Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.iperf3.py (from gprs_trx-b200)

Failing for the past 39 builds (Since #2318 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=6367): Process ended prematurely: osmo-stp_10.42.42.5(pid=6367) [trial-2356↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6367)]

Standard Output

----------------------------------------------
trial-2356 gprs:trx-b200 iperf3.py
----------------------------------------------
07:17:59.606853 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:59.618434 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
07:17:59.763219 tst                        iperf3.py: using LAC 19829
07:17:59.886142 tst                        iperf3.py: using RAC 194
07:18:00.007114 tst                        iperf3.py: using CellId 19829
07:18:00.133289 tst                        iperf3.py: using BVCI 19830
07:18:00.156934 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.167776 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.178478 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.189275 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.200360 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.211107 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.222087 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.232495 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:18:00.244176 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
07:18:00.545731 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
07:18:00.685414 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:18:01.062914 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6359): Launched
07:18:01.360643 run iperf3-srv_10.42.42.10(pid=6360): Launched
07:18:01.559483 tst                      iperf3.py:8: start network...
07:18:01.696770 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:18:02.234538 run          create_hlr_db(pid=6361): Launched
07:18:02.414245 bus                          /gobi_6: Setting Powered False
07:18:03.435421 run          create_hlr_db(pid=6361): Terminated: ok {rc=0}
07:18:03.848287 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6363): Launched
07:18:04.158185 run    osmo-hlr_10.42.42.2(pid=6364): Launched
07:18:04.278478 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:18:04.824367 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6366): Launched
07:18:05.135678 run    osmo-stp_10.42.42.5(pid=6367): Launched
07:18:05.249251 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:18:05.788195 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6369): Launched
07:18:05.898546 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:18:06.170469 run               patchelf(pid=6370): Launched
07:18:06.351588 run    osmo-stp_10.42.42.5(pid=6367): ERR: Terminated: ERROR {rc=1}  [trial-2356↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6367)]
07:18:06.484314 run    osmo-stp_10.42.42.5(pid=6367): stdout: 
| (launched: 2022-12-09_07:18:04.982402)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:18:06.617233 run    osmo-stp_10.42.42.5(pid=6367): stderr: 
| �[0;m�[38;5;43m20221209071805154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209071805154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209071805154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209071805154 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209071805155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209071805155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209071805155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:18:06.745697 run    osmo-stp_10.42.42.5(pid=6367): stdout: 
| (launched: 2022-12-09_07:18:04.982402)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:18:06.872889 run    osmo-stp_10.42.42.5(pid=6367): stderr: 
| �[0;m�[38;5;43m20221209071805154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209071805154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209071805154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209071805154 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209071805155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209071805155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209071805155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:18:07.020404 run               patchelf(pid=6370): Terminating (SIGINT)
07:18:07.193451 run               patchelf(pid=6370): Terminated: ok {rc=0}
07:18:07.225143 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6367): Process ended prematurely: osmo-stp_10.42.42.5(pid=6367) [trial-2356↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6367)]  [trial-2356↪gprs:trx-b200↪iperf3.py:8]
07:18:07.234378 tst                      iperf3.py:8: Test FAILED (7.7 sec)
07:18:07.295105 run    osmo-hlr_10.42.42.2(pid=6364): ERR: Terminated: ERROR {rc=237}  [trial-2356↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6364)]
07:18:07.344252 run    osmo-hlr_10.42.42.2(pid=6364): stdout: 
| (launched: 2022-12-09_07:18:04.005456) 
07:18:07.394011 run    osmo-hlr_10.42.42.2(pid=6364): stderr: 
| �[0;m�[1;31m20221209071804181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209071804181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209071804181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209071804182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209071804182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209071804182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209071804194 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209071804202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209071804202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209071804202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:18:07.436237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6359): Terminating (SIGTERM)
07:18:07.476330 run iperf3-srv_10.42.42.10(pid=6360): Terminating (SIGTERM)
07:18:07.521844 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6363): Terminating (SIGTERM)
07:18:07.564939 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6366): Terminating (SIGTERM)
07:18:07.607056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6369): Terminating (SIGTERM)
07:18:07.616790 ---      ParallelTerminationStrategy: PID 6359 died...
07:18:07.673646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6359): Terminated: ok {rc=0}
07:18:07.683947 ---      ParallelTerminationStrategy: PID 6360 died...
07:18:07.740422 run iperf3-srv_10.42.42.10(pid=6360): Terminated {rc=256}
07:18:07.750609 ---      ParallelTerminationStrategy: PID 6363 died...
07:18:07.806969 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6363): Terminated: ok {rc=0}
07:18:07.817203 ---      ParallelTerminationStrategy: PID 6366 died...
07:18:07.873468 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6366): Terminated: ok {rc=0}
07:18:07.883548 ---      ParallelTerminationStrategy: PID 6369 died...
07:18:07.939798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6369): Terminated: ok {rc=0}
07:18:08.027799 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6367): Process ended prematurely: osmo-stp_10.42.42.5(pid=6367) [trial-2356↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6367)]