Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31682): Process ended prematurely: osmo-stp_10.42.42.5(pid=31682) [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31682)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 05:53:35.343501 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.354496 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:53:35.512660 tst cs_paging_gprs_active.py: using LAC 19382 05:53:35.633997 tst cs_paging_gprs_active.py: using RAC 2 05:53:35.753725 tst cs_paging_gprs_active.py: using CellId 19382 05:53:35.886690 tst cs_paging_gprs_active.py: using BVCI 19383 05:53:35.910522 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.921442 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.932151 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.943184 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.954203 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.965195 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.976161 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.987281 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:53:35.998602 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:53:36.120871 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:53:36.406870 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:53:36.536343 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:53:36.857939 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31672): Launched 05:53:37.126050 run iperf3-srv_10.42.42.10(pid=31673): Launched 05:53:37.314923 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:53:37.444172 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:53:37.766601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31674): Launched 05:53:38.033688 run iperf3-srv_10.42.42.10(pid=31675): Launched 05:53:38.222183 tst cs_paging_gprs_active.py:38: start network... 05:53:38.362951 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:53:38.895527 run create_hlr_db(pid=31676): Launched 05:53:39.087258 bus /gobi_6: Setting Powered False 05:53:40.108891 run create_hlr_db(pid=31676): Terminated: ok {rc=0} 05:53:40.549680 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31678): Launched 05:53:40.881546 run osmo-hlr_10.42.42.2(pid=31679): Launched 05:53:41.001565 run osmo-stp_10.42.42.5: Starting osmo-stp 05:53:41.577171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31681): Launched 05:53:41.909766 run osmo-stp_10.42.42.5(pid=31682): Launched 05:53:42.029856 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:53:42.609629 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31684): Launched 05:53:42.728265 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:53:43.018171 run patchelf(pid=31685): Launched 05:53:43.212083 run osmo-stp_10.42.42.5(pid=31682): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31682)] 05:53:43.354211 run osmo-stp_10.42.42.5(pid=31682): stdout: | (launched: 2022-12-09_05:53:41.746621) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:53:43.496416 run osmo-stp_10.42.42.5(pid=31682): stderr: | �[0;m�[38;5;43m20221209055341942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055341942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055341942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055341943 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055341945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055341945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055341945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:53:43.634528 run osmo-stp_10.42.42.5(pid=31682): stdout: | (launched: 2022-12-09_05:53:41.746621) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:53:43.771115 run osmo-stp_10.42.42.5(pid=31682): stderr: | �[0;m�[38;5;43m20221209055341942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055341942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055341942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055341943 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055341945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055341945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055341945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:53:43.929866 run patchelf(pid=31685): Terminating (SIGINT) 05:53:44.116115 run patchelf(pid=31685): Terminated: ok {rc=0} 05:53:44.150284 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31682): Process ended prematurely: osmo-stp_10.42.42.5(pid=31682) [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31682)] [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 05:53:44.160055 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:53:44.224265 run osmo-hlr_10.42.42.2(pid=31679): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31679)] 05:53:44.276715 run osmo-hlr_10.42.42.2(pid=31679): stdout: | (launched: 2022-12-09_05:53:40.718413) 05:53:44.329869 run osmo-hlr_10.42.42.2(pid=31679): stderr: | �[0;m�[1;31m20221209055340921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209055340921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209055340921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209055340921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209055340921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209055340921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209055340934 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209055340942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209055340943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209055340943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:53:44.375413 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31672): Terminating (SIGTERM) 05:53:44.418266 run iperf3-srv_10.42.42.10(pid=31673): Terminating (SIGTERM) 05:53:44.461259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31674): Terminating (SIGTERM) 05:53:44.504220 run iperf3-srv_10.42.42.10(pid=31675): Terminating (SIGTERM) 05:53:44.547235 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31678): Terminating (SIGTERM) 05:53:44.590267 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31681): Terminating (SIGTERM) 05:53:44.633522 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31684): Terminating (SIGTERM) 05:53:44.643574 --- ParallelTerminationStrategy: PID 31672 died... 05:53:44.700538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31672): Terminated: ok {rc=0} 05:53:44.710855 --- ParallelTerminationStrategy: PID 31673 died... 05:53:44.767867 run iperf3-srv_10.42.42.10(pid=31673): Terminated {rc=256} 05:53:44.778155 --- ParallelTerminationStrategy: PID 31674 died... 05:53:44.834996 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31674): Terminated: ok {rc=0} 05:53:44.845284 --- ParallelTerminationStrategy: PID 31675 died... 05:53:44.901513 run iperf3-srv_10.42.42.10(pid=31675): Terminated {rc=256} 05:53:44.911934 --- ParallelTerminationStrategy: PID 31678 died... 05:53:44.968589 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31678): Terminated: ok {rc=0} 05:53:44.978938 --- ParallelTerminationStrategy: PID 31681 died... 05:53:45.035784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31681): Terminated: ok {rc=0} 05:53:45.046142 --- ParallelTerminationStrategy: PID 31684 died... 05:53:45.102700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31684): Terminated: ok {rc=0} 05:53:45.191168 bus /gobi_0: Setting Powered False 05:53:46.297819 bus /gobi_0: Setting Powered False 05:53:47.410934 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31682): Process ended prematurely: osmo-stp_10.42.42.5(pid=31682) [trial-2355↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31682)]