Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=26683): Process ended prematurely: osmo-stp_10.42.42.5(pid=26683) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26683)]
Standard Output
---------------------------------------------- trial-2354 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 04:47:52.386707 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.398624 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:47:52.536764 tst iperf3m4.py: using LAC 19174 04:47:52.653191 tst iperf3m4.py: using RAC 49 04:47:52.769591 tst iperf3m4.py: using CellId 19174 04:47:52.885670 tst iperf3m4.py: using BVCI 19175 04:47:52.908169 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.919320 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.930419 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.941557 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.952543 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.963493 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.974682 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.985691 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.996879 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.112029 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.230226 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.350959 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.643004 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 04:47:53.777061 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:54.105506 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26669): Launched 04:47:54.379200 run iperf3-srv_10.42.42.10(pid=26670): Launched 04:47:54.574483 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 04:47:54.707295 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:55.035494 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26671): Launched 04:47:55.309236 run iperf3-srv_10.42.42.10(pid=26672): Launched 04:47:55.504473 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 04:47:55.637593 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:55.966040 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26673): Launched 04:47:56.238893 run iperf3-srv_10.42.42.10(pid=26674): Launched 04:47:56.432751 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 04:47:56.566028 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:56.893768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26675): Launched 04:47:57.166453 run iperf3-srv_10.42.42.10(pid=26676): Launched 04:47:57.360736 tst iperf3m4.py:8: start network... 04:47:57.494250 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:47:57.993760 run create_hlr_db(pid=26677): Launched 04:47:58.176925 bus /gobi_6: Setting Powered False 04:47:59.198584 run create_hlr_db(pid=26677): Terminated: ok {rc=0} 04:47:59.595740 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26679): Launched 04:47:59.890711 run osmo-hlr_10.42.42.2(pid=26680): Launched 04:48:00.005624 run osmo-stp_10.42.42.5: Starting osmo-stp 04:48:00.529314 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26682): Launched 04:48:00.825358 run osmo-stp_10.42.42.5(pid=26683): Launched 04:48:01.020613 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:48:01.624853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26685): Launched 04:48:01.767289 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:48:02.110996 run patchelf(pid=26686): Launched 04:48:02.335245 run osmo-stp_10.42.42.5(pid=26683): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26683)] 04:48:02.463794 run osmo-stp_10.42.42.5(pid=26683): stdout: | (launched: 2022-12-09_04:48:00.680137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:48:02.590973 run osmo-stp_10.42.42.5(pid=26683): stderr: | �[0;m�[38;5;43m20221209044800887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044800888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044800888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044800888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044800890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044800890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044800890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:48:02.713466 run osmo-stp_10.42.42.5(pid=26683): stdout: | (launched: 2022-12-09_04:48:00.680137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:48:02.834915 run osmo-stp_10.42.42.5(pid=26683): stderr: | �[0;m�[38;5;43m20221209044800887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044800888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044800888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044800888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044800890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044800890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044800890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:48:02.977231 run patchelf(pid=26686): Terminating (SIGINT) 04:48:03.145073 run patchelf(pid=26686): Terminated: ok {rc=0} 04:48:03.175988 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26683): Process ended prematurely: osmo-stp_10.42.42.5(pid=26683) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26683)] [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 04:48:03.185308 tst iperf3m4.py:8: Test FAILED (10.8 sec) 04:48:03.245821 run osmo-hlr_10.42.42.2(pid=26680): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26680)] 04:48:03.294672 run osmo-hlr_10.42.42.2(pid=26680): stdout: | (launched: 2022-12-09_04:47:59.745686) 04:48:03.344403 run osmo-hlr_10.42.42.2(pid=26680): stderr: | �[0;m�[1;31m20221209044759924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209044759924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209044759924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209044759924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209044759924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209044759924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209044759936 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209044759946 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209044759946 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209044759946 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:48:03.386863 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26669): Terminating (SIGTERM) 04:48:03.426413 run iperf3-srv_10.42.42.10(pid=26670): Terminating (SIGTERM) 04:48:03.465739 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26671): Terminating (SIGTERM) 04:48:03.505073 run iperf3-srv_10.42.42.10(pid=26672): Terminating (SIGTERM) 04:48:03.544500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26673): Terminating (SIGTERM) 04:48:03.583713 run iperf3-srv_10.42.42.10(pid=26674): Terminating (SIGTERM) 04:48:03.623143 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26675): Terminating (SIGTERM) 04:48:03.662430 run iperf3-srv_10.42.42.10(pid=26676): Terminating (SIGTERM) 04:48:03.701810 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26679): Terminating (SIGTERM) 04:48:03.741155 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26682): Terminating (SIGTERM) 04:48:03.780459 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26685): Terminating (SIGTERM) 04:48:03.789709 --- ParallelTerminationStrategy: PID 26669 died... 04:48:03.843085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26669): Terminated: ok {rc=0} 04:48:03.852680 --- ParallelTerminationStrategy: PID 26670 died... 04:48:03.905418 run iperf3-srv_10.42.42.10(pid=26670): Terminated {rc=256} 04:48:03.914927 --- ParallelTerminationStrategy: PID 26671 died... 04:48:03.967925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26671): Terminated: ok {rc=0} 04:48:03.977883 --- ParallelTerminationStrategy: PID 26672 died... 04:48:04.030833 run iperf3-srv_10.42.42.10(pid=26672): Terminated {rc=256} 04:48:04.040367 --- ParallelTerminationStrategy: PID 26673 died... 04:48:04.093136 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26673): Terminated: ok {rc=0} 04:48:04.102723 --- ParallelTerminationStrategy: PID 26674 died... 04:48:04.155580 run iperf3-srv_10.42.42.10(pid=26674): Terminated {rc=256} 04:48:04.165137 --- ParallelTerminationStrategy: PID 26675 died... 04:48:04.217820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26675): Terminated: ok {rc=0} 04:48:04.227432 --- ParallelTerminationStrategy: PID 26676 died... 04:48:04.280731 run iperf3-srv_10.42.42.10(pid=26676): Terminated {rc=256} 04:48:04.290145 --- ParallelTerminationStrategy: PID 26679 died... 04:48:04.342830 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26679): Terminated: ok {rc=0} 04:48:04.352451 --- ParallelTerminationStrategy: PID 26682 died... 04:48:04.405293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26682): Terminated: ok {rc=0} 04:48:04.414727 --- ParallelTerminationStrategy: PID 26685 died... 04:48:04.467533 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26685): Terminated: ok {rc=0} 04:48:04.556325 bus /gobi_4: Setting Powered False 04:48:05.660402 bus /gobi_4: Setting Powered False 04:48:06.771634 bus /gobi_1: Setting Powered False 04:48:07.873251 bus /gobi_1: Setting Powered False 04:48:08.984611 bus /gobi_0: Setting Powered False 04:48:10.089894 bus /gobi_0: Setting Powered False 04:48:11.198431 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26683): Process ended prematurely: osmo-stp_10.42.42.5(pid=26683) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26683)]