Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6562): Process ended prematurely: osmo-stp_10.42.42.5(pid=6562) [trial-2356↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6562)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:20:48.254750 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.266450 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:20:48.436702 tst cs_paging_gprs_active.py: using LAC 19843 07:20:48.566777 tst cs_paging_gprs_active.py: using RAC 208 07:20:48.700937 tst cs_paging_gprs_active.py: using CellId 19843 07:20:48.829132 tst cs_paging_gprs_active.py: using BVCI 19844 07:20:48.854553 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.866024 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.877366 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.888687 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.899914 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.911344 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.922860 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.934154 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:20:48.945634 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:20:49.065412 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:20:49.368684 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:20:49.507935 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:20:49.854114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6552): Launched 07:20:50.142350 run iperf3-srv_10.42.42.10(pid=6553): Launched 07:20:50.347174 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:20:50.486627 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:20:50.831860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6554): Launched 07:20:51.121835 run iperf3-srv_10.42.42.10(pid=6555): Launched 07:20:51.326024 tst cs_paging_gprs_active.py:38: start network... 07:20:51.465670 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:20:51.998730 run create_hlr_db(pid=6556): Launched 07:20:52.190326 bus /gobi_6: Setting Powered False 07:20:53.213843 run create_hlr_db(pid=6556): Terminated: ok {rc=0} 07:20:53.657326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6558): Launched 07:20:53.991599 run osmo-hlr_10.42.42.2(pid=6559): Launched 07:20:54.113212 run osmo-stp_10.42.42.5: Starting osmo-stp 07:20:54.692235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6561): Launched 07:20:55.026830 run osmo-stp_10.42.42.5(pid=6562): Launched 07:20:55.148073 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:20:55.730313 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6564): Launched 07:20:55.849412 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:20:56.140813 run patchelf(pid=6565): Launched 07:20:56.335045 run osmo-stp_10.42.42.5(pid=6562): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6562)] 07:20:56.476649 run osmo-stp_10.42.42.5(pid=6562): stdout: | (launched: 2022-12-09_07:20:54.861874) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:20:56.618602 run osmo-stp_10.42.42.5(pid=6562): stderr: | �[0;m�[38;5;43m20221209072055056 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209072055056 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209072055056 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209072055057 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209072055057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209072055057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209072055057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:20:56.756020 run osmo-stp_10.42.42.5(pid=6562): stdout: | (launched: 2022-12-09_07:20:54.861874) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:20:56.892327 run osmo-stp_10.42.42.5(pid=6562): stderr: | �[0;m�[38;5;43m20221209072055056 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209072055056 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209072055056 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209072055057 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209072055057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209072055057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209072055057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:20:57.051160 run patchelf(pid=6565): Terminating (SIGINT) 07:20:57.237281 run patchelf(pid=6565): Terminated: ok {rc=0} 07:20:57.271310 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6562): Process ended prematurely: osmo-stp_10.42.42.5(pid=6562) [trial-2356↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6562)] [trial-2356↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:20:57.281443 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 07:20:57.345186 run osmo-hlr_10.42.42.2(pid=6559): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6559)] 07:20:57.397160 run osmo-hlr_10.42.42.2(pid=6559): stdout: | (launched: 2022-12-09_07:20:53.827319) 07:20:57.449520 run osmo-hlr_10.42.42.2(pid=6559): stderr: | �[0;m�[1;31m20221209072054028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209072054028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209072054028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209072054028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209072054028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209072054028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209072054043 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209072054053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209072054054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209072054054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:20:57.494539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6552): Terminating (SIGTERM) 07:20:57.536624 run iperf3-srv_10.42.42.10(pid=6553): Terminating (SIGTERM) 07:20:57.578681 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6554): Terminating (SIGTERM) 07:20:57.620487 run iperf3-srv_10.42.42.10(pid=6555): Terminating (SIGTERM) 07:20:57.662463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6558): Terminating (SIGTERM) 07:20:57.704359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6561): Terminating (SIGTERM) 07:20:57.746362 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6564): Terminating (SIGTERM) 07:20:57.755990 --- ParallelTerminationStrategy: PID 6552 died... 07:20:57.812742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6552): Terminated: ok {rc=0} 07:20:57.822922 --- ParallelTerminationStrategy: PID 6553 died... 07:20:57.878880 run iperf3-srv_10.42.42.10(pid=6553): Terminated {rc=256} 07:20:57.888915 --- ParallelTerminationStrategy: PID 6554 died... 07:20:57.945056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6554): Terminated: ok {rc=0} 07:20:57.955084 --- ParallelTerminationStrategy: PID 6555 died... 07:20:58.010912 run iperf3-srv_10.42.42.10(pid=6555): Terminated {rc=256} 07:20:58.021057 --- ParallelTerminationStrategy: PID 6558 died... 07:20:58.076866 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6558): Terminated: ok {rc=0} 07:20:58.086921 --- ParallelTerminationStrategy: PID 6561 died... 07:20:58.142844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6561): Terminated: ok {rc=0} 07:20:58.152906 --- ParallelTerminationStrategy: PID 6564 died... 07:20:58.208701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6564): Terminated: ok {rc=0} 07:20:58.296664 bus /gobi_0: Setting Powered False 07:20:59.404911 bus /gobi_0: Setting Powered False 07:21:00.514347 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6562): Process ended prematurely: osmo-stp_10.42.42.5(pid=6562) [trial-2356↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6562)]