24.823026 --- ParallelTerminationStrategy: PID 13748 died... 02:42:24.875535 run iperf3-srv_10.42.42.10(pid=13748): Terminated {rc=256} 02:42:24.885204 --- ParallelTerminationStrategy: PID 13751 died... 02:42:24.938066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13751): Terminated: ok {rc=0} 02:42:24.947489 --- ParallelTerminationStrategy: PID 13754 died... 02:42:25.000233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13754): Terminated: ok {rc=0} 02:42:25.009763 --- ParallelTerminationStrategy: PID 13757 died... 02:42:25.062965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13757): Terminated: ok {rc=0} 02:42:25.146809 bus /gobi_0: Setting Powered False 02:42:26.253693 bus /gobi_0: Setting Powered False 02:42:27.364334 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13755): Process ended prematurely: osmo-stp_10.42.42.5(pid=13755) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13755)]