Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=20906): Process ended prematurely: osmo-stp_10.42.42.5(pid=20906) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20906)]
Standard Output
---------------------------------------------- trial-2357 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 09:35:51.824767 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:51.837033 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:35:51.974941 tst iperf3.py: using LAC 20556 09:35:52.093734 tst iperf3.py: using RAC 156 09:35:52.215557 tst iperf3.py: using CellId 20556 09:35:52.340638 tst iperf3.py: using BVCI 20557 09:35:52.363752 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.375524 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.386977 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.398438 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.409806 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.421243 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.432690 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.444009 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:52.455520 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:35:52.753781 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:35:52.888798 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:35:53.222158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20898): Launched 09:35:53.501004 run iperf3-srv_10.42.42.10(pid=20899): Launched 09:35:53.698926 tst iperf3.py:8: start network... 09:35:53.833922 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:35:54.344025 run create_hlr_db(pid=20900): Launched 09:35:54.531901 bus /gobi_6: Setting Powered False 09:35:55.551790 run create_hlr_db(pid=20900): Terminated: ok {rc=0} 09:35:55.956588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20902): Launched 09:35:56.260269 run osmo-hlr_10.42.42.2(pid=20903): Launched 09:35:56.372374 run osmo-stp_10.42.42.5: Starting osmo-stp 09:35:56.897322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20905): Launched 09:35:57.201312 run osmo-stp_10.42.42.5(pid=20906): Launched 09:35:57.311311 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:35:57.839576 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20908): Launched 09:35:57.947282 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:35:58.210961 run patchelf(pid=20909): Launched 09:35:58.387892 run osmo-stp_10.42.42.5(pid=20906): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20906)] 09:35:58.517268 run osmo-stp_10.42.42.5(pid=20906): stdout: | (launched: 2022-12-09_09:35:57.051293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:35:58.646999 run osmo-stp_10.42.42.5(pid=20906): stderr: | �[0;m�[38;5;43m20221209093557222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209093557222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209093557222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209093557222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209093557223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209093557223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209093557223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:35:58.772080 run osmo-stp_10.42.42.5(pid=20906): stdout: | (launched: 2022-12-09_09:35:57.051293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:35:58.896080 run osmo-stp_10.42.42.5(pid=20906): stderr: | �[0;m�[38;5;43m20221209093557222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209093557222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209093557222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209093557222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209093557223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209093557223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209093557223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:35:59.040789 run patchelf(pid=20909): Terminating (SIGINT) 09:35:59.210844 run patchelf(pid=20909): Terminated: ok {rc=0} 09:35:59.242094 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20906): Process ended prematurely: osmo-stp_10.42.42.5(pid=20906) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20906)] [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 09:35:59.251388 tst iperf3.py:8: Test FAILED (7.5 sec) 09:35:59.311160 run osmo-hlr_10.42.42.2(pid=20903): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20903)] 09:35:59.360493 run osmo-hlr_10.42.42.2(pid=20903): stdout: | (launched: 2022-12-09_09:35:56.110817) 09:35:59.410073 run osmo-hlr_10.42.42.2(pid=20903): stderr: | �[0;m�[1;31m20221209093556286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209093556286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209093556286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209093556286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209093556286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209093556286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209093556303 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209093556314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209093556314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209093556315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:35:59.451817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20898): Terminating (SIGTERM) 09:35:59.491372 run iperf3-srv_10.42.42.10(pid=20899): Terminating (SIGTERM) 09:35:59.530954 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20902): Terminating (SIGTERM) 09:35:59.570751 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20905): Terminating (SIGTERM) 09:35:59.610273 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20908): Terminating (SIGTERM) 09:35:59.619348 --- ParallelTerminationStrategy: PID 20898 died... 09:35:59.672096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20898): Terminated: ok {rc=0} 09:35:59.681964 --- ParallelTerminationStrategy: PID 20899 died... 09:35:59.734450 run iperf3-srv_10.42.42.10(pid=20899): Terminated {rc=256} 09:35:59.743875 --- ParallelTerminationStrategy: PID 20902 died... 09:35:59.796462 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20902): Terminated: ok {rc=0} 09:35:59.806063 --- ParallelTerminationStrategy: PID 20905 died... 09:35:59.858866 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20905): Terminated: ok {rc=0} 09:35:59.868331 --- ParallelTerminationStrategy: PID 20908 died... 09:35:59.921651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20908): Terminated: ok {rc=0} 09:36:00.009323 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20906): Process ended prematurely: osmo-stp_10.42.42.5(pid=20906) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20906)]